Trained as a Software Engineer, i am an advocate for Libre Ethical Technology in business.
Hi! It's good to see you being here, good to believe we have same interests. Coffee Design Debug Improve OpenSource
im a student who want learn design VHDL
Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
Cybersecurity nut, hardware hobbyist, nature enthusiast, amateur trumpet player. I also play World of Warcraft with my dad on the weekends.
Linkedin - https://www.linkedin.com/in/bhawandeep-singh-1b164517/ PhD student in CSE department in UCSC, advised by Prof. Jose Renau. My areas of majors are CPU design, digital design and embedded software.
I am a software developer, trying to learn about hardware design
10 years exp. ASIC development. MSU professor.
Aspiring analog IC designer
Teacher/researcher at the Electronics Department (DEEC) of Universidad Nacional de Tucumán, Argentina
I'm a master MIRI-HPC student of the UPC and a researcher of the ARCO group at the UPC
Analog systems and circuit design engineer with extensive product development and applications experience with a strong focus on end markets. Proven ability to work closely with a diverse set of customers and clients to properly specify the requirements of a mixed-signal ASIC. Ability to manage product development from foundry selection through design, tape-out, and mass-production.
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.
Author of Yosys, IceStorm, PicoRV32, and other Open Source things
Developer of open source EDA tools on Open Circuit Design
I'm a staff member at efabless responsible for product management, business development, strategy, partnerships.
VLSI circuit design engineer with significant experience in microprocessor design in semiconductor processes from 65nm to 10nm. Provided register file designs and design training for Intel Big Core and SOC projects. Helped create semi-automated array layout methodology. Established cross-organizational methodology for variation analysis in register files. Converged memory IP handling across multiple organizations.
Valparaiso University - College of Engineering - ECE professor
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Manager of Universal Avionics System Corporation(UASC) PLD design group. This group is tasked with designing, implementing and approving, in accordance with RTCA/DO-254 guidance, all ASIC/FPGA used in the Universal Avionics product line.
Freelancer
Embedded System Engineer
Analog Designer
I am an Electrical Engineer at Marcus Engineering working primarily on embedded systems in a wide range of applications in the Medical, Military and Aerospace sectors.
Physical Design Engineer, 5 Years of experience and always fascinate about learning new concepts. Open to understand & take participate in Open Source.
I am a digital design/verification engineer. I have 2 years of full-time industry experience. In total, I have 4.5 years of experience in RTL design, Electronic Design Automation and Verification using VHDL/Verilog, Perl, Tcl and Linux. I was the #1 graduate of Bahcesehir University in Mechatronics Engineering in 2013
I'm VLSI Design Engineer aspirant and like to work on design challenges in VLSI domain. I like to keep updated of cutting-edge technology in my field of interest.
BSEE graduating senior with a focus in digital design. I have taken coursework in Analog, Digital, Mixed Signal and RF IC design, and have experience using Cadence's tool suite as well as NI's AWR. I have also done multiple EDA centric courses in validation, formal and functional verification and Digital IC Testing
Mad about OSS system design, specialized in video compression and image processing, CNN and dedicated HPC architectures. New deals in low power design
Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.
I am a Application Engineer working for Cadence Design Systems and I facilitate the use of the Palladium Emulator at different Customers.
Current working in my PhD at BarcelonaTech.
FPGA expert, interested by opensource tools for FPGA and for ASIC
Graduated 4 tears back in engineering specialized in electronics and telecommuniation engineering with a first class. Now I am working at a startup as the team lead of the embedded design team. I am also a postgraduate student in Msc in wireless communication engineering course. Creon Solutions is my freelancer name. I do image processing, PCB and circuit designs ...etc in Freelancer.com
I've been worked as an Electrical Engineer for more than 20 years. I'd like to bring Artificial Intelligence to the EE design so that it can be "Self-driving".
I am a Master Degree holder in VLSI Design. I am interested in Analog Circuit Design.
Senior Design Engineer at NASA-Goddard., Greenbelt, MD
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
Enthusiastic analog designer
I'm hardworking, I'm smart at doing things, I'm analytical, and passionate to my work. I love to do programming.
>10 years of experience in precision analog and sensor interface IC design.
I am a senior researcher in INESC-ID, Lisbon.
Hobbyist maker interested in general electronics, with experience designing and fabricating custom circuit boards. https://tindie.com/stores/cburgess129
Digital designer experienced in high-speed ASICs for optical/copper transceivers, including DSPs, error correction and SoC support.
I am an Electronics Engineer with experience in IT Management, Firmware Development and Education. I spend my spare time looking for interesting projects and reading about technology trends.
Paulo Roberto B. de Carvalho is a Hardware and Digital IC Design Engineer with 6-years experience in microelectronic area in Digital IC Design, with specialization in RTL design optimization for area and power reduction, Verification and Physical Implementation flow. He has 10-years experience in Application Engineering, technical consultant and semiconductors manufacture processes. He received his bachelor degree in materials, processes and electronic components technology at Faculdade de Tecnologia de Sao Paulo (FATEC-SP) in 2006. In 2011, he joined the Brazillian Federal Government IC Brazil Program of the Ministry of Science, Technology and Innovation (MCTI), trained in Digital Systems Design area. He received his Master of Science degree in Electric Engineering with specialization in Microelectronic area on Integrated Systems Laboratory at Electrical Engineering Department of Polytechnic School of University of Sao Paulo in 2016.
Hardware design engineer
Learner for life
Semiconductor professional with 40 years experience. I act as a technical consultant, design consultant, or architect for SoCs, embedded systems etc.
José T. de Sousa holds a PhD degree from Imperial College London (1998) and has been a university lecturer and researcher at Lisbon University (1999-present). He holds 4 international patents, is co-author of one book, and was General Chair of the Field Programmable Logic and Applications Conference in 2013. Dr. de Sousa has published more than 70 technical papers in international journals and conferences. He was co-founder and CEO of Coreworks, a semiconductor intellectual property company, which he ran from 2001 to 2013. His specialties are digital circuit design, hardware/software architecture, technical team management and semiconductor IP marketing and sales.
Electronic design house subsidiary of Cinvestav Guadalajara Unit (Center for Research and Advanced Studies), a leading research center in Mexico.
Principle Engineer at efabless corporation
Computer Science and Mechanical Engineering student
Experienced Analog Design Engineer with strong background in HV CMOS ASICs.
Electronics Engineer with 10 years experience in microelectronics and research. Familiar with CMOS integrated circuits design, wireless communication systems, programming and lab environment, I am comfortable working for worldwide semiconductors firms. Passionate for high-tech and music, advocate for teamwork and collective intelligence to support a strong problem-solving methodology, I am curious, self-motivated, addicted to learning and re-shaping the new technologies I am exposed to. During my workday I aspire to address "real-life problems", hopefully continuing to develop my multi-disciplinary skills as a means for technical and personal enrichment.
Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.
An experimental physicist through sensor and instrumentation development.
Umer Imran is eager to work in the field of Computer Architecture and Memory Consistency. He is currently working as a Design Verification Engineer at Lampro Mellon, a training firm with the vision to transform Pakistan’s talent pool into leaders of RISC-V based SoC design. He constantly aims to gain expertise in the various domains of SoC Design including IP Design, ASICs, and low power architectures.
