Co-Founder and Director of Silizium Circuits Private Limited.
im a student who want learn design VHDL
Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.
Analog systems and circuit design engineer with extensive product development and applications experience with a strong focus on end markets. Proven ability to work closely with a diverse set of customers and clients to properly specify the requirements of a mixed-signal ASIC. Ability to manage product development from foundry selection through design, tape-out, and mass-production.
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
20+ Years of Experience in Chip Design
Analog Designer
Electrical Engineer M.Sc. Microelectronics
senior student-ECE departmant-faculty of engineering-ASU.
i'm expert analog mixed signal IC design engineer 7 years experience
Current working in my PhD at BarcelonaTech.
Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.
Electronics Engineer, passionate about science with strong technical and interpersonal skills for working in a team and successfully completing a project.
I am Ashwini ,done Masters in Electronics. Very much interested to learn VLSI Physical Design
I've been worked as an Electrical Engineer for more than 20 years. I'd like to bring Artificial Intelligence to the EE design so that it can be "Self-driving".
I am VLSI Design P.G student at N.I.T , kurukshetra
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
IC Design Engineer
Master's student at UFCG. Work with Cadence tools. I work with AMS and digital circuits (using Verilog language) and analog layout as well.
Enthusiastic analog designer
>10 years of experience in precision analog and sensor interface IC design.
Fresh grad electronics engineer and a beginner circuits designer who admires analog/RF IC design. Former intern at ADI© (Egypt) and recently a junior Analog IC designer at Si-Ware Systems (Egypt). My GP was a 5G Transceiver in the band 26.5GHz - 29.5GHz, I designed the upconversion mixer (core circuit, power combiner, LO driver).
I am an Analog design engineer graduated from Ain-shams university in 2018. My graduation project was to design a Decision Feedback Equalizer in a 10 Gb/s serial link transceiver, starting from building the circuit from scratch to layout and post layout simulations and system integration.
I am an Analog IC Designer by profession. I have loved and done circuit design from my high school days in India. I love developing new challenging circuits and seeing them work in real applications.
Graduate student of ECE department Ain Shams University, and Currently Master Student of ECE department Cairo University with major of Electronics design.
I am a senior researcher in INESC-ID, Lisbon.
Analog Mixed Signal IC Designer
My current work is as an analog mixed signal circuit designer for a government R&D institute, I am also involved in characterization and testing after the chip returns from foundry.
I am an electronic hobbyist who enjoys building different electronic circuits and systems.
Research Assistant and MSc student at Hamburg University of Technology (TUHH) - Microelectronics and Microsystems. Graduated from Faculty of Engineering, Ain Shams University - Electronics and Electrical Communication Section. ASIC projects I have done include: - FinFET Synchronous/Asynchronous Standard Cell Library. DOI: 10.1109/ICM.2016.7847881 - FinFET SRAM based PUF. DOI: 10.1109/ICCES.2017.8275272 - AC-DC Power Converters for Wireless Power Harvesting Unit in 350 nm CMOS Technology for Medical Implantable Devices
VLSI design project manager
I am an IC designer graduated from faculty of engineering at Ain-shams university in EGYPT in 2018, Now I am a reserch assistant at the IC laboratory of Ain-shams university. My graduation project was to design a decision feedback equalizer (DFE) of a high speed serial link transceiver form scratch to post layout simulations and system integration.
Hardware design engineer
working as a analog design engineer in Cadence Benguluru(India)
I am researcher with goals of developing high end technologies for the future.
Teaching assistant for ASIC/FPGA and digital ICs courses.
Electronic design house subsidiary of Cinvestav Guadalajara Unit (Center for Research and Advanced Studies), a leading research center in Mexico.
Principle Engineer at efabless corporation
Associate Professor (Electrical and Electronic Engineering) Implantable chip design Low power sensors
Analog circuit designer with passion in taking challenges .Interest in ADC,DAC,PLL,SDADC,LDO.Done layout of all these blocks.
designing mixed-mode ASICs since 1986 :-)
Physical Design Engineer
Hi , I am Dhiraj Poojary , Analog Design Engineer by profession and looking to learn something here !!
Physical design engineer
Experienced Analog Design Engineer with strong background in HV CMOS ASICs.
Electronics Engineer with 10 years experience in microelectronics and research. Familiar with CMOS integrated circuits design, wireless communication systems, programming and lab environment, I am comfortable working for worldwide semiconductors firms. Passionate for high-tech and music, advocate for teamwork and collective intelligence to support a strong problem-solving methodology, I am curious, self-motivated, addicted to learning and re-shaping the new technologies I am exposed to. During my workday I aspire to address "real-life problems", hopefully continuing to develop my multi-disciplinary skills as a means for technical and personal enrichment.
Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.
An experimental physicist through sensor and instrumentation development.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. He was Mixed Signal IC designer at LSITEC and DFCHIP (Brazil) where worked for 8 years, and Pos-doc of the Universidad de Sao Paulo in collaboration with ALICE-CERN as analog IC designer in the SAMPA ASIC project. He was Adjunct Professor of the Control and Automation course at the Engineering Institute (CUVG) of UFMT for 2 years. He is currently Adjunct Professor of the Department of Electrical Engineering of the Federal University of Minas Gerais (UFMG).
"Lifer" IC designer focused on analog and power management for applications you don't want to know about
I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.
