Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.
semi retired, small startup for Medical (oncology/treatment) system, analog circuit designer, College Lecturer, Surfer&moto Rider.
Analog systems and circuit design engineer with extensive product development and applications experience with a strong focus on end markets. Proven ability to work closely with a diverse set of customers and clients to properly specify the requirements of a mixed-signal ASIC. Ability to manage product development from foundry selection through design, tape-out, and mass-production.
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.
I'm an AMS Design engineer. I like the IC design world and my recent goal is to be a scientist :)
I have been working on Analog/Mixed-Signal Integrated Circuits design since last 16 years. I graduated from NED UET, Karachi in 2001 and then worked with Avaz Networks, a Silicon-Valley Company on RTL design and verification of a high-density Line Echo Cancellation Engine for a couple of years. Joined Linkoping University, Sweden in 2003 for Masters in SOC, which concluded with a Masters Thesis on Sigma-Delta Modulators with Fraunhofer Institute of Integrated Circuits, Germany in 2005. The same year I joined University of Trento and Fondazione Bruno Kessler, Trento, Italy for my PhD on Readout Interface Design for MEMS Capacitive Microphones. Worked with ST-Microelectronics, Milano and Analog-Devices, Copenhagen as a Guest PhD Student. This Phd results in 20+ publications and 2 patents with 3 successful MEMS Readout ASICs.
I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.
I have more than five years’ experience in electronics integrated circuits industry. I have been involved in more than six silicon runs which were all successful and meeting expectations.
I am a experienced analog and mixed-signal circuits designer, using standard and/or custom circuits ( external IPs or from my own design ).
Developer of open source EDA tools on Open Circuit Design
Analog IC design engineer with expertise in designing analog building blocks variable gain amplifiers, active filters, frequency synthesizer (integer-N PLLs), voltage regulators.
I am a teacher at MIT Manipal , currently pursuing my Ph.D in the field of LDO voltage regulator.
Valparaiso University - College of Engineering - ECE professor
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
AMS Design Engineer Love Electronics and programing
I am a full custom analog and mixed-signal IC design consultant. I have been consulting for over 22 years following 12 years as a staff member at MIT Lincoln Laboratory.
We are building a community of OSHW Product Creators. Our focused mission is to simplify the process of smart product creation and making it available to everyone. We believe in Open Source Hardware as the foundation for addressing the massive and divergent forms and features of the new connected world.
Analog Designer
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Electrical Engineer M.Sc. Microelectronics
Working as a instruments engineer, and currently working on my masters of Microelectronic Systems Design. Passionate about designing analog/mixed signal IC's and systems
Freelancer
IC CAD, analog digital, mixed-signal IC design and test
Embedded System Engineer
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
Analog full custom design experience of Low power VOltage regulators, Bandgap reference, calibration circuits and common mode receiver. worked on SERDES IP (up to 12Gbps) compliant with USB 3.1 and SATA protocols. AS ESD ENgineer for SERDES IP Improved existing ESD network simulation strategy and ESD network for robust ESD performance reliability and automated existing current density flow for ESD for better efficiency. Technology Nodes: 14nm(FINFet), 28nm(FDSOI) 28 nm,40nm,90nm,180nm (Bulk)
Analog Designer
I am an EMC Specialist working at Renault and currently looking to fill my free time with interesting projects (Hardware, EMC, Design, Simulation)
Power IC designer for 27 years primarily in Silicon Valley.
I am a RD designer focus on power management ic design. I have about ten years working experience. Hope I can do something for this great platform ~ !
Experienced Analog/RF integrated circuit design
I am an Electrical Engineer at Marcus Engineering working primarily on embedded systems in a wide range of applications in the Medical, Military and Aerospace sectors.
Analog/Mixed-Signal IC Design Engineer
Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.
senior student-ECE departmant-faculty of engineering-ASU.
i'm expert analog mixed signal IC design engineer 7 years experience
Current working in my PhD at BarcelonaTech.
Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.
Longtime innovator in analog and mixed signal design. US Patents US2773120A and US2560234A.
HW development engineer
Electronics Engineer, passionate about science with strong technical and interpersonal skills for working in a team and successfully completing a project.