Professor in Electronics Engineering with a PhD. in VLSI (Universidad Nacional de Mar del Plata). Expertise in digital RTL and physical design. Experience in FPGA RTL and HLS design for heterogeneous computing. Knowledge in sub-threshold analog design. Fiction writer (National Literature Award for Novel, 2011, Costa Rica)
Expert in embedded and mobile applications since 2003. Has many years of experience in software and hardware development, effective team management. Excellent in the research and development, technology findings and implementations.
Principal Engineer at ONiO AS
I am a senior Electronics and Communications Engineering student at the Faculty of Engineering, Ain Shams University, Cairo, Egypt. I have wide knowledge and some experience in analog electronics with huge passion towards it
Research engineer and teaching assistant in microelectronic, microsystems and bioelectronic at the university of Liège, Belgium
Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.
30+ years of experience ranging across telecom, embedded systems, semiconductor, firmware development.
Self-taught Electronic Engineer with a lot of experience in programming. I consider myself creative, analytical and dynamic, through my studies I have developed the ability to face and lead changes; I am interested and committed to continuous improvement in a globalized world, both professionally and personally. Being able to contribute what I have learned and add value, thus learning from the opportunities in today's working world.
PhD Scholar at Advanced MultiCore Systems Lab, IIIT-Delhi
I am an electronics engineer currently working as an intern in STMicroelectronics.
igmGuru: We are one of the finest Online training Company you can ever come upon solely focused and dedicated to your career development. We have partnered with several well-known companies and prestigious institutions and individuals to train the next generations in IT technologies. Our aim objective is to foster the best growth and upgrade your career objectives with proper knowledge and skills. Passionate training of information technology has always been our motto..All desire to achieve their dream jobs and position but a few succeed to reach their goal. Our vision is to help you to achieve your aim. https://www.igmguru.com/
EDA software engineer working on silicon CAD for Intel during the day. I've got DNA synthesis on the brain, and have been learning how to integrate micro/nano fluidics with active electronics to achieve a wholly automated "genetic compiler". Building a nano fab in my home workshop.
I am enthuastic engineer who has been doing software engineering (Linux kernel), electronics, and now chip designs. My day job is leading teams (senior director) focusing on virtualization and security.
ASIC architect and designer. Specialize in deep learning, video, image and signal processing, and compression. Professor of Electrical and Computer Engineering at The College of New Jersey.
Research Scholar | Analog Circuits | EMI Immune Amplifiers | Neuromorphic Circuits
Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group
I'm a physics major studying at UC Berkeley interested in accelerating research and computational workloads with modern VLSI and FPGA tech.
Aspiring IC Design Engineer
Assistant Professor (IISc) | Ph.D. & S.M. (MIT) | B.Tech. (IIT-KGP)
I'm an engineer with both software and hardware background. I'm building next generation distributed storage system.
A student of Electrical Engineering excited about ASIC design. My interests include Co-Processors and Computer Architecture.
PhD Student Research on Integrated Sensor Interfacing Systems featuring signal conditioning and A/D conversion. Functional blocks developed: VGA, current-steering DAC, SAR ADC, AA Filters, SPI master/slave.
I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/
Still an entry-level electronic engineer. Absorbing and practising information and knowledge. Just for curiosity and fun.
I am interested in the platform-based complete SoC design/verification automation methodology and framework
I am a PhD student at Universiti Kebagsaan Malaysia. My research interests include application-specific hardware design, mainly to accelerate machine learning applications.
Electrical engineer with PhD in micro-electronics, and more than 23 years experience in the automotive industry. Specialized in the development of CAD tools to support mixed-signal and smart-power IC design. Founder of SYDELITY b.v. a start-up company offering services and products accellerating system-level simulations.
MSc. Student in Physics at University of Turin
More than 14 years of experience in Electronic Design Automation roles with leading industry companies like Intel, Samsung and others. Have a strong background in EDA best practices and technologies like DRC, LVS, XRC, PERC and others. Have a mixed background in circuit. design, data science and programming with emphasis on data analysis for microchip design. Have strong background leading project deliveries to fortune 100 companies in the world. B.Sc. in Electrical Engineering from faculty of Engineering, Ain Shams University, Cairo, Egypt.
current Phd Student in UCSC Hardware System Collective group formerly worked in Qualcomm Wireless R&D team as a design verification engineer
Professor of CSE at UC Santa Cruz
Roman Gauchi received the M.Sc. in Electrical Engineering from Polytech Grenoble, France in 2017 and the Ph.D. in Electrical Engineering from CEA-LIST, Grenoble, and University of Grenoble Alpes, France in 2021. Dr. Gauchi is a Postdoctoral Research Associate at the University of Utah, since March 2021. His main research interests are emerging technologies and reconfigurable architectures, digital integrated circuit design and embedded software.
MS Research Scholar at Indian Institute of Technology, Tirupati
Principal engineer leading PNT product development at GE Aerospace
Analog/Mixed signal designer.
student
MS ECE (Nanoscale devices and systems) at UCSD
I am an Associate Professor teaching VLSI design, hardware security, and digital circuit design at Drexel University. My research interests include analysis, modeling, and design methodologies for high performance digital and mixed-signal integrated circuits, power management for SoC and microprocessor circuits, hardware security, including digital and analog obfuscation and Trojan detection, and electric and thermal modeling and characterization, signal and power integrity, and power and clock delivery for heterogeneous 2-D and 3-D circuits.
A researcher and VLSI guy
Kashif Inayat currently working as a doctorate fellow researcher at System-on-Chips (SoC) Laboratory, Electronics Engineering Department of Incheon National University, South Korea. He considers himself fortunate to have the opportunity to work under Prof. Jaeyong Chung at Incheon National University. Prior to starting his Ph.D., he completed his Master of Science in Electronics and Computer Engineering (ECE) from graduate school, Hongik University in 2019 under the supervision of Prof. Seong Oun Hwang. Moreover, during MS studies he worked at Information Security and Machine Learning Lab, Hongik University, South Korea as a graduate researcher for 2.5 years. Furthermore, he chaired the special sessions at International Conference on Green and Human Information Technology (ICGHIT 2019), held in Kuala Lumpur, Malaysia (Jan, 16-18, 2019). Moreover, he is a registered member of the Pakistan Engineering Council and a reviewer for the IEEE Access Journal.
Passionate student of electronics and computer engineering
Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.
Digital design engineer Msc Student at cairo university Faculty of Engineering
Doctoral student at the Tokyo Institute of Technology.
Planning to enter a master's degree program in 2023. Currently employed in consumer product manufacturing. Personal project experience in embedded systems, digital verification, and RTL for FPGAs.
I am passionate about all areas of VLSI Design and trying my level best to be an expert in the entire flow, analog, digital and mixed signal. Beyond chips, I like poetry, skating, skydiving, late night swimming and trekking in no particular order.
Driven by my zeal for innovation and technology, I am a passionate VLSI Design Engineer and an open-source enthusiast emphasizing freedom to chip design. Eager to tackle unsolved problems, I strive to make a large imprint on innovation one step at a time.