Vice President of Engineering - Seamless Microsystems. We design high performance AFEs using proprietary and patented technology that encodes the signal in the time-domain instead of voltage or current. This enables us to design low-power ADCs and amplifiers in scaled CMOS. Contact us if you'd like to hear more and engage our services.
Mad Scientist
Professor Emeritus from Georgia Institute of Technology. Developer and lecturer on analog integrated circuit design.
Interested in Design, Verification, and Hand-off of Analog IPs. Worked on the definition, modeling, design, verification of DC-DC converters, Chargers, Ideal-Diodes, LDOs, Regulators, Bandgap references, Current limiting and sensing architectures. Excited for challenges in Analog Design, Layout and Post-silicon verification.
Passionate about engineering and electronics. Love teaching and mentoring. Highly experience in analogue and RF electronics and enjoy managing projects.
I am enthusiastic at analog IC design and IC industry. Now I am design power block and analog block in Touch IC.
A recent graduate student from Syracuse University major in Electrical Engineering with focus in VLSI Designs
I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.
An experienced mixed-signal IC design engineer / design manager with over 25 years experience. Has design and led the design of multiple mixed-signal ICs through to tapeout and silicon verification. Also experienced with the delivery of IP blocks. Worked across multiple market sectors.
I am a senior Electronics and Communications Engineering student at the Faculty of Engineering, Ain Shams University, Cairo, Egypt. I have wide knowledge and some experience in analog electronics with huge passion towards it
I am an experienced semiconductor expert with twenty years of experience both in top semiconductor companies such as Sony, National Semiconductor, Analog Devices, and Cambridge Silicon Radio and much smaller companies such as Pericom and Theta Microelectronics. I designed high-volume products for customers including Quantum, Western Digital, Hewlett-Packard and Nokia. I also acted as an expert evaluator for European Union H2020 framework project calls and EURIPIDES research frameworks. Specialities: CMOS/BiCMOS, SOI CMOS analogue and radio-frequency integrated circuit design: Millimetre-wave phase shifters, vector modulators, attenuators, Phased-array transceivers, LNA (Bluetooth, FM, 802.11n) Mixer (100MHz to 4GHz) Limiting Amplifiers for optical communication circuits, Transimpedance Amplifiers, Low-power RF Amplifiers Hard-disk preamplifiers, Clock and Data Recovery (CDR) circuits, High-speed output drivers (CML), Sigma-delta converters. Xtal Oscillators, Ultra-low power CMOS circuits for RFID transponders CMOS RF-DC Energy Harvesting circuits
Experienced leader of industry and academia focusing on developing customized hardware accelerators for low power mobile, AI and IoT devices. Over 20-years hands-on experience in all aspects of SOC and processor design. Specialties: memory design (SRAM, regfile, CAM), VLSI design for best Power, Performance, and Area (PPA) design point. Power management and power conversion including dc/dc and ac/dc. Computer Architecture and Hardware accelerator using In-Memory-Computing and Emerging Technologies (RRAM)
Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.
Currently working as Assistant Professor, Quaid-i-Azam University, Islamabad, Pakistan.
PhD Scholar at Advanced MultiCore Systems Lab, IIIT-Delhi
I am an electronics engineer currently working as an intern in STMicroelectronics.
Analog/RF Engineer with 20+ years of custom IC design at the transistor level. See www.vhf.design for more background on semiconductor experience.
Virginia Microelectronics Consortium (VMEC) Professor in the ECE Department at the University of Virginia
I work as an Assistant Professor (Grade I) in the department of ECE in IIITDM Kurnool, India. My research work includes VLSI for Signal Processing and Information Security.
Masters in "Integrated Circuits & Systems" focused on Analog / Mixed Signal System/ IC design
Motivated master' Student with progressive experience in ASIC Design and a real passion for it. An energetic - self-starter and team builder. Navigates high-stress situations and achieves goals on time and under budget. Always believing in learning and solving the problem through Technology.
Research Scholar | Analog Circuits | EMI Immune Amplifiers | Neuromorphic Circuits
ULP AMS design for sensor interface
Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
I'm an experienced analog mixed signal layout design engineer. Have experience integrating IPs, Full chip layout design. I have hands on experience in TSMC 40LP, 28nm, 16ff, 7nm, GF 130nm process nodes.
Aspiring IC Design Engineer
Assistant Professor (IISc) | Ph.D. & S.M. (MIT) | B.Tech. (IIT-KGP)
A student of Electrical Engineering excited about ASIC design. My interests include Co-Processors and Computer Architecture.
PhD Student Research on Integrated Sensor Interfacing Systems featuring signal conditioning and A/D conversion. Functional blocks developed: VGA, current-steering DAC, SAR ADC, AA Filters, SPI master/slave.
I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/
An undergraduate student at the Zagazig University studying communication and Electronics Engineering, interested in Analog-Mixed Signal IC design. Keen to be a professional Mixed-Signal designer.
Still an entry-level electronic engineer. Absorbing and practising information and knowledge. Just for curiosity and fun.
Pursuing masters in VLSI at IIT INDORE.
Engineering Consultant with 20 years of experience in RF and Analog Circuit Design
Electrical engineer with PhD in micro-electronics, and more than 23 years experience in the automotive industry. Specialized in the development of CAD tools to support mixed-signal and smart-power IC design. Founder of SYDELITY b.v. a start-up company offering services and products accellerating system-level simulations.
