im a student who want learn design VHDL
I am a software developer, trying to learn about hardware design
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
I am a Master Degree holder in VLSI Design. I am interested in Analog Circuit Design.
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
IC Design Engineer
Enthusiastic analog designer
I am an Analog IC Designer by profession. I have loved and done circuit design from my high school days in India. I love developing new challenging circuits and seeing them work in real applications.
I am researcher with goals of developing high end technologies for the future.
Principle Engineer at efabless corporation
Physical design engineer
An experimental physicist through sensor and instrumentation development.
I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.
Professor Emeritus from Georgia Institute of Technology. Developer and lecturer on analog integrated circuit design.
Principal Engineer at ONiO AS
I am a senior Electronics and Communications Engineering student at the Faculty of Engineering, Ain Shams University, Cairo, Egypt. I have wide knowledge and some experience in analog electronics with huge passion towards it
I am an experienced semiconductor expert with twenty years of experience both in top semiconductor companies such as Sony, National Semiconductor, Analog Devices, and Cambridge Silicon Radio and much smaller companies such as Pericom and Theta Microelectronics. I designed high-volume products for customers including Quantum, Western Digital, Hewlett-Packard and Nokia. I also acted as an expert evaluator for European Union H2020 framework project calls and EURIPIDES research frameworks. Specialities: CMOS/BiCMOS, SOI CMOS analogue and radio-frequency integrated circuit design: Millimetre-wave phase shifters, vector modulators, attenuators, Phased-array transceivers, LNA (Bluetooth, FM, 802.11n) Mixer (100MHz to 4GHz) Limiting Amplifiers for optical communication circuits, Transimpedance Amplifiers, Low-power RF Amplifiers Hard-disk preamplifiers, Clock and Data Recovery (CDR) circuits, High-speed output drivers (CML), Sigma-delta converters. Xtal Oscillators, Ultra-low power CMOS circuits for RFID transponders CMOS RF-DC Energy Harvesting circuits
Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.
I am currently an Associate Professor in the Electrical and Computer Engineering Department at North Carolina Agricultural and Technical State University (NC A&T). As director of the Automated Design for Emerging Process Technologies (ADEPT) laboratory at NC A&T, I research the following questions: (1) how can we make computers more reliable in harsh environments (i.e., ionizing particles, malicious fault injection) and (2) how can we extend Moore’s law (e.g., 3D IC)? To answer these questions, he interrogates the traditional abstraction layers of integrated circuit design (i.e., functional description, circuit design, physical design) to discover design methodologies that are more relevant to these goals.
Research Scholar | Analog Circuits | EMI Immune Amplifiers | Neuromorphic Circuits
Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
Assistant Professor (IISc) | Ph.D. & S.M. (MIT) | B.Tech. (IIT-KGP)
I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/
Motor control group at EE, UET strives to develop technologies in the domain of DC motor control, closed loop (PID) servo control, 3-phase AC (PMSM, ACIM) FOC control, targeting home appliances, industrial, robotic and EV applications.
More than 14 years of experience in Electronic Design Automation roles with leading industry companies like Intel, Samsung and others. Have a strong background in EDA best practices and technologies like DRC, LVS, XRC, PERC and others. Have a mixed background in circuit. design, data science and programming with emphasis on data analysis for microchip design. Have strong background leading project deliveries to fortune 100 companies in the world. B.Sc. in Electrical Engineering from faculty of Engineering, Ain Shams University, Cairo, Egypt.
Professor of CSE at UC Santa Cruz
MS ECE (Nanoscale devices and systems) at UCSD
Graduate research assistant at the University of Mississippi
Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.
I am passionate about all areas of VLSI Design and trying my level best to be an expert in the entire flow, analog, digital and mixed signal. Beyond chips, I like poetry, skating, skydiving, late night swimming and trekking in no particular order.
I’m a research student at Odisha University of Technology and Research working for better understanding of Low Power Electronics Circuit . My research and career interests lie in the Application specific Integrated circuits and Analog Mixed Signal with expertise in circuit design and programming. With a board skill set covering the important facts in the semiconductor industries, I am looking for exciting opportunities in the same. I enjoy generating new ideas and devising feasible solutions to broadly relevant problems. My colleagues would describe me as a driven, resourceful individual who maintains a positive, proactive attitude when faced with adversity. Currently, I’m seeking opportunities that will allow me to develop and promote technologies that benefit human society.