Analog mixed signal IC design professional with 22 years of experience
Experienced SW developer (C/C++/C#) and digital HW designer (SoC/FPGA)
I’m a research student at Odisha University of Technology and Research working for better understanding of Low Power Electronics Circuit . My research and career interests lie in the Application specific Integrated circuits and Analog Mixed Signal with expertise in circuit design and programming. With a board skill set covering the important facts in the semiconductor industries, I am looking for exciting opportunities in the same. I enjoy generating new ideas and devising feasible solutions to broadly relevant problems. My colleagues would describe me as a driven, resourceful individual who maintains a positive, proactive attitude when faced with adversity. Currently, I’m seeking opportunities that will allow me to develop and promote technologies that benefit human society.
LAB ON CHIP FOR NEURONs STUDY
Currently working as a Graduate Instructor in the department of Electrical and Computer Engineering and pursuing my Ph.D. in Electrical Engineering at the University of Missouri-Columbia. My research focuses on the development and design of low power decision-making Integrated Circuit (IC) using different type of Ai/Machine-Learning techniques. Besides researching on developing future technology, I'm also a professionally trained Vocalist in traditional South-Asian music majoring in Tagore and have experience in freelancing of 5 years in Digital Art and Graphics.
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.
Developer of open source reliability verification system CVC(RV). https://github.com/d-m-bailey/cvc
I am an Electrical Engineering working VLSI design farm with 7 tape-out experiences.
Iam an Under-graduate currently pursuing B.Tech 3rd year in Electronics and Communication Engineering at Rajiv Gandhi University of Knowledge and Technologies, campus in Nuzvid, Andhra Pradesh 521201
PhD student working on a superconducting FPGA design aiming to work on neuromorphic computing in the future.
Ph.D Student studying analog/mixed-signal VLSI at Brigham Young University
My name is "YERRA BHASKARA VARA PRASAD" pursuing B.tech ECE 3rd year in Rajiv Gandhi University of Technologies, Nuzvid, Andhra Pradesh 521201.
Program manager with more than 25 years experience in the semiconductor industry. Expertise in EDA tools, analogue, RF and high-voltage PDK development, sensor design, design support for electro-magnetic compatibility, ESD and functional safety.
I'm Harsha,I'm pursuing my undergraduate in the domain of Electronics and Communication Engineering from SRM University AP.
Beginner Digital Designer
Undergrad at Harvey Mudd College interested in Computer Science, Computer Engineering, Electrical Engineering and Filmmaking. GitHub: http://github.com/kavidey Youtube: http://youtube.com/@kavidey
I'm a final year student of Electronics and communication Engineering studying at PES University, Bangalore, India.
30+ years in IC design, completed several NOR/NAND flash projects, and running in production.
I would like to think I am a safety-focused, results-driven, and professional Electronics & Communication Engineer and M Tech in Electronics & Communication Engineering with specialization in VLSI Design, who can be relied upon to carry out my tasks competently within strict rules and procedures in a fast and efficient manner.
I'm a UG Student, currently pursuing B.Tech in Electronics and Communication Engineering (ECE).
ECE Undergraduate Student @ Guru Gobind Singh Indraprastha University
Hardware Systems Architect at AroLeap
I work with embedded systems, analog electronics and general physics research. I founded a small engineering services company in Brazil, currently working with a team of 3 engineers to create products and help companies on their way to to production.
I'm a software engineer (operating systems architect), and a microelectronics engineer (IC designer)
为生化环材立心，为机械土木立命，为地海农油继绝学，为集成电路开太平。 | Current undergraduate student in Electronic Engineering, CUHK (2018-2022) | Prospective Ph.D. student in Electronic Engineering, CUHK (2022-2026) | Research Interests: Mixed-signal integrated circuit design for data conversion
Previously Applications Engineer at Triad Semiconductor. Worked on ASICs in the Consumer, Medical and Automotive space. Hardware design background. Proficent in Firmware and FPGA. Passion for applications engineering and semiconductor product definition.
High Performance, High Frequency Analog, Microwave, RF and Optical Chip and Package Test Software and Hardware, Multi-Chip System Integration and Reliability
Passionate about Digital VLSI and Hardware Accelerators. Experienced in using open-sourced tools for design and verification
Experienced Senior Design Engineer with a demonstrated history of working in the electrical and electronic manufacturing industry. Skilled in DAC, SPICE, ADCs, Electronics Hardware Design, and Management. Strong engineering professional with a M-Tech focused in VLSI System Designs from Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering &Technology and also a B-Tech Degree in the field of Electrical, Electronics and Communications Engineering from Mahatma Gandhi Institute of Technology.
I'm currently working as an Optics Design Engineer for Biotech applications. My main interests are (Micro/Opto)Electronics, Optics and Photonics, Data Science and Embedded Systems.
Electronic Engineer from the Federal University of Santa Catarina (Brazil). Master in Electrical Engineering from UFSC (thesis title: CMOS Ultra-Low-Voltage Ring Oscillators). Interested in the areas of Sensors, Ultra-Low Power Circuits and MOS modeling.
Hey! My name is Beyza and I'm an Electrical & Electronical Engineering student in Turkey. My aim is to bring together the knowledge I've gained about science and technology with other people. The more we learn and the more we develop, the better a mark we leave in the world of science. I'm constantly improving myself for a better future, and I am trying to gain as much information as possible.
I am a Senior Undergraduate in Electrical Engineering Department at IIT Gandhinagar, India. VLSI Design and the ability to tweak at the hardware level interest me a lot!
Cryptography and security researcher at Seagate Technology
Final year electronics engineering student interested in exploring VLSI
VLSI Professional with 2.3 years of experience and adequate knowledge in RTL Design, UPF, SDC, Lint, CDC, Synthesis, Physical Design, STA and Scripting. I love Computers and I am interested in RISC V
I am a graduate student at University of Texas at Austin
abyssal witch | deranged catgirl hardware/software engineer + vtuber | that crazy SCSI girl | she/her
I am a Graduate student pursuing my master's in Computer Engineering. I am interested in VLSI projects.
M.Tech. in VLSI DESIGN
RF/Analog IC design and SOC
ASIC and FPGA design and verification Engineer with a sideline in bring devops to Hardware projects
I am a visual artist . Iam working on digitizing my art and seeking different platforms to accept jobs as a graphic designer.
Assistant Professor. ECE. University of Pittsburgh. Interests: Neuromorphic and Biomedical Systems Design
Student of Engineering in automation. Graduate in science of Engineering.
Open-source software developer with 30 years experience in back-end verification.
I am extremely dedicated individual looking for an opportunity to learn and explore new ways to implement the latest technology. My dream is to join a core company and work on on-site projects. I believe my skills and hunger to learn will turn me into an important asset to the company. Thank you
I am a student in my final year of B.tech in electronics. I am eager to learn about vlsi and its technology. I want to take part in openMPW program
William Oswald received the B.S. degree in computer engineering and the M.S. degree in electrical engineering from the University of South Alabama, in 2020 and 2021, respectively. He is currently pursuing the Ph.D. degree in systems engineering. He has worked in industry as a Systems Analyst at Packaging Corporation of America, from 2019 to 2020. His research interests include computer architecture design, machine learning, and model based systems engineering.
Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.
Just another big dreaming engineer with a desire to learn silicon microfab
13+yr ASIC Digital Designer. Master degree on Microeletronic Sensors. Worked on NXP through different projects on automotive and consumer/general market MCUs on areas from SoC Integration to Timing Sign-Off
Digital System Designer.