Professor and Entrepreneur
I have been delving into the IC design industry for the last 3 years. I started with circuit designing on Virtuoso and am now working with the APR flow for the last 1.5 year
I am working as Co-founder & CTO of Upplysning Robotics, which is focused on the development of biomedical devices like digital stethoscopes with built-in ECG and PCG, auto-detect heart irregular arrhythmias, and its flagship project is the design of artificial hearts and implants inside the human body and also Cardiac Robotics medicals devices
Professor of CSE at UC Santa Cruz
Principal engineer leading PNT product development at GE Aerospace
Analog/Mixed signal designer.
I am a Newbie circuit design engineer and have keen interest in designing circuits and being part of state of the art design projects
BS EE from Stanford University and Digital Designer. Areas of focus are computer architecture, VLSI, and Analog IC. I am interested in making chips to test myself.
MS ECE (Nanoscale devices and systems) at UCSD
Student of the Russian Technological University, Moscow.
I am an Associate Professor teaching VLSI design, hardware security, and digital circuit design at Drexel University. My research interests include analysis, modeling, and design methodologies for high performance digital and mixed-signal integrated circuits, power management for SoC and microprocessor circuits, hardware security, including digital and analog obfuscation and Trojan detection, and electric and thermal modeling and characterization, signal and power integrity, and power and clock delivery for heterogeneous 2-D and 3-D circuits.
A researcher and VLSI guy
I am student and wanted to improve my knowledge in VLSI
I am a learner with a enthusiasm towards new concepts.
Ph.D. scholar in electrical engineering department at IIT Indore
MS Research scholar at Indian Institute of Technology, Indore, India
Electrical Engineering PhD student at Northwestern studying Spintronics and Probabilistic Computing.
Postgraduate student at IIT INDORE
I have been delving into the IC design industry for the last 3 years. I started with circuit designing on Virtuoso and am now working with the APR flow for the last 1.5 year
I have been delving into the IC design industry for the last 3 years. I started with circuit designing on Virtuoso and am now working with the APR flow for the last 1 year
A hard working IC Design master student aiming excellency and professional experience in the field of Integrated Circuit Design specially analog and mixed signal design like Data converters, LDO, Opamp and Bandgap reference.
Analog Circuit Design Engineer with 22+ years of experience. Areas of expertise are OpAmp, BandGap, POR & ADCs.
Founder | Product Leader | Analog IC Designer
Doctoral student at the Tokyo Institute of Technology.
An aspiring Analog/RF IC designer aiming to make a difference through existing knowledge and innovative ideas.
Doctoral Researcher at the Interdisciplinary Institute for Technological Innovation - 3IT, Sherbrooke. Working on engineering Memristor based neuromorphic hardware for edge AI applications. Graduated from Birla Institute of Technology and Science, Pilani, Goa, India with a double major in Biological Sciences and Electrical and Electronics Engineering. Interested in Neuromorphic engineering, Device modeling, Computation in memory, machine learning, and Quantum computing
Analog mixed signal IC design professional with 22 years of experience
I am a fourth year Electrical engineering student interested in design and verification of digital and analog integrated circuits. - I have experience doing layout for RFIC using SOI processes where I gained extensive knowledge in device physics, floorplanning, ESD protection techniques, and techniques to mitigate manufacturing limitations -I have extensive experience using Cadence Virtuoso layout XL , running verification simulations using Cadence ADE Explorer, EMX, and PEX.
I’m a research student at Odisha University of Technology and Research working for better understanding of Low Power Electronics Circuit . My research and career interests lie in the Application specific Integrated circuits and Analog Mixed Signal with expertise in circuit design and programming. With a board skill set covering the important facts in the semiconductor industries, I am looking for exciting opportunities in the same. I enjoy generating new ideas and devising feasible solutions to broadly relevant problems. My colleagues would describe me as a driven, resourceful individual who maintains a positive, proactive attitude when faced with adversity. Currently, I’m seeking opportunities that will allow me to develop and promote technologies that benefit human society.
Md. Sajjad Hossain is currently doing his PhD in University of South Alabama and working as a graduate research assistant in IMPACT Lab. He received his B.Sc in Electronics & Telecommunication Engineering from Rajshahi University of Engineering & Technology (RUET), in December 2016. He completed his M.Eng. IT Convergence Engineering in 2021.02. He was a Graduate research assistant with the Networked systems Lab. (NSL), of the School of Electronics Engineering, Kumoh National Institute of Technology, Gumi, South Korea from 2019-2021. His research area includes VLSI, Machine Learning, Edge/Fog Computing and the industrial IoT (IIoT).
Currently working as a Graduate Instructor in the department of Electrical and Computer Engineering and pursuing my Ph.D. in Electrical Engineering at the University of Missouri-Columbia. My research focuses on the development and design of low power decision-making Integrated Circuit (IC) using different type of Ai/Machine-Learning techniques. Besides researching on developing future technology, I'm also a professionally trained Vocalist in traditional South-Asian music majoring in Tagore and have experience in freelancing of 5 years in Digital Art and Graphics.
csconcretereadymix
Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.
I am an Electrical Engineering working VLSI design farm with 7 tape-out experiences.
