Trained as a Software Engineer, i am an advocate for Libre Ethical Technology in business.
I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.
I've been worked as an Electrical Engineer for more than 20 years. I'd like to bring Artificial Intelligence to the EE design so that it can be "Self-driving".
I am Electronic Engineer from Chile, I like DSP and radioastronomy applications an ordinary guy
I am an electronic hobbyist who enjoys building different electronic circuits and systems.
Electronics Engineer with 10 years experience in microelectronics and research. Familiar with CMOS integrated circuits design, wireless communication systems, programming and lab environment, I am comfortable working for worldwide semiconductors firms. Passionate for high-tech and music, advocate for teamwork and collective intelligence to support a strong problem-solving methodology, I am curious, self-motivated, addicted to learning and re-shaping the new technologies I am exposed to. During my workday I aspire to address "real-life problems", hopefully continuing to develop my multi-disciplinary skills as a means for technical and personal enrichment.
An experimental physicist through sensor and instrumentation development.
Expert in embedded and mobile applications since 2003. Has many years of experience in software and hardware development, effective team management. Excellent in the research and development, technology findings and implementations.
Interested in Design, Verification, and Hand-off of Analog IPs. Worked on the definition, modeling, design, verification of DC-DC converters, Chargers, Ideal-Diodes, LDOs, Regulators, Bandgap references, Current limiting and sensing architectures. Excited for challenges in Analog Design, Layout and Post-silicon verification.
Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.
EDA software engineer working on silicon CAD for Intel during the day. I've got DNA synthesis on the brain, and have been learning how to integrate micro/nano fluidics with active electronics to achieve a wholly automated "genetic compiler". Building a nano fab in my home workshop.
High Performance, High Frequency Analog, Microwave, RF and Optical Chip and Package Test Software and Hardware, Multi-Chip System Integration and Reliability
I am working at Object Automation
RF/Analog IC design and SOC
Test Engineer
William Oswald received the B.S. degree in computer engineering and the M.S. degree in electrical engineering from the University of South Alabama, in 2020 and 2021, respectively. He is currently pursuing the Ph.D. degree in systems engineering. He has worked in industry as a Systems Analyst at Packaging Corporation of America, from 2019 to 2020. His research interests include computer architecture design, machine learning, and model based systems engineering.
Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.
Electrical Engineering student at UFMG, scheduled to graduate in Dec/2022. Experience in the automotive sector by the Formula Tesla UFMG team, designing electrical and electronic systems. Exchange experience in South Africa for 3 months studying English and working voluntarily in needy settlements. Currently, work as Software Engineer at Cadence Design Systems.
electronic system designer / software and hardware engineer, embeded system expert, signal expert, proccess designer, researcher, Developer of complexity and reversal wantings. Reverse engineer. i addopt my whole life to this science. thank you for presentings of quantum, psych
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Researcher, thinker, innovator, amateur, and little science... God almighty believed
Provides mixed-signal CMOS training to academia using open-source tools and also solution for the consumer and automotive industry.
Over 25+ years of experience Silicon Engineer with focus on taking a Silicon from GDS2 to PRQ. Involved in Wafersort testing, Packaging, Packaging Testing, Silicon Characterisation - Electrical & Functional, Package Qualification, Reliablity testing and Yield management
A digital design engineer, interested in memory hierarchies and high speed interfaces.
High schools tudent
Dad. Partner. Scientist. Activist. Maker. — He/His
Hobbiest and Dabbler in all things Electronics
Osaze Shears is passionate about many engineering and computational concepts. These include embedded systems, application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and microprocessor technologies. Osaze spends his free time tutoring other students who are interested in learning to become better computer scientists and engineers to benefit the greater society. Osaze is currently a PhD student at Virginia Tech conducting research under the Multifunctional Integrated Circuits and Systems (MICS) lab. His research interests include: • Spiking Neural Networks • Hardware Acceleration • SoC Design with ASICs and FPGAs • Deep Learning • Edge Computing
I am studying artificial intelligence as my Bachelors at the Institute of Technology Deggendorf. For my further studies I want to specialise in low level chip control and hardware accelerated devices cut out for edge AI devices.
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
Sr. Electrical Engineer with 40 years of experience, doing R&D, circuit design from concept through layout and to production in Aerospace, Automotive, Industrial and Gas and Oil down-hole business sectors.
Me gusta aprender más de otros programas
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
Hao-Yen Tang received his PhD degree from UC Berkeley Advised by Prof. Bernhard E. Boser, his PhD research, PMUT ultrasonic fingerprint sensor, convince InvenSense senior management to make a heavy investment to take this technology to mass market. At InvenSense he’s leading a multi-disciplinary system team for the next generation ultrasonic fingerprint sensor bringup, characterization and calibration, coordinating the works from different field including acoustic, MEMS, CMOS, FW, and SW. Currently, he serves as CTO/Co-Founder in the startup company UltraSense Systems. The company is aiming to transform any surface material into a Touch/Press user interface with it’s proprietary PiezoMEMS-CMOS technology. Dr. Tang is the recipient of 2016 ISSCC Best Paper Award (Lewis Winner Award for Outstanding Paper), 2015 SSCS Pre-Doctoral Award and 2015 ADI Outstanding Student Designer Award. Currently he holds 20+ granted patents, 20+ publications, and 2000+ citations.
Senior security researcher, compiler/binary hacker, NFC ninja, hardware hacker with a FPGA hammer. Previously Pay Security.