Creation, Paasion, Action are my three main characteristics. I am a Project Manager with Communication Engineering backgound in ICT field. Focus on the topic of IC design, OS design, Cloud computing and Quantum computing.
I am the founder of Aurifex Labs LLC. I have a degree in EE and have a strong interest in computer architecture, but have been a software developer/entrepreneur professionally. I also have a little audio DSP background. I created Prospero.Live, a collaborative software development platform.
I am the founder of Aurifex Labs LLC. I have a BSEE from Wilkes University. I've spent most of my time in software, education, and entrepreneurship, but have spent the past year learning VLSI and am excited for this new era of open source hardware/tools.
Senior software engineer in Tron Future Tech. My work is related to CPU/FPGA heterogeneous computing for radar signal processing. Capable of designing RTL IP, implementing Linux kernel driver and system software programming.
An electronics and communication engineering student with a great passion for RF and analog design.
Computer Engineering Student and hardware design enthusiast. Enjoys programming and soldering.
Analog Mixed Signal Design Engineer
I am a student at IIIT Bangalore pursuing Integrated Mtech in Electronica and Communications Engineering and am fascinated about silicon wafers and want to pursue a career and build a revolution in this domain.
Trust Connector, Blockchain Architect
Analog design engineer with 3+ years of experience in the analog/ mixed signal design, verification and lab validation.
I am interested in Robotics and Bioengineering. A holistic approach can lead to developing optimal systems. The co-design of cyber-physical systems must take into account the biological and mechanical models, hardware, and software. I search for the application of mathematical representation of models by algebraic geometry, topology, and energy fields. The study of mathematical concepts can lead to hardware and software design that solve complex dynamical systems.
Electronics Engineer. Design Embedded Systems , Firmware professionally and fiddle with others :)
I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.
I am hager mohamad diff allh, from faculty of engineering-MINIA university (Electrical engineering department).
I am an Electronics Engineer now continuing my MS in electronics from COMSATS Abbottabad in Analogue Chip Design.
Final year student of Electrical Engineering at UET Lahore. Area of expertise is Digital Design, Computer Architecture and SOCs.
ASIC Verification Engineer with 12+ yrs of exp.
IC design Engineer
Looking for an internship opportunity in VLSI or the semiconductor industry. Hey, Welcome to my page I'm Rishabh Verma, a pre-final ECE undergrad, who has a keen interest in the VLSI domain. I love to design and simulate circuits. Till now I have participated in two circuit design hackathons. One of them was "Mixed-signal Circuit Design and Simulation Marathon Using eSim" organized by FOSSEE Team IIT Bombay, in which my design was ranked under the "Outstanding" category with a cash prize of INR 10,000. I have hands-on experience with the simulation tools like Synopsys Custom Compiler, eSim, Vivado, Pspice, and LTspice. I have also done layout designing and parasitic extraction of some basic logic functions using the ELECTRIC VLSI system design tool. Done DRC and LVS. I'm also familiar with the FPGA flow. In my 3rd year, I have done the implementation of a Robotic Arm controller using the FPGA. Verilog HDL was used to code the algorithm. Currently, I'm working on the " AQI estimation " using Image processing on FPGA. You can check my projects on my Github, the link is provided in my resume or in the website section of my profile. Feel free! to reach out to me if you are doing some cool stuff on FPGA or something related to VLSI and Circuit design.
I am an Electronics Engineering student interested in IC design.
Harvard Class of 2024; First place worldwide in 2019 Purple Comet math contest
Electrical Engineering student at UFMG, scheduled to graduate in Dec/2022. Experience in the automotive sector by the Formula Tesla UFMG team, designing electrical and electronic systems. Exchange experience in South Africa for 3 months studying English and working voluntarily in needy settlements. Currently, work as Software Engineer at Cadence Design Systems.
Hon-Piu Lam, is a Ph.D. candidate in the Department of Electronic and Computer Engineering of the Hong Kong University of Science and Technology (HKUST). He was an analog IC designer engineer in Valence Semiconductor from 2004 to 2007. From 2007 to 2015, he joined Fujitsu Semiconductor focusing on the embedded NOR flash design. He has been a researcher in HKUST focusing on the integrated power electronic and data converter. His research interests include readout electronics, integrated power electronics and radiation hardened electronics for experimental physics.
I am a student at Anna University, Chennai, India. I am interested in Neuromorphics.
I am a student who is currently taking a deep dive into the world of ASICs.
I am student.I interested in semiconductor fabrication technics
Senior Faculty Specialist at University of Maryland
I summarize myself as an extremely committed, utterly honest, very responsible, quite smart and very hard working person at my work while very caring, empathetic, sensitive and sensible person personally. curious by birth , gets very easily bored with routines and set patterns. always in search of making changes, productive changes in and around myself. Believes strongly in getting the basics right in every work/project done or to be done. An unbiased person believing strongly in equality, freedom & sovereignty of one self and of others.
I am a synthetic biologist and software engineer interested in chip design.
Professor of physics at the University of Texas at Arlington
9th semester Electronic Engineering student with knowledge in Simulink, C++, Orcad, LTspice XVII and Verilog. As an electronic engineer in training I have developed a strong interest about the design of analog circuits as well as the operation and manufacture of logic and graphics processors, in the same way I am interested in the use of solar energy and the efficiency in new technologies.
Undergraduate Electrical and Computer engineer at Aristotle University of Thessaloniki, in the Electronics and Computing Field.
A graduating IC design student with lots of passion and interest for electronics design!
As a 9th semester student of Electronic Engineering at Universidad Industrial de Santander, I have developed a strong interests for design of analog circuits, optimization in the construction of transistors and chips manufacturing as well as the aspects that go into it. I posses knowledge of MATLAB (Simulink and Simscape), ORCAD, LTspice XVII, C++ and Verilog.
I am a PhD student at the Indian Institute of Science Bangalore. I do research in the area of RF and mixed-signal circuit design.
I am a professor in the department of electrical and computer engineering at University of Cincinnati. My areas of expertise are: CMOS, Beyond-CMOS devices such as RRAM, FeFETs, gated-RRAM, TFTs, novel device design, fabrication, and testing, neuromorphic computing, and hardware security.
I am a senior at California State University, Fullerton, graduating in May 2022. Also, I am very interested in creating and implementing designs for either hardware or software. Primarily, I am interested in working on creating and fabricating devices for any use. I am also willing to develop and extend my current knowledge on all subject matters I have learned during my undergraduate time at CSUF.
I am a Masters fellow student of RFCS2 Lab in IC Designing.
I am a PhD student in Electrical and Computer Engineering at the University of California, Irvine.
Automation enthusiast (likes to code in Perl). At this time, Doing Master's in VLSI Design and working as an intern @intel. Great learning experience doing both simultaneously. Have experience designing in both circuit (Low power & timing) & device level (high performance designs for digital applications). Obtained honor of 3rd position in concept design competition by ISRO for designing temperature & radiation resistant Tunnel FET. Would love to work with all device technology enthusiasts as opportunities arise.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
Post-doctoral research fellow in the discipline of Software and Systems, School of Computer Science and Statistics, Trinity College Dublin, with a keen interest in learning new things, specially related to computer science and engineering. Around 4 years experience of teaching and research and more than 10 years of experience in architecture design, optimization, analysis, implementation and verification of digital and digital signal processing systems on FPGAs and ASICs. Diversifying research career by working on quantization of deep convolution neural networks. Author of three peer reviewed journal publications and five international conference publications.