Electronics enginner
A senior year electrical engineering student with expeirence doing IC layput for Mixed signal analog circuits such as DSA, RF Switches, Power switches, and logic blocks.
Ph.D Student studying analog/mixed-signal VLSI at Brigham Young University
Working as Professor in an Engineering College, I teach VLSI related subjects like HDL, CMOS design, Verification and Testing
Program manager with more than 25 years experience in the semiconductor industry. Expertise in EDA tools, analogue, RF and high-voltage PDK development, sensor design, design support for electro-magnetic compatibility, ESD and functional safety.
Current iOS Programmer, EE with decade of physical design experience in mixed signal - worked on POWER architecture PLLS.
I'm Harsha,I'm pursuing my undergraduate in the domain of Electronics and Communication Engineering from SRM University AP.
I'm a double-degree PhD candidate at University of São Paulo and Communauté Université Grenoble-Alpes with experience in analog/RF design and layouting at integrated technologies and interposers, with experience in slow-wave devices.
30+ years in IC design, completed several NOR/NAND flash projects, and running in production.
I would like to think I am a safety-focused, results-driven, and professional Electronics & Communication Engineer and M Tech in Electronics & Communication Engineering with specialization in VLSI Design, who can be relied upon to carry out my tasks competently within strict rules and procedures in a fast and efficient manner.
Professor for microelectronics
I am professor at Dept of EEE, BUET, Passionate to teach students IC Design and Fabrication Skill.
I'm Harsha, pursuing my under graduation in the stream of Electronics and Communication Engineering at SRM University AP
ECE Undergraduate Student @ Guru Gobind Singh Indraprastha University
Pursuing Ph. D degree at Ulsan National Institute of Science and Technology (UNIST) at South Korea. Wrote 4 ISSCC papers, 2 as 1st author, and 2 as co-authors. Want to develop new IP at efabless. Thanks!
Pham Van Khoa received the B.S. degree in Computer Technology and PhD. degree in Electronic Engineering from the University of Technology and Education, Vietnam and Kookmin University, Korea, respectively. In 2010, he joined ICDREC (Integrated Circuit Design Research and Education Center), where he was engaged in the development of VN8-01 MCU, the first commercial micro-controller fully designed and fabricated by Vietnamese. In 2011, he joined University of Technology and Education HCMC, where he is currently a senior lecturer at Department of Computer and Communication Engineering. His research interests include Low-power VLSI solutions for Memory, Energy Harvesting, Memristor-based Neuromorphic Computing Systems, Neural Network Accelerators and MP-System-on-Chip based designs.
My area of interest is Analog and Mixed signal circuit design. I teach Electronic Circuit, VLSI design and Signals & Systems for under graduate students and Analog Integrated Circuit Design, Data Converters and Clock & power management circuit courses for Masters students. I also teach VLSI lab courses for both both undergraduate and masters students. Every year I supervise both undergraduate and masters students in analog circuit design projects. Presently I am involved in SRC project as Co-task leader in Analog and Mixed Signal circuit verification project using Machine learning techniques.
Analog VLSI Design Enthusiast
High Performance, High Frequency Analog, Microwave, RF and Optical Chip and Package Test Software and Hardware, Multi-Chip System Integration and Reliability
Juan Camilo Castellanos received in 2009 his B.S. degree in electronic engineering from National University of Colombia in Bogota, Colombia. In 2011, he received the M.S. degree in electrical engineering from State University of Campinas, Brazil. Later, he enrolled in the Brazilian IC design programme, called CI-Brasil. In 2013, he was analogue and mixed signal designer in the non-volatile memory group at Freescale Semiconductors (Now NXP) in Brazil. He received the Ph.D. degree from Eindhoven University of Technology, The Netherlands in 2018. He was lecturer in the Informatics Department at State University of Ponta Grossa in Brazil. In 2019, he was professor at the department of mobility engineering at Federal University of Santa Catarina (UFSC), Brazil. Since 2020, he joined as professor at the Department of Electrotechnics at Federal University of Technology - Paraná/Brazil (UTFPR). His research interest includes embedded systems (IoT, smart sensors, sensor fusion, DSPs, microcontrollers, FPGAs) and analogue and mixed-signal integrated circuits for power management (DC-DC converters, charge pumps, LED drivers and current/voltage monitors, energy harvesting).
Experienced Senior Design Engineer with a demonstrated history of working in the electrical and electronic manufacturing industry. Skilled in DAC, SPICE, ADCs, Electronics Hardware Design, and Management. Strong engineering professional with a M-Tech focused in VLSI System Designs from Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering &Technology and also a B-Tech Degree in the field of Electrical, Electronics and Communications Engineering from Mahatma Gandhi Institute of Technology.
Master's research student in IC design has hands-on experience on Cadence tools like Virtuoso, Genus, Innovus, Calibre. Motivated to learn more in the field of IC design
I'm currently working as an Optics Design Engineer for Biotech applications. My main interests are (Micro/Opto)Electronics, Optics and Photonics, Data Science and Embedded Systems.
Electronic Engineer from the Federal University of Santa Catarina (Brazil). Master in Electrical Engineering from UFSC (thesis title: CMOS Ultra-Low-Voltage Ring Oscillators). Interested in the areas of Sensors, Ultra-Low Power Circuits and MOS modeling.
Currently enrolled as a MS fellow in EE specialization in IC Design.
