I'm an AMS Design engineer. I like the IC design world and my recent goal is to be a scientist :)
I have been working on Analog/Mixed-Signal Integrated Circuits design since last 16 years. I graduated from NED UET, Karachi in 2001 and then worked with Avaz Networks, a Silicon-Valley Company on RTL design and verification of a high-density Line Echo Cancellation Engine for a couple of years. Joined Linkoping University, Sweden in 2003 for Masters in SOC, which concluded with a Masters Thesis on Sigma-Delta Modulators with Fraunhofer Institute of Integrated Circuits, Germany in 2005. The same year I joined University of Trento and Fondazione Bruno Kessler, Trento, Italy for my PhD on Readout Interface Design for MEMS Capacitive Microphones. Worked with ST-Microelectronics, Milano and Analog-Devices, Copenhagen as a Guest PhD Student. This Phd results in 20+ publications and 2 patents with 3 successful MEMS Readout ASICs.
I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.
I have more than five years’ experience in electronics integrated circuits industry. I have been involved in more than six silicon runs which were all successful and meeting expectations.
I am a experienced analog and mixed-signal circuits designer, using standard and/or custom circuits ( external IPs or from my own design ).
Developer of open source EDA tools on Open Circuit Design
Analog IC design engineer with expertise in designing analog building blocks variable gain amplifiers, active filters, frequency synthesizer (integer-N PLLs), voltage regulators.
Valparaiso University - College of Engineering - ECE professor
I am a full custom analog and mixed-signal IC design consultant. I have been consulting for over 22 years following 12 years as a staff member at MIT Lincoln Laboratory.
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Working as a instruments engineer, and currently working on my masters of Microelectronic Systems Design. Passionate about designing analog/mixed signal IC's and systems
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
Analog full custom design experience of Low power VOltage regulators, Bandgap reference, calibration circuits and common mode receiver. worked on SERDES IP (up to 12Gbps) compliant with USB 3.1 and SATA protocols. AS ESD ENgineer for SERDES IP Improved existing ESD network simulation strategy and ESD network for robust ESD performance reliability and automated existing current density flow for ESD for better efficiency. Technology Nodes: 14nm(FINFet), 28nm(FDSOI) 28 nm,40nm,90nm,180nm (Bulk)
Analog Designer
I am an EMC Specialist working at Renault and currently looking to fill my free time with interesting projects (Hardware, EMC, Design, Simulation)
Power IC designer for 27 years primarily in Silicon Valley.
I am a RD designer focus on power management ic design. I have about ten years working experience. Hope I can do something for this great platform ~ !
Experienced Analog/RF integrated circuit design
Analog/Mixed-Signal IC Design Engineer
Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.
fresh. grad electronics and communication engineering minia university advanced analog CMOS circuit design
Interested in Analog IC Design
As an experienced Electronic Engineer with a solid foundation in FPGA design, embedded systems, and IoT, I specialize in high-level hardware programming and real-time signal processing. With expertise in RTL, RISC-V, Verilog, SystemVerilog, and VHDL, I bring a robust understanding of digital design to my work. My professional background includes over a decade in the PCBA assembly industry, where I programmed and configured SPI and Chip Mounter machines, managed production processes, and handled CAD and Gerber files for precision assembly. Additionally, I am well-versed in designing and testing complex circuits using tools like Proteus, Fritzing, and Altium, with a particular interest in the emerging role of AI in electronics. As a career coordinator, former educator in electronics, and an active researcher, I blend practical industry experience with a passion for fostering innovation and teaching in the electronics field. My recent projects involve integrating IoT with embedded solutions, exploring the intersection of FPGA technology with real-time applications, and continually expanding my knowledge in artificial intelligence.
Design Consultant
Taher Kourany joined Scenario Design Services, Cairo, Egypt as a Senior IC Design Consultant in 2016. He received B.Sc Degree in electronics and communications engineering from Ain-Shams University, Cairo, Egypt, in 2012. He received M.S. degree in electronics from the American University, Cairo, Egypt, in 2015. Until October 2015 he was a Research Assistant with the Center of Nanoelectonics and Devices Research Labs at Zewail City for Science and Technology. Mr. Kourany has published papers in the field of time complexity reduction algorithms of floorplan representations, area and wirelength minimization, Pareto-front multi-objective optimization algorithms of highly chaotic systems. His current research interests include high linearity Power Amplifiers, time complexity reduction algorithms, data structures, parameters estimation of highly chaotic systems, and the synthesis of analog IC design and layout.
Graduated as electronic engineer in '93. Think it could be nice and fun to try out this part of the electronic life/world :). I have worked a lot with digital designs over the years, everything from small LED controllers to larger computer boards. And then I am a PCB geek.
Abdullah Muammar is a university student who loves learning in many areas of life