I am a Graduate Research Assistant at the University of Tennessee Knoxville, pursuing the PhD degree in Mixed-Signal Analog Circuit design.
Undergraduate Electrical and Computer engineer at Aristotle University of Thessaloniki, in the Electronics and Computing Field.
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Mixed-signal designer
Hi, I'm a student at UACJ and I like integrated circuit designs.
I'm a new grad Digital Design engineer working. Looking forward to contribute to open source silicon projects.
Research Scholar at Department of Electrical Engineering, Indian Institute of Technology Ropar, India. Current research area is EMI Immune Amplifiers. Previous works include a Memristive adaptable ramp generator circuit for a on-chip training signal generator for trainable DAC, Modeling and hardware implementation of digital image watermarking algorithms.
Independent Digital Design and Verification Expert with more than 20+ years of experience and founder of semify. While working for established semiconductor companies like Infineon, Dialog Semiconductor and NXP I was responsible for bringing ideas into working ASICs. I developed USound’s first ASIC from FPGA based prototyping to tapeout with minimal resourcing, demanding timeline and tight area and power consumption constraints. Currently I'm acting as a consultant for easyIC and Cypress / Infineon. In addition I'm is also lecturer at the FH Joanneum Graz and guest lecturer at the Technical University Graz.
Provides mixed-signal CMOS training to academia using open-source tools and also solution for the consumer and automotive industry.
Over 25+ years of experience Silicon Engineer with focus on taking a Silicon from GDS2 to PRQ. Involved in Wafersort testing, Packaging, Packaging Testing, Silicon Characterisation - Electrical & Functional, Package Qualification, Reliablity testing and Yield management
hello, my name is Darshan Guled, i am an engineering student and i am working on PICO RISc processor and RAVEN chip,
I am collage student that wants to improve himself in that area. https://www.linkedin.com/in/alierennozdemir/
Silicon Entrepreneur with extensive experience in Digital Physical Design, EDA and HPC Infrastructures for Electronic Design.
U.G. Student at IIT Gandhinagar.
A digital design engineer, interested in memory hierarchies and high speed interfaces.
Electronic engineering student. 24 years old. Currently doing a LNA design as thesis.
Hello I am Rakesh , I am pursuing my Under Graduation in Electronics and Communication Engineering at KLE Technological University, Hubballi. I am looking ahead work in Digital VLSI Domain. :D
Right now, I am working on physical design of ASIC.
I am Abhishek Pamadi , studying engineering in KLE Technological University, I have keen interest in VLSI domain
Still a Bachelor student..Trying to get know more always!!
Hello I'm sultan, and I'm from KLE technological University hubli and I'm very exited to do this course on picorisc.
I’m an engineer always looking to learn, optimize and automate. I work on data analytics to provide deep insights into hardware designs, particularly physical design flow. Exploring areas to facilitate design engineers in taking data driven decisions for faster design turnaround times. I like to think about life. I like experimenting with different techniques (using software tools and meditation) to optimize my day and work effectively. In my free time, I’m learning Web Programming to build my own blog. I know there are templates and websites but where’s the fun and learning if you don’t do it from scratch? I like mentoring students on how to approach career and life in general.
electronic engineer with knowledge in AMS design
Student at Poolesville High School interested in computer science and engineering
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
An engineer looking forward to making a career in digital vlsi design
President and CEO
current I am doing postgraduation in a Micro and Nanoelectronics
I am a final year Masters student of NIT Rourkela, I am interested in SoC designing using RISCV ISA
I am designed mixed signal ICs for Music, Audio, IoT and sensor applications.
i'm an eletronic engineer there are studing to became an IP desing
Graduate equipped with a Bachelor of Engineering in Electronics and communication with a concentration in Semiconductor and VLSI design with hands-on experience in CAD tools and to join a reputable organization to begin a fulfilling, lifelong career.
An analog mixed-signal circuit designer for low-power precision sensor interfaces. See https://staff.aist.go.jp/ippei.akita/
Lecturer at the Department of Computer Engineering, Kwame Nkrumah University of Science and Technology, KNUST. My primary interest is in analog and mixed-signal design.
Dad. Partner. Scientist. Activist. Maker. — He/His
Software engineer who's increasingly interested in hardware and ISAs.
Artificial Intelligence/Machine Learning • Big Data • Internet of Things • Product Development
R&D Engineer, interest in synthesis and verification software for electronics and photonics hardware
Ph.D. in electrical engineering, 25 years experience in mixed-signal IC design
I am a High School Student, Entry Electrical Engineer, and Computer Scientist I love to tinker with stuff and to innovate new ideas.
Electrical engineer with interests in ASIC design, biomedical imaging, and scientific instrumentation.
An enthusiast of the Open Source World.
Lecturer, Department of Electrical Engineering Institut Teknologi Sepuluh Nopember INDONESIA
I am currently a second year PhD. student working in the field of Electrical Engineering at the University of Virginia. My research interests include Analog/Mixed Signal circuit design, Asynchronous computing hardware design, stochastic computing and Ultra-Wide Band transmission circuits
I'm a PhD student working to make mixed-signal chip design more accessible, drawing inspiration from software development techniques. Prior to starting the PhD program, I spent a number of years working in industry at both the chip- and PCB-level on optical sensors and power systems.
Dr Tapas Kumar Maiti, a former associate professor at Hiroshima University Japan, moved to DA-IICT India where he is a faculty member, since June 2019. He was a visiting faculty to IIEST-Shibpur. He has amazing research experience at McMaster University, Canada and IIT-Kharagpur. He has published more than 100 papers in reputed journals and conferences, and also co-authored a book. He received ICMM Excellent Presentation Award, IAAM Scientist Medal, and University Gold Medal. He is a member of IEEE, and Life Member of IEI. Currently, he is working in the areas of Intelligent Computing Devices, Robotics, and Cybernetics.
Hobbiest and Dabbler in all things Electronics
I am currently working as a Research Associate. We are doing research and development on RISC-V Technology.
Mixed-Signal Integrated Circuits instructor and researcher.
My name is Joel Sanchez Moreno I graduated as a Computer engineer and I currently work as a full time RTL design engineer for a start up. In addition, I am doing a part-time master on High Performance Computing on the Universitat Politècnica de Catalunya (UPC)
Hi, I'm an Electrical & Computer Engineering + Computer Science student at Oregon State University.
PhD Student @ UC Berkeley, formerly SWE @ Google
Working on a PhD in electronics and nanofabrication at the University of Glasgow. Interested in designing CPUs and SoCs with RISC-V.
I am a final year B.Tech undergrad from India highly passionate about digital system design.
I started my passion a year ago, I was supposed to do my radio-ham license but it has been postponed. So in the meantime instead of just waiting I started to learn about signal processing. I bought an SDR, built my antenna a (double cross), then I bought a yagi 70cm - 2m. I also designed my upconverter to be able to get a bunch of different ranges that my SDR would not catch. I'm now building a cubesat Simulator. Using a raspberry pi and an STM32.