Currently enrolled as a MS fellow in EE specialization in IC Design. An ambitious research student aiming to gain knowledge and experience expertise in IC designing.
I have done my undergraduate in Electronic Engineering. Right now I am doing MS in Electrical Engineering(Specialized in IC Design) from NUCES FAST, Islamabad.
Im designated as a lab engineer at Fast NU Isl. My area of expertise is analog and Rf ic design.
I am Anuj Kumar Jha and pursuing MTech at IIIT Bangalore in VLSI
hi, i am jawad. I have done my bachelors in electrical engineering from UET Lahore, Currently, as a research student, i am interested in SoC's. My future goals is to develop expertise in analog, mixed signal and RF circuits designs.
I have done undergraduate in Electronics Engineering and doing MS in IC design from NUCES-Fast Islamabad.
my name is belete fiseha Iam from Ethiopia my education level is BA degree and currently online learning scholar ship MBA at uopeople
I have been a Professor in The Dept. of Electronics and Communication, College of Engineering, Guindy (CEG), Anna University, Chennai, India and I have retired last year after being on the faculty of this University for twenty eight years. I continue to teach courses as a Guest Faculty in the same Dept. at CEG, Anna University in the areas of Analog, Mixed Signal, RF and Communication Systems and IC Design. I have supervised student teams in building Small Satellites (Avionics subsystems) and also CMOS IC Designs. I have also supervised Masters and Doctoral thesis in the areas of GPS (baseband), uP Clock PLLs and CDRs, RF LNAs, and resonant sensors.
I am a Senior Undergraduate in Electrical Engineering Department at IIT Gandhinagar, India. VLSI Design and the ability to tweak at the hardware level interest me a lot!
PhD Scholar IIT Indore India
VLSI Professional with 2.3 years of experience and adequate knowledge in RTL Design, UPF, SDC, Lint, CDC, Synthesis, Physical Design, STA and Scripting. I love Computers and I am interested in RISC V
I am a graduate student at University of Texas at Austin
RF/Analog IC design and SOC
Electrical Engineering PhD student at BYU
interested in rapid development environment concept of Caravel
I am a teacher/researcher with the Federal University of Santa Catarina-Brazil. My research main topics are: Analog/Mixed signal Integrated circuits for biomedical applications.
Assistant Professor. ECE. University of Pittsburgh. Interests: Neuromorphic and Biomedical Systems Design
Open-source software developer with 30 years experience in back-end verification.
I am extremely dedicated individual looking for an opportunity to learn and explore new ways to implement the latest technology. My dream is to join a core company and work on on-site projects. I believe my skills and hunger to learn will turn me into an important asset to the company. Thank you
PhD in microelectronics, Professional Skills -Electronics circuit design; both IC and discrete circuit design. -Experienced in circuit design and layout in different CMOS technologies with tape-out experiences from 0.xn--18m-yyc to 40nm.
Just another big dreaming engineer with a desire to learn silicon microfab
I am a senior researcher at Nokia Bell Labs. I am specialized in the design of RFIC and mmWave IC.
Received B.S. degree from Electrical and Electronics Engineering in Middle East Technical University, Turkey, in 2019. Currently, pursuing M.S. degree from Electronics Engineering in Bogazici University, Turkey. Research interests are computer architecture, hardware security and secure memory architecture
Digital System Designer.
Analog IC design engineer with background in sensor Front-End design and semiconductor radiation detectors.
Chip Design CAD Expert
M Tech student from VIT University. Interested in ASIC and SoC design.
Analog and rfic design professional working since 1997 , Mainly products on wireless ic design, development and testing. mobile, bluetooth, wlan, uwb, rfid , zigbee chips. blocks receiver, transmitter, pll, ldo, mixer, lna, pa, switch , pmic,
Esmaeil NAJAFIAGHDAM was born in Zonouz, Iran, in 1964. He received the B.E. degree from University of Sistan and Baluchestan, Zahedan, Iran, in 1990, and the M.S. degree from Amir-Kabir University of Technology, Tehran, Iran, in 1994, both in electronic engineering. In 1995, he joined the Department of Electric Engineering at Sahand University of Technology, Tabriz, Iran, as a Lecturer. In 2002, he started his PhD program dealing with a high-performance bandpass Delta Sigma ADC. The research program is directed by Prof. P. Benabes at SUPELEC, France. Esmaeil NAJAFI AGHDAM is now a Professor at Sahand University of Technology. His current research interests include mixed mode electronic circuits, Delta Sigma Converters, RFIC design, Ultrasonic circuits and Electronic measurement.
I am a Ph.D. student at the Faculty of Engineering Sciences, University College London. My Ph.D. research focuses on the System-on-Chip design of power electronic converters.
An electronics and communication engineering student with a great passion for RF and analog design.
Computer Engineering Student and hardware design enthusiast. Enjoys programming and soldering.
Analog Mixed Signal Design Engineer
I am a student at IIIT Bangalore pursuing Integrated Mtech in Electronica and Communications Engineering and am fascinated about silicon wafers and want to pursue a career and build a revolution in this domain.
Analog & RF designs in interesting, escpically in clock circuits.
Analog design engineer with 3+ years of experience in the analog/ mixed signal design, verification and lab validation.
verilog and MCU ｄｅｓｉｇｎ
Quantum Photonics Engineer, passionate about quantum technologies will transform our world.