Graduated 4 tears back in engineering specialized in electronics and telecommuniation engineering with a first class. Now I am working at a startup as the team lead of the embedded design team. I am also a postgraduate student in Msc in wireless communication engineering course. Creon Solutions is my freelancer name. I do image processing, PCB and circuit designs ...etc in Freelancer.com
I've been worked as an Electrical Engineer for more than 20 years. I'd like to bring Artificial Intelligence to the EE design so that it can be "Self-driving".
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
Master's student at UFCG. Work with Cadence tools. I work with AMS and digital circuits (using Verilog language) and analog layout as well.
Enthusiastic analog designer
Worked at Cadence Design Systems for three years. Was responsible for design of PLLs for SerDes IPs
>10 years of experience in precision analog and sensor interface IC design.
Fresh grad electronics engineer and a beginner circuits designer who admires analog/RF IC design. Former intern at ADI© (Egypt) and recently a junior Analog IC designer at Si-Ware Systems (Egypt). My GP was a 5G Transceiver in the band 26.5GHz - 29.5GHz, I designed the upconversion mixer (core circuit, power combiner, LO driver).
I am an Analog design engineer graduated from Ain-shams university in 2018. My graduation project was to design a Decision Feedback Equalizer in a 10 Gb/s serial link transceiver, starting from building the circuit from scratch to layout and post layout simulations and system integration.
I am an Analog IC Designer by profession. I have loved and done circuit design from my high school days in India. I love developing new challenging circuits and seeing them work in real applications.
Graduate student of ECE department Ain Shams University, and Currently Master Student of ECE department Cairo University with major of Electronics design.
Associate professor at Pontificia Universidad Catolica de Chile, analog and mixed-signal design
I am a senior researcher in INESC-ID, Lisbon.
Analog Mixed Signal IC Designer
I am an electronic hobbyist who enjoys building different electronic circuits and systems.
Research Assistant and MSc student at Hamburg University of Technology (TUHH) - Microelectronics and Microsystems. Graduated from Faculty of Engineering, Ain Shams University - Electronics and Electrical Communication Section. ASIC projects I have done include: - FinFET Synchronous/Asynchronous Standard Cell Library. DOI: 10.1109/ICM.2016.7847881 - FinFET SRAM based PUF. DOI: 10.1109/ICCES.2017.8275272 - AC-DC Power Converters for Wireless Power Harvesting Unit in 350 nm CMOS Technology for Medical Implantable Devices
I am an IC designer graduated from faculty of engineering at Ain-shams university in EGYPT in 2018, Now I am a reserch assistant at the IC laboratory of Ain-shams university. My graduation project was to design a decision feedback equalizer (DFE) of a high speed serial link transceiver form scratch to post layout simulations and system integration.
Hardware design engineer
working as a analog design engineer in Cadence Benguluru(India)
I am researcher with goals of developing high end technologies for the future.
4+ years of VLSI Backend experience. Working as Physical Design Engineer. Expertise in Analog layouts, physical verification and Physical Design. Open to learn and explore other domains of VLSI design.
Physical Design Engineer
Associate Professor (Electrical and Electronic Engineering) Implantable chip design Low power sensors
Analog circuit designer with passion in taking challenges .Interest in ADC,DAC,PLL,SDADC,LDO.Done layout of all these blocks.
designing mixed-mode ASICs since 1986 :-)
Hi , I am Dhiraj Poojary , Analog Design Engineer by profession and looking to learn something here !!
Physical design engineer
Experienced Analog Design Engineer with strong background in HV CMOS ASICs.
Electronics Engineer with 10 years experience in microelectronics and research. Familiar with CMOS integrated circuits design, wireless communication systems, programming and lab environment, I am comfortable working for worldwide semiconductors firms. Passionate for high-tech and music, advocate for teamwork and collective intelligence to support a strong problem-solving methodology, I am curious, self-motivated, addicted to learning and re-shaping the new technologies I am exposed to. During my workday I aspire to address "real-life problems", hopefully continuing to develop my multi-disciplinary skills as a means for technical and personal enrichment.
Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.
An experimental physicist through sensor and instrumentation development.