Electrical Engineer, pursuing a Masters in Microelectronics
A bit of everything - mostly focused on networking system level designs / FPGA / Switch Fabric from concept to validation - and now automotive
Driven by my fascination for innovation and technology, the vast field of science has been my home for a quite a time now. Having my schooling done at Lisieux school and my bachelors going on in PSG College of Technology, I have always firmly believed in education beyond classrooms. And the company I founded, Technowiz, was solely for offering innovative and practical courses to the young minds of schools around here. Technowiz offers advanced wholesome courses in the promising field of robotics, electronics and beyond. I have been also actively involving myself in many projects related to my major - Electronics and Communication Engineering of which Cost Effective IoT enabled automation of Spray Pyrolizer, a project at Thin Film Center of Excellence, PSG College of Technology funded by PSG STEP a notable one. I am deeply interested in working in cutting edge areas of engineering to solve problems with the vision of making the world a better place to live. The future is science. The future is now! Check out: https://shrihari.ga https://technowiz.tk
DR. PETER BERMEL is an associate professor of Electrical and Computer Engineering at Purdue University. He is the PI for the SCALE project, which aims to perform workforce development in microelectronics. His research focuses on improving the performance of photovoltaic, thermophotovoltaic, and microelectronic systems using the principles of nanophotonics. Key enabling techniques for his work include electromagnetic and electronic theory, modeling, simulation, fabrication, and characterization.
Full time: Electronics Engineer with an interest in embedded systems solutions. I can take a project goal and design, develop, prototype, program, validate an embedded system reaching that goal. Part-time: Maker, interested in rapid prototyping, my lab has basic machines: CO2 Laser cutter, 3d printers, small milling machine. I've built 3 of my own 3d printers.
Osaze Shears is passionate about many engineering and computational concepts. These include embedded systems, application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and microprocessor technologies. Osaze spends his free time tutoring other students who are interested in learning to become better computer scientists and engineers to benefit the greater society. Osaze is currently a PhD student at Virginia Tech conducting research under the Multifunctional Integrated Circuits and Systems (MICS) lab. His research interests include: • Spiking Neural Networks • Hardware Acceleration • SoC Design with ASICs and FPGAs • Deep Learning • Edge Computing
Enthusiastic VLSI Design Engineer currently working in Domain Specific Architectures
ASIC design engineer at Google advancing high-level synthesis and next-generation computer architectures.
I am a young student, growing high with a passion for VLSI. I am highly interested in working on high-speed low-power RTL chip design.
Semiconductor technologist with deep expertise in device fabrication and mixed signal circuit design for high-performance compute applications.
I am a fresher interested in VLSI design. I have completed my Masters in VLSI Systems Design in the year 2020.
I am currently a postgraduate student at the University of Calcutta and graduate with a Bachelor of Science Degree in Electronics, which will broaden my aptitude in numerous aspects. The curriculum is designed for proficiency in problem-solving techniques, organizational skills, and other mechanics that will help me to execute solutions. Which gives me the opportunity to explore in-depth learning experiences in various technology. I am interested in astrophysics, radio astronomy, solar physics, and other space and atmospheric research, also in semiconductor physics and VlSI technology.
I'm currently a PhD candidate at Stanford studying Electrical Engineering with Prof. Priyanka Raina. I graduated from Princeton with high honors in Electrical Engineering and certificates in Applications of Computing and Engineering Physics. I completed my Stanford M.S. degree in EE; my current PhD research focuses on emerging memory/circuit technologies (resistive RAM/NEM relays) and efficient reconfigurable computing (FPGAs/CGRAs). I consider myself an eclectic learner who has never been satisfied to work in just a single area. In the past, I've done research projects across an extremely wide array of subjects, including oxide nanoelectronics (Prof. Patrick Irvin, Pitt), stochastic simulation of biochemical processes (Prof. Marcus Dittrich, PSC), deep learning applied to petroleum well data (Prof. Verena Kaynig-Fittkau, Harvard/QRI), and development of quantum cascade devices in group-IV materials (Prof. Claire Gmachl, Princeton). My senior thesis at Princeton with Prof. Prateek Mittal was focused on privacy threats posed by Content Delivery Networks. I've also worked as a software intern at two companies, GoFundMe and Amazon; there, I took on data science and analytics problems affecting business. Recently, I completed an (entirely virtual!) internship at NVIDIA focused on improving circuit design with AI. Additionally, I have several personal projects I'm proud of: an analytics engine for online Set! to understand how people learn the card game, enabling Amazon Alexa home assistants to rap battle each other, studying graph techniques for understanding musical collaborations... and so on. I love meeting/hearing ideas from new people, so feel free to contact me. Cheers!
I've done everything from silicon design at the "bottom of the stack" to System Architecture and Design (with plenty of SW to go with it; at every level)
I'm the CEO of a fabless semiconductor start-up company and have more than 15 years experience in designing mixed-signal ASICs on various foundry processes.
Engineer / VP
I am currently a Sr. Hardware Engineer at Tesla working on Autopilot applications
Hi I'm a MASc Student at University of Toronto. My research focuses are FPGA architecture, DL Acceleration, Heterogenous devices and CAD tools.
Hardware System Designer from ASIC chip to board to SOC platform
Master's student at Newcastle University, UK. Semiconductor enthusiast.
I am a hobby programmer and electrical engineering student. I love to learn and to create new things. Creating a chip is just another step along a long (and hopefully fun) path of learning.
Known since I was 12 years old that I wanted to be an electrical engineer, by the time I was like 14 or 16 years I knew that I specifically wanted to design microprocessors. I officially became an electrical engineer by graduating with a B.S.E.E. along with a minor in Business from N.C. State University. With more than 30 years of industry experience, I look forward to bringing some of my own original ideas and visions into reality and I am very much tapped in the entrepreneurial spirit while also be an advocate for Open Source projects, both Software and hardware based, along with being a super advocate for the Agile movement for all engineering disciplines, i.e. beyond it just being a thing software folks do!
Professor Alex James received the Ph.D. degree from the Queensland Micro and Nanotechnology Centre, Griffith University, Brisbane, QLD, Australia. He works as a Professor of AI hardware at School of Electronic Systems and Automation, and Dean (Academic) at Digital University Kerala. He works in the broad area of brain-inspired systems, memristive systems, intelligent semiconductor devices, analog circuits and imaging systems. He is Prof-in-charge of Maker Village that supports over 80+ hardware startups. He is Chief Investigator of the centre for Intelligent IoT Sensors, and India Innovation Centre for Graphene, developing new products to the market. Dr. James was the founding chair for IEEE Kerala Section Circuits and Systems Society. He is a member of IEEE CASS Technical committee on Nonlinear Circuits and Systems, IEEE CASS Technical committee on Cellular Nanoscale Networks and Memristor Array Computing, IEEE Consumer Technology Society Technical Committee on Quantum in Consumer Technology (QCT), Technical Committee on Machine learning, Deep learning and AI in CE (MDA) , Member of BCS’ Fellows Technical Advisory Group (F-TAG) and Member of SIG on Electronics for Agrifood.
Undergraduate student at Gebze Technical University, Turkiye. Works on custom instructions on Risc-v cores and Risc-v arthitechture.
EE PCB, Systems, Mechnical, Cooling, Power Used to sling a lot of gates (polygons) in esoteric processes (Gallium Arsenide, JJ)
I am studying artificial intelligence as my Bachelors at the Institute of Technology Deggendorf. For my further studies I want to specialise in low level chip control and hardware accelerated devices cut out for edge AI devices.