Alejandro Bautista received the M.Sc. and Ph.D. with a specialty in Electronics from INAOE, in 2014 and 2018 respectively. In 2016 he was a visiting scholar in the Electrical Engineering Department of the University of Texas A & M under the supervision of Dr. Jose Silva-Martinez. His research interest includes RF/mixed-mode circuits & systems, wireless communications, low-power.
Physical Design Engineer at Laksh Semiconductors
I am hager mohamad diff allh, from faculty of engineering-MINIA university (Electrical engineering department).
fresh. grad electronics and communication engineering minia university advanced analog CMOS circuit design
Semi retired adjunct professor 45 years of IC design experience in mixed signal with over 100 patents. Presently entrepreneur working on PhD at ASU Have facilities and equipment to design and characterize chips at home lab and at 2 universities.
I am an Electronics Engineer now continuing my MS in electronics from COMSATS Abbottabad in Analogue Chip Design.
I'm a student who is pursuing M.Tech in VLSI Design from VIT, Chennai . I want to explore deeply the field of study, excel in the research about the subject , enhance my learning and skills.
IC design Engineer
Assistant Professor in the Department of Electrical and Computer Engineering at The University of Mississippi
Professor for electronic circuits at Karlsruhe University of Applied Sciences in Germany since 2020. I received the Dipl.-Ing.(FH) degree from the Karlsruhe University of Applied Sciences, Germany in 2005, and the Ph.D. degree in mechatronics from Johannes Kepler University Linz, Austria, in 2014. From 2005 to 2009, I worked as an IC designer at Bosch GmbH in Reutlingen. From 2009 to 2015, I was a research assistant at Johannes Kepler University Linz. In 2015, I headed the mm-wave wireless research group at IHP Microelectronics. I have authored and coauthored more than 100 journal and conference articles. I received the 2018 VDE ITG-Prize and the 2019 APMC best paper award for his outstanding works on integrated mm-wave radar transceivers in SiGe BiCMOS technologies.
I am an Assistant Professor in the VLSI vertical of Department of ECE at RV College of Engineering, Bengaluru, Karnataka. I am a passionate teacher who teaches various courses in VLSI domain. My research interests are in the areas of Analog and RFIC Design. I got several opportunities at RVCE to implement various personalized teaching methods for the students, facilitated experiential learning, adapted innovative techniques in teaching and learning through flipped classroom and blended learning approaches. I am currently responsible for the curriculum design and development for courses in VLSI domain. I am also responsible for introducing new electives in specific areas. I have a YouTube channel with 300 + videos on the courses taught so far for the benefit of a wider student community.
I am an Assistant Professor in the Electrical Engineering Department. My research activities are in Neuromorphic Computing and Engineering and span from the development of efficient models of computation to novel microelectronic architectures, with CMOS and emerging technologies, for both efficient deep learning and brain-inspired algorithms. My long-term research goal is to understand the principles of computation in natural neural systems and apply those for the development of a new generation of energy-efficient sensing and computing technologies. My research outputs find use in several application domains as robotics, machine vision, temporal signal processing, and biomedical signal analysis.
Hon-Piu Lam, is a Ph.D. candidate in the Department of Electronic and Computer Engineering of the Hong Kong University of Science and Technology (HKUST). He was an analog IC designer engineer in Valence Semiconductor from 2004 to 2007. From 2007 to 2015, he joined Fujitsu Semiconductor focusing on the embedded NOR flash design. He has been a researcher in HKUST focusing on the integrated power electronic and data converter. His research interests include readout electronics, integrated power electronics and radiation hardened electronics for experimental physics.
Analog IC designer, Assistant Professor at Oklahoma State University
i am electronic engineering student
An avid learner in Analog integrated circuit design
IC Designer
A graduating IC design student with lots of passion and interest for electronics design!
Completed PhD in the field of Low Power VLSI Circuit Design. Area of Interests are: Low Power VLSI design, Approximate Computing and Embedded Systems
MS Electrical Engineering Fellow with a focus on Integrated Circuits and Systems Design. Skilled in Cadence (Virtuoso, Innovus and Genus)
I am a PhD student at the Indian Institute of Science Bangalore. I do research in the area of RF and mixed-signal circuit design.
A student of Keio Univ in Japan, interested in analog circuits rather than digital ones.
Graduate student passionate about integrated circuit design for biomedical applications
D Gracia Nirmala Rani received the B.E. degree in Electronics and Communication Engineering from Syed Ammal Engg College, Madurai, India, in 2004, and M.E. degree in VLSI Design from Karunya University, Coimbatore, India in 2007. She has awarded Ph.D. degree in VLSI Design from Anna University, Chennai India in 2014. She is working as an Associate Professor in Thiagarajar College of Engineering, Madurai since 2007. She teaches courses on system/digital and analog electronic design and VLSI processor architectures. Currently, five research scholars are doing their research under her guidance. She has authored or co-authored 42 international journal and conference papers like IET Circuits, Systems and Devices, Spinger, Wiley and Elsevier Publications. Also she has published 3 Books/Book Chapter in Springer LNCS and CCIS Publications. She has filed 2 Patent in BioMedical Engineering Field. She has guided the B.E students’ project which won the India Cadence Design Contest Award 2017 and 2018 instituted by Cadence Design System Pvt Ltd, Bangalore. In 2018, she was the technical program chair of the 22nd International Symposium on VLSI Design and Test. She is serving as a reviewer in IEEE Transaction on Nanotechnology, Elsevier and Inderscience Journals, respectively. Her research interests include RFIC Design, Physical Design Automation, Optimization Algorithms using Machine learning for IC and mixed signal circuits and systems for Bio-medical Devices.