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
I am a VLSI enthusiast looking for an opportunity to make my career as a Design engineer in the Hardware Industry.
Ph.D Student studying analog/mixed-signal VLSI at Brigham Young University
My name is "YERRA BHASKARA VARA PRASAD" pursuing B.tech ECE 3rd year in Rajiv Gandhi University of Technologies, Nuzvid, Andhra Pradesh 521201.
Professor for microelectronics
i am a tech enthusiastic i love exploring new circuits by designing them want to learn about this
I work with embedded systems, analog electronics and general physics research. I founded a small engineering services company in Brazil, currently working with a team of 3 engineers to create products and help companies on their way to to production.
Passionate about Digital VLSI and Hardware Accelerators. Experienced in using open-sourced tools for design and verification
I am Anuj Kumar Jha and pursuing MTech at IIIT Bangalore in VLSI
M.Tech. in VLSI DESIGN
I am extremely dedicated individual looking for an opportunity to learn and explore new ways to implement the latest technology. My dream is to join a core company and work on on-site projects. I believe my skills and hunger to learn will turn me into an important asset to the company. Thank you
Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.
Analog IC design engineer with background in sensor Front-End design and semiconductor radiation detectors.
I am a student pursuing MS(R) in Integrated circuits in Electrical Department IIT Delhi.
Computer Engineering Student and hardware design enthusiast. Enjoys programming and soldering.
Analog Mixed Signal Design Engineer
I am a student at IIIT Bangalore pursuing Integrated Mtech in Electronica and Communications Engineering and am fascinated about silicon wafers and want to pursue a career and build a revolution in this domain.
Electronics Engineer. Design Embedded Systems , Firmware professionally and fiddle with others :)
Professional Software Developer and Electronics Hobbyist
I am an electrical engineer
Assistant Professor in the Department of Electrical and Computer Engineering at The University of Mississippi
currently pursuing M.tech in VLSI design from Visveswaraya National Institute of Technology, Nagpur, India
PURSUING VLSI AT IIT BOMBAY
I am working as Assistant Professor in Electronics and Telecommunication department, Government College of Engineering Amravati M.S (India)
Senior Faculty Specialist at University of Maryland
MS Electrical Engineering Fellow with a focus on Integrated Circuits and Systems Design. Skilled in Cadence (Virtuoso, Innovus and Genus)
I am a Masters fellow student of RFCS2 Lab in IC Designing.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
I am en Electronics Engineer currently Pursuing my Masters in IC design from FAST NUCES Islamabad.
I am Dr. Naushad Alam working as an Associate Professor in the Department of Electronics Engineering, Z H College of Engineering & Technology, Aligarh Muslim University, Aligarh, India. I received B. Tech. degree in Electronics & Communication Engineering from Jamia Millia Islamia, New Delhi in 2003, and M. Tech. Degree in Electronic Circuits & Systems Design from Aligarh Muslim University, Aligarh in 2009. I earned Ph.D. degree in Microelectronics from Indian Institute of Technology Roorkee, India in 2013. My doctoral work was on nanoscale circuit design considering the impact of process-induced mechanical stress. He has published 29 papers in SCI indexed journals that include 10 IEEE Transactions and 33 papers in reputed conferences. I have supervised two PhD thesis in the area of device-circuit co-design and presently supervising two more PhD students. I have also successfully executed a UGC funded research project on TFET based SRAM cell design for IoT Applications. My research interests include device-circuit co-design, robust nanoscale circuit design, low power circuit design, PVT tolerant circuit design, Near-Threshold/Sub-Threshold circuit design etc.
Adjunct professor in Columbia University.
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Mixed-signal designer
I have been working as a Full Professor in Electronics Engineering Department, AMU, Aligarh.