I'm a Graduate Research and Teaching Assistant at Oregon State University.
Cal Poly CARP is a computer architecture research group of professors and students at Cal Poly, San Luis Obispo, that has the goal of developing a framework for building SoCs. The advising professor is Joseph Callenes-Sloan.
Principal Scientist at Octave Photonics
Analog Mixed-Signal Engineer at InertialWave. Developing next gen electronics for resonator control and sensing.
I am Associate Professor in Department of Electrical Engineering at IIT Bombay, India. My interests are embedded non-volatile memory based systems for edge AI
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
Professional frontend developer with a passion for AI and neural networks. Committed to merging cutting-edge technologies with user-centric design to create intuitive and intelligent web experiences. Seeking opportunities to contribute my expertise in AI to drive innovation and enhance user engagement.
I am developing myself in the field of artificial intelligence and microchip. value added
Jack of all trades
My name is Syed Muhammad Saad Ahmed Shah, and I am an ambitious student pursuing a degree in Electrical Engineering at NUST (National University of Sciences and Technology), specializing in chip designing and digital system design. I am writing to express my sincere interest in contributing my skills and passion for chip designing to your esteemed company. Academic Background: During my academic journey, I have excelled in various courses that form the foundation of integrated circuit design. My coursework includes advanced topics in digital logic design, microelectronics, VLSI, and FPGA programming. I have gained hands-on experience in Verilog programming and have successfully implemented FPGA-based projects, including dynamic positioning of wind power platforms and ball and beam control systems. Passion for Chip Designing: My interest in chip designing stems from its potential to revolutionize technology and create innovative solutions that positively impact society. The idea of crafting complex electronic systems from scratch and optimizing their performance intrigues me. I am eager to explore the world of ASIC and FPGA design, as I believe it aligns perfectly with my passion for creating cutting-edge semiconductor devices. Skills and Attributes: Apart from my technical skills, I possess strong analytical and problem-solving abilities. My adaptability and eagerness to learn allow me to tackle new challenges with determination. I value teamwork and collaboration, and I thrive in environments where ideas are shared and cultivated collectively. Future Goals: As I move forward in my academic journey, my goal is to be at the forefront of chip designing and contribute to the development of advanced technologies. I see myself as a part of a dynamic team, working on groundbreaking projects that shape the future of the semiconductor industry.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
An aspiring young electrical engineering student from Pakistan trying to learn and build my expertise in the FPGA/SoC development world with Xilinx Zynq platforms. Working on a machine learning accelerator on Digilent Cora Z7 (Zynq 7000 series SoC) board for my senior year project.
Hi , I am Gajanan Chavan I am a passionate individual with a deep love for computers. My skills encompass C++, HTML, CSS, Bootstrap, Python programming, and data structures. Currently, I am pursuing a degree in Electronics and Telecommunication at SGGSIE&T in Nanded, Maharashtra. My goal is to continuously enhance my knowledge and expertise in the field of computer science and contribute to innovative projects and solutions. I am eager to connect with like-minded professionals and explore opportunities that allow me to apply my skills and contribute to the ever-evolving world of technology.
I am a software developer for Efabless. I live in Austin, Texas. I play guitar, bass, and drums. I love playing and listening to all types of music.
I'm wireless research to make prototype to probe new wireless technology
Leader of a quantum hardware engineering team. Quantum hardware engineer, IBM quantum administrator/ developer, carpenter from the countryside in northern Arizona.
A recent Electronic Engineering graduate
30+ years industry experience in hardware and SOC design, with specialisation in Functional Verification, Silicon Validation, SI/PI and Board design
Electronic engineering student at the National University of Córdoba
Academic leading a research group active in FPGA research and open-source.
I am a science enthusiast. I have knowledge of analog and digital electronics
A designer, a PhD, Who simply love Circuit design
University researcher
FPGA/HW engineer
Product design and development
I'm a student of computer science applied to agronomy and I love science. I'm passionate about how technology can help solve agricultural challenges and improve food production. I enjoy exploring different areas of science to discover new ways to solve problems. I'm motivated to learn new skills and help improve agriculture and food production.
VLSI DOMAIN SKILLS --------------------------- • Digital Electronics • HDL: Verilog • HVL: System Verilog • TB Methodology: UVM • Protocols: APB, UART, I2C, SPI • EDA Tools: Modelsim, Quartus Prime, Questasim. VLSI RTL SKILLS ---------------------- • Digital Skills : Combinational and Sequential circuits • FSM • Memories • Verilog : Data types • Operators • BA and NBA • Delays in Verilog • Begin-end and fork-join Blocks • System tasks and Function • Compiler directive • FSM Coding. VLSI VERIFICATION SKILLS ------------------------------------ • System Verilog HVL: Data Types • Memories • Interface • OOPS • Constraint Randomization • Threads • Functional coverage • CRCDV • SV Testbench (Hands on SV Testbench) • Universal Verification Methodology: UVM Objects and Components • UVM Factory • UVM Phases • UVM Configuration • TLM • Virtual Sequence and Sequencer • UVM Testbench (Hands on UVM Testbench).
Dedicated, innovative and enthusiastic individual with consolidated expertise in Digital Electronics, Data Sciences, Robotics and IoT. A confident leader who effectively collaborates with the team members to accomplish all goals in an accurate and timely manner.
I am ASIC digital designer engineer, always keen to explore new alternatives, methodologies, designs. I like challenges and always proactive to help.
I am an undergraduate student majoring in Electronics and Communication Engineering, with a strong passion for Digital Design. I am incredibly enthusiastic about working in this field, as it forms the foundation of every electronic device we use today. Moreover, its development plays a pivotal role in enabling the practical application of Machine Learning algorithms. I possess a diverse skill set that includes proficiency in Machine Learning and Data Analysis, as well as programming skills in C++ and Java. These skills equip me to contribute effectively to the exciting world of Digital Design and its integration with cutting-edge technologies like Machine Learning.
Microwave/RF Electrical Engineer. Love learning new things.
Research Associate, Department of Engineering, University of Cambridge
Power electronics IC designer with in-depth experience in switched-capacitor and hybrid DC-DC converters.
Computer Engineering Student at the University of Notre Dame
A dedicated Physical Design Engineer aspiring to craft silicon for real-world applications.
I am currently in my junior year studying computer engineering at the University of Notre Dame. Alongside that, I am pursuing a concentration in cybersecurity and a minor in engineering corporate practice. My curiosity was initially drawn to the puzzle-like nature of security problems, which led me to major in Computer Engineering in an effort to dissect both the hardware and software sides of computer systems and expose their vulnerabilities. The more I learned about cybersecurity, the more I realized its criticality in safeguarding individuals and organizations and its ever-growing prominence in our tech-driven world, especially within software development. Throughout my undergraduate career, I have taken on various leadership positions, from acting as the Vice President of my university's Engineers Without Borders chapter to leading development teams at CS For Good. I expect to graduate in May 2025, and I am currently interested in an internship position for the summer of 2024.
CSE Professor at the University of Notre Dame
I am currently in my junior year studying computer engineering at the University of Notre Dame. Alongside that, I am pursuing a concentration in cybersecurity and a minor in engineering corporate practice. My curiosity was initially drawn to the puzzle-like nature of security problems, which led me to major in Computer Engineering in an effort to dissect both the hardware and software sides of computer systems and expose their vulnerabilities. The more I learned about cybersecurity, the more I realized its criticality in safeguarding individuals and organizations and its ever-growing prominence in our tech-driven world, especially within software development. Software engineering complements that passion but adds a layer of creativity and ingenuity that fuels my drive to develop programs and systems that help serve people all over the world. I strive to build solutions that are not only resource-efficient but also sustainable, scalable, and adaptable. Achieving this goal requires a relentless passion for learning about available and emerging technologies – a skill I am proud to have. I am fascinated by the ever-evolving landscape of tech innovation, and it is this fascination that motivates me to delve deeper into the world of technology, continuously seeking out new knowledge and skills to ensure I stay at the forefront of this dynamic industry. Throughout my undergraduate career, I have taken on various leadership positions, from acting as the Vice President of my university's Engineers Without Borders chapter to leading development teams at CS For Good. I expect to graduate in May 2025, and I am currently interested in an internship position for the summer of 2024.
Experienced in software engineering and offensive cybersecurity, I specialize in wireless networking security, cellular communication security, and cryptanalysis. Proficient in C, C++, and Python, I excel in scripting and automation. Currently delving into embedded system design, focusing on FPGA and ASIC.
I am a student at the University of Notre Dame, studying Computer Engineering, Engineering Corporate Practice, and Accounting. I seek to combine my technical background alongside dynamic person-focused relationship building to create impact at the intersection of engineering and business.
As a highly motivated and enthusiastic student, I possess strong programming and analytical skills. My passion lies in the fields of VLSI, machine learning, artificial intelligence, and embedded systems, and I am eager to further develop my knowledge and excel in these areas. With a keen attention to detail and a quick learning ability, I am able to grasp complex concepts swiftly and apply them effectively. My problem-solving skills have been honed through various academic projects, where I have demonstrated the ability to identify and overcome challenges with creativity and efficiency. I am now seeking an opportunity to learn and grow in a professional environment, leveraging my skills to contribute to the success of an organization.
Seasoned VLSI professional with experience in complete chip design flow, domain experience data communication and telecom.
I am a computer science major at the University of Notre Dame.
Professor at the University of the Philippines Diliman.
I am a Computer Engineer at the University of Notre Dame, with minors in Innovation and Entrepreneurship and Corporate Engineering Practices. I enjoy working with assembly languages and at the circuit level.
Computer Engineering Student at the University of Notre Dame
I am electronics engineer with 30years experience. I have very good expertise in IC packaging.
I am into Analog and Mixed Signal designs. I have been involved in creating ASICs for 30 years.
Computer Engineering Major at the University of Notre Dame
Currently a computer engineering student at the University of Notre Dame
Computer Engineer at the University of Notre Dame
Current Junior at the University of Notre Dame studying Computer Engineering
Computer science student at the University of Notre Dame
I am a blockchain developer and data scientist student looking to make my own intelligent farming drones as my long term goal for the future. I want to learn chip design so that my company is able to manufacture the drones from scratch thereby providing a custom service to our clients.
He/Him High School Student Just a regular student who is doing things impulsively (more like out of boredom).
I am a researcher in VLSI domain and Assistant Professor at DIAT India
Fresh Electronics and Computer Engineering graduate from Nile University with magna cum laude distinction. Interested in computer architecture design using AI. Have an experience with digital IC design, data analysis, machine learning, software engineering, and system administration. Currently, working at the NISC research center in Nile University as a part-time research assistant in the field of microarchitecture design.
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
Senior lecturer at Vasyl Stefanyk Precarpatian National University
I am an Engineer and Project Manager in Software and Hardware Space !
I do research in the field of mixed-signal IC design in various areas like biomedical, space research and consumer electronics.
I am a student of nit trichy college pursuing b.tech.i am actually interested in semiconductor sector. That's why I visit efabless.com
holding a Doctorate in Electronics and Telecommunication Engineering, with a robust background in research and innovation. Throughout my academic and professional journey, I have successfully completed four significant research proposals, contributing to over 60 publications in esteemed journals and conferences within the field. My dedication to advancing technology and fostering innovation led to the granting of a patent, underscoring my commitment to pushing the boundaries of knowledge. Additionally, I have secured copyrights for 10 original works, further cementing my contributions to intellectual property. In addition to my research endeavors, I have also ventured into the realm of academia, having published seven books and serving as the editor of Scrivener Wiley, a prestigious platform in the academic community. These publications not only showcase my expertise but also reflect my passion for sharing knowledge and nurturing the next generation of professionals in the field. With a multidisciplinary approach and a drive for excellence, I am poised to continue making significant strides in electronics and telecommunication engineering, leveraging my expertise to address pressing challenges and drive impactful innovation.
I am an engineering student in my 3rd year interested in a VLSI career i am still exploring the field and am currently interested in frontend design
I love to learn and make things. RF, power electronics and AI/ML get me really wondering, what could we do with all of them.
Hao-Yen Tang received his PhD degree from UC Berkeley Advised by Prof. Bernhard E. Boser, his PhD research, PMUT ultrasonic fingerprint sensor, convince InvenSense senior management to make a heavy investment to take this technology to mass market. At InvenSense he’s leading a multi-disciplinary system team for the next generation ultrasonic fingerprint sensor bringup, characterization and calibration, coordinating the works from different field including acoustic, MEMS, CMOS, FW, and SW. Currently, he serves as CTO/Co-Founder in the startup company UltraSense Systems. The company is aiming to transform any surface material into a Touch/Press user interface with it’s proprietary PiezoMEMS-CMOS technology. Dr. Tang is the recipient of 2016 ISSCC Best Paper Award (Lewis Winner Award for Outstanding Paper), 2015 SSCS Pre-Doctoral Award and 2015 ADI Outstanding Student Designer Award. Currently he holds 20+ granted patents, 20+ publications, and 2000+ citations.
We are an undergraduate chip design team at Cornell University dedicated to open-source design!
I am a ASIC Designer with a piqued interest in AI Hardware Design.
Senior security researcher, compiler/binary hacker, NFC ninja, hardware hacker with a FPGA hammer. Previously Pay Security.
I am an alumnus of Masters in Electrical Engineering from Department of Electrical Engineering, University of Engineering and Technology, Lahore; the project should be shipped there. The address is: University of Engineering and Technology, Main Campus, G. T. Road, Lahore, Pakistan. Postal code: 39161
Software developer / electronics enthusiast
Adjunct Professor and Chief Mentor, Advanced VLSI Lab Silicon University, Bhubaneswar, India
I'm a BTech Electronics and Instrumentation graduate and an electronics enthusiast who was inspired by the open-source silicon technology and it's accomplishment and aim to build a career for myself in VLSI specifically as an ASIC Physical Design Engineer.
Physicist - cQED - Josephson Juntion - Nanolithography
Just another PhD drop-out :) Used to work on quantum dots and other fun compound semiconductors
I am a research scholar in the Electronics & Communication Engineering department at the Indian Institute of Technology (IIT) Roorkee, Roorkee, India. My research area includes Analog/RF and Mixed signal circuit design, mainly focused on Phase Locked Loops (PLL).
Technical Program Manager at Efabless Corporation