I am a professor in the department of electrical and computer engineering at University of Cincinnati. My areas of expertise are: CMOS, Beyond-CMOS devices such as RRAM, FeFETs, gated-RRAM, TFTs, novel device design, fabrication, and testing, neuromorphic computing, and hardware security.
Analog & Memory IC design Engineer
Mixed Signal circuit designer with over 40 years experience.
I am a Professor at the University of New Mexico, and participate in two startups, Enthentica and IC-Safety, LLC to build PUF technology
I am a Masters fellow student of RFCS2 Lab in IC Designing.
I am a avid analog-RF mixed signal designer. Currently I am experimenting with novel design techniques using open-source tools.
An electrical engineering student studying from FAST-NUCES with a vested interest in IC design.
Automation enthusiast (likes to code in Perl). At this time, Doing Master's in VLSI Design and working as an intern @intel. Great learning experience doing both simultaneously. Have experience designing in both circuit (Low power & timing) & device level (high performance designs for digital applications). Obtained honor of 3rd position in concept design competition by ISRO for designing temperature & radiation resistant Tunnel FET. Would love to work with all device technology enthusiasts as opportunities arise.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
Trying never to sit back and enjoy but to come forward and prove myself
I am en Electronics Engineer currently Pursuing my Masters in IC design from FAST NUCES Islamabad.
I am a PhD student at IISC Bangalore. I work on RF and mixed-signal circuit design.
Love for ELectronics Chips Designing, Eager for knowledge. Close to Nature and meet me on the success road.
electronic system designer / software and hardware engineer, embeded system expert, signal expert, proccess designer, researcher, Developer of complexity and reversal wantings. Reverse engineer. i addopt my whole life to this science. thank you for presentings of quantum, psych
Ajith Ravindran (Senior Member, IEEE) received the B.Tech. degree in electronics and communication engineering and the M.Tech. degree in VLSI and embedded system from the Saintgits College of Engineering, Kottayam, India, in 2010 and 2013, respectively. I have been working as an Assistant Professor with the Electronics and Communication Engineering Department, Saintgits College of Engineering, since 2013. Authored many refereed international journals and conference publications. My research interests include digital IC design, microelectronics, and optical MEMS.
I am Dr. Naushad Alam working as an Associate Professor in the Department of Electronics Engineering, Z H College of Engineering & Technology, Aligarh Muslim University, Aligarh, India. I received B. Tech. degree in Electronics & Communication Engineering from Jamia Millia Islamia, New Delhi in 2003, and M. Tech. Degree in Electronic Circuits & Systems Design from Aligarh Muslim University, Aligarh in 2009. I earned Ph.D. degree in Microelectronics from Indian Institute of Technology Roorkee, India in 2013. My doctoral work was on nanoscale circuit design considering the impact of process-induced mechanical stress. He has published 29 papers in SCI indexed journals that include 10 IEEE Transactions and 33 papers in reputed conferences. I have supervised two PhD thesis in the area of device-circuit co-design and presently supervising two more PhD students. I have also successfully executed a UGC funded research project on TFET based SRAM cell design for IoT Applications. My research interests include device-circuit co-design, robust nanoscale circuit design, low power circuit design, PVT tolerant circuit design, Near-Threshold/Sub-Threshold circuit design etc.
I am a Graduate Research Assistant at the University of Tennessee Knoxville, pursuing the PhD degree in Mixed-Signal Analog Circuit design.
I have done electronic engineering from University of Engineering and Technology Peshawar in 2021, currently, i am doing MS in Electrical Engineering (Specialization in IC Design) from National University of Computer and Emerging Science(FAST-NUCES).
Adjunct professor in Columbia University.
Mtech student in VLSI & Embedded Systems
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Mixed-signal designer
Hi, I'm a student at UACJ and I like integrated circuit designs.
I have been working as a Full Professor in Electronics Engineering Department, AMU, Aligarh.
MS in IC Design Fellow, RFCS2 lab at FAST-NU Islamabad, Pakistan
Research Scholar at Department of Electrical Engineering, Indian Institute of Technology Ropar, India. Current research area is EMI Immune Amplifiers. Previous works include a Memristive adaptable ramp generator circuit for a on-chip training signal generator for trainable DAC, Modeling and hardware implementation of digital image watermarking algorithms.
Graduate Research Assistant at Washington University in St. Louis
An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.
Silicon Entrepreneur with extensive experience in Digital Physical Design, EDA and HPC Infrastructures for Electronic Design.
M.Tech (VLSI Design and Embedded System) Actively looking for opportunities in the VLSI field
U.G. Student at IIT Gandhinagar.
I am a student pursuing my masters in the field of VLSI
PURSUING M-TECH IN VLSI SPECIALIZATION , FROM IIIT BANGALORE
A digital design engineer, interested in memory hierarchies and high speed interfaces.
I am Abhishek Pamadi , studying engineering in KLE Technological University, I have keen interest in VLSI domain
Still a Bachelor student..Trying to get know more always!!
Rock head Design Engineer
Hello I'm sultan, and I'm from KLE technological University hubli and I'm very exited to do this course on picorisc.
I am an analog circuit designer with 6+ yrs of designing various PMIC and high speed SerDes IP design.
electronic engineer with knowledge in AMS design
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
Founder of e-td55 Desing House for analog circuit and sensors
President and CEO
I am passionate VLSI trainee looking to explore my skills and build few projects which enhance my coding and debugging skills.
Analog and Mixed Signals Engineering Students
current I am doing postgraduation in a Micro and Nanoelectronics
i'm an eletronic engineer there are studing to became an IP desing
Graduate equipped with a Bachelor of Engineering in Electronics and communication with a concentration in Semiconductor and VLSI design with hands-on experience in CAD tools and to join a reputable organization to begin a fulfilling, lifelong career.
An analog mixed-signal circuit designer for low-power precision sensor interfaces. See https://staff.aist.go.jp/ippei.akita/
Analog Design Engineer
Lecturer at the Department of Computer Engineering, Kwame Nkrumah University of Science and Technology, KNUST. My primary interest is in analog and mixed-signal design.
Dad. Partner. Scientist. Activist. Maker. — He/His
IC designer with more than 25 years post Ph.D. experience. Specialising in RF, RFIC, analog and mixed-signal. Wide experience in Architecture, system and circuit design. RF front-end module design for cellular with CMOS PA. Over 40 patents issued.
Professor, Department of Electrical and Computer Engineering Research Interests: Non-volatile Memories, solid state imaging systems, low power microelectronics, microelectronic process technology
i am engineering final year student and i am doing VLSI project
Associate Professor in Electrical and Computer Engr. Dept. Teaching and Research in Microelectronics. Teaching interests are in both discrete and integrated electronics, both for undergraduate electronics labs and projects and graduate integrated circuit design, verification, prototype, and test.
Hello. I am Liam and Analog enginner in South Korea. I want to participate this great opputinity and share my design to other people.
I have msc in microelectronics from the National and Kapodistrian University of Athens, Greece (EKPA). I am working in IC industry. My passion is Analog Filters Passive or Active. I have a library full of books about Analog Filters my favorite from the Authors Van Valkenburg and Schaumann. Due to the nature of active filters, I am also interested in design of Op Amps
Ph.D. in electrical engineering, 25 years experience in mixed-signal IC design
A fresh graduate interested in chip designing, learning new things everyday!
Electrical engineer with interests in ASIC design, biomedical imaging, and scientific instrumentation.
I have completed my M.Tech in VLSI Design from NIT Hamirpur, looking for a career in the VLSI Design.
Analog,RF,Embedded Design Engineer having 2-3 years of experience in PCB Design, CMOS IC Design with hands on RF test equipment and testing experience
Amel is an Digital IC designer interested , used to work on HDL based Design for testability, Formal verification of Semi custom and IP based SOC DFT. Currently, working on IC design for Reliability. She designed a Test structures chip for Bias Temperature Instability characterization and analysis using TSMC 180nm Technology.
Lecturer, Department of Electrical Engineering Institut Teknologi Sepuluh Nopember INDONESIA
I am currently a second year PhD. student working in the field of Electrical Engineering at the University of Virginia. My research interests include Analog/Mixed Signal circuit design, Asynchronous computing hardware design, stochastic computing and Ultra-Wide Band transmission circuits
I'm a PhD student working to make mixed-signal chip design more accessible, drawing inspiration from software development techniques. Prior to starting the PhD program, I spent a number of years working in industry at both the chip- and PCB-level on optical sensors and power systems.
Dr Tapas Kumar Maiti, a former associate professor at Hiroshima University Japan, moved to DA-IICT India where he is a faculty member, since June 2019. He was a visiting faculty to IIEST-Shibpur. He has amazing research experience at McMaster University, Canada and IIT-Kharagpur. He has published more than 100 papers in reputed journals and conferences, and also co-authored a book. He received ICMM Excellent Presentation Award, IAAM Scientist Medal, and University Gold Medal. He is a member of IEEE, and Life Member of IEI. Currently, he is working in the areas of Intelligent Computing Devices, Robotics, and Cybernetics.
Mixed-Signal Integrated Circuits instructor and researcher.
PhD Student, School of Electrical and Computer Engineering, Purdue University, USA. Research interests include Mixed Signal Circuits, High Speed Circuits and Digital System Design
Israa Y. I. AbuShawish received the B. Sc degree in electrical and electronics engineering in 2018/2019 (Hons.). She joined the M.Sc. in electrical and electronics engineering from the University of Sharjah in 2019 and in September 2022 she received the degree. She has been working as a teacher assistant with the Department of Electrical and Computer Engineering, University of Sharjah, UAE since 2019. Currently, she worked as a researcher with the research group: Mixed Analog-Digital Smart Electronic Circuits and Systems (MADSECS) in University of Sharjah, which is one of the specialized Research Groups affiliated to the Research Institute for Sciences and Engineering. Her master’s thesis involves the design of low-frequency amplifiers based on highly linear pseudo-resistor and using programmable Analog Building Blocks, such as CMOS rail-to-rail operational amplifiers and Digital programmable