Research Scholar at Department of Electrical Engineering, Indian Institute of Technology Ropar, India. Current research area is EMI Immune Amplifiers. Previous works include a Memristive adaptable ramp generator circuit for a on-chip training signal generator for trainable DAC, Modeling and hardware implementation of digital image watermarking algorithms.
An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.
Provides mixed-signal CMOS training to academia using open-source tools and also solution for the consumer and automotive industry.
RISC-V Enthusiast GSoC 2020 @ FOSSi Foundation RA @ CAD Lab, IISc Bengaluru, India EE Senior @ NITK Mangalore, India
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
current I am doing postgraduation in a Micro and Nanoelectronics
I am designed mixed signal ICs for Music, Audio, IoT and sensor applications.
I am a EE with decades of experience in multiple disciples including analog, RF, bio-engineering, embedded systems design, ... a long list. I've had a long career and am fortunate to be able to follow my interest where ever they might be.
Lecturer at the Department of Computer Engineering, Kwame Nkrumah University of Science and Technology, KNUST. My primary interest is in analog and mixed-signal design.
Dad. Partner. Scientist. Activist. Maker. — He/His
Electrical engineer with interests in ASIC design, biomedical imaging, and scientific instrumentation.
I'm a PhD student working to make mixed-signal chip design more accessible, drawing inspiration from software development techniques. Prior to starting the PhD program, I spent a number of years working in industry at both the chip- and PCB-level on optical sensors and power systems.
Dr Tapas Kumar Maiti, a former associate professor at Hiroshima University Japan, moved to DA-IICT India where he is a faculty member, since June 2019. He was a visiting faculty to IIEST-Shibpur. He has amazing research experience at McMaster University, Canada and IIT-Kharagpur. He has published more than 100 papers in reputed journals and conferences, and also co-authored a book. He received ICMM Excellent Presentation Award, IAAM Scientist Medal, and University Gold Medal. He is a member of IEEE, and Life Member of IEI. Currently, he is working in the areas of Intelligent Computing Devices, Robotics, and Cybernetics.
I am a fresher interested in VLSI design. I have completed my Masters in VLSI Systems Design in the year 2020.
RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.
I am currently a postgraduate student at the University of Calcutta and graduate with a Bachelor of Science Degree in Electronics, which will broaden my aptitude in numerous aspects. The curriculum is designed for proficiency in problem-solving techniques, organizational skills, and other mechanics that will help me to execute solutions. Which gives me the opportunity to explore in-depth learning experiences in various technology. I am interested in astrophysics, radio astronomy, solar physics, and other space and atmospheric research, also in semiconductor physics and VlSI technology.
I'm currently a PhD candidate at Stanford studying Electrical Engineering with Prof. Priyanka Raina. I graduated from Princeton with high honors in Electrical Engineering and certificates in Applications of Computing and Engineering Physics. I completed my Stanford M.S. degree in EE; my current PhD research focuses on emerging memory/circuit technologies (resistive RAM/NEM relays) and efficient reconfigurable computing (FPGAs/CGRAs). I consider myself an eclectic learner who has never been satisfied to work in just a single area. In the past, I've done research projects across an extremely wide array of subjects, including oxide nanoelectronics (Prof. Patrick Irvin, Pitt), stochastic simulation of biochemical processes (Prof. Marcus Dittrich, PSC), deep learning applied to petroleum well data (Prof. Verena Kaynig-Fittkau, Harvard/QRI), and development of quantum cascade devices in group-IV materials (Prof. Claire Gmachl, Princeton). My senior thesis at Princeton with Prof. Prateek Mittal was focused on privacy threats posed by Content Delivery Networks. I've also worked as a software intern at two companies, GoFundMe and Amazon; there, I took on data science and analytics problems affecting business. Recently, I completed an (entirely virtual!) internship at NVIDIA focused on improving circuit design with AI. Additionally, I have several personal projects I'm proud of: an analytics engine for online Set! to understand how people learn the card game, enabling Amazon Alexa home assistants to rap battle each other, studying graph techniques for understanding musical collaborations... and so on. I love meeting/hearing ideas from new people, so feel free to contact me. Cheers!
I'm the CEO of a fabless semiconductor start-up company and have more than 15 years experience in designing mixed-signal ASICs on various foundry processes.
I am Full Professor and Head in the Department of ECE, NEHU, Shillong. My research area is Silicon Photonics, Optical Communication, Photonic Integrated Circuits.
Professor Alex James received the Ph.D. degree from the Queensland Micro and Nanotechnology Centre, Griffith University, Brisbane, QLD, Australia. He works as a Professor of AI hardware at School of Electronic Systems and Automation, and Dean (Academic) at Digital University Kerala. He works in the broad area of brain-inspired systems, memristive systems, intelligent semiconductor devices, analog circuits and imaging systems. He is Prof-in-charge of Maker Village that supports over 80+ hardware startups. He is Chief Investigator of the centre for Intelligent IoT Sensors, and India Innovation Centre for Graphene, developing new products to the market. Dr. James was the founding chair for IEEE Kerala Section Circuits and Systems Society. He is a member of IEEE CASS Technical committee on Nonlinear Circuits and Systems, IEEE CASS Technical committee on Cellular Nanoscale Networks and Memristor Array Computing, IEEE Consumer Technology Society Technical Committee on Quantum in Consumer Technology (QCT), Technical Committee on Machine learning, Deep learning and AI in CE (MDA) , Member of BCS’ Fellows Technical Advisory Group (F-TAG) and Member of SIG on Electronics for Agrifood.
I am a current Master's student in IC (Integrated Circuit) and Systems Design, as well as a Research Assistant at the Micro Nanoelectronics (MiNE) Lab located at SEECS NUST. I completed my Bachelor's degree in Electronics Engineering from UET Peshawar. As a member of the MiNE Lab team, I am involved in cutting-edge research in the field of micro and nanoelectronics, with a specific focus on the design and development of integrated circuits and systems. My academic and research background has provided me with a strong foundation in electronics engineering, and I am passionate about utilizing my skills to contribute to the development of innovative technologies in this field.
BOC Sciences provides a wide range of research chemicals and biochemicals including inhibitors, building blocks, carbohydrates, nucleosides, nucleotides, GMP Products, impurities and metabolites, APIs, natural compounds, ADCs, stem cell molecule and chiral compounds. BOC Sciences specializes in small molecules synthesis, biosynthesis, purification and characterization. We have been supplying high quality products for our esteemed customers in academia, pharmaceuticals, biotech, CDMO, material sciences and agriculture industry to support their research and production needs. We work closely with our synthetic laboratories, fermentation labs, OEM and global partners and proudly offer a full range of product portfolio.
Researcher at Indian Institute of Technology, Bombay
I'm a Graduate Research and Teaching Assistant at Oregon State University.
Designer creating analogue circuits for instrumentation used in medical and physical sciences.
PRODUCTS AND CONSULTING IN AEROSPACE, SEMICONDUCTORS, SAAS, ROBOTIC EQUIPMENTS, COMPUTE SYSTEMS, QUANTUM, TELECOM AND INDUSTRIAL.
Lecturer in analogue electronics at University of Strathclyde
Microwave/RF Electrical Engineer. Love learning new things.
Power electronics IC designer with in-depth experience in switched-capacitor and hybrid DC-DC converters.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. Hugo is an Analog/Mixed‐signal design engineer with strong background in IC design techniques, industry experience on ASICs for sensoring applications and hands on experience in 28nm, 55nm, 65nm, 130nm, 180nm and 0.35um CMOS process nodes. Research interests include Low power Data Converters, SAR ADCs, DACs, PLLs and Low power analog design.
I am into Analog and Mixed Signal designs. I have been involved in creating ASICs for 30 years.
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
We are an undergraduate chip design team at Cornell University dedicated to open-source design!
Senior security researcher, compiler/binary hacker, NFC ninja, hardware hacker with a FPGA hammer. Previously Pay Security.
Adjunct Professor and Chief Mentor, Advanced VLSI Lab Silicon University, Bhubaneswar, India
Founder / director of SLICE Semiconductor, specialising in analog IC design contract services and high performance mixed signal ASIC solutions.
PhD in Electrical Engineering
RTL Design, GDS, VLSI
I am a final year in BE in Electronics And Communication in Canara Engineering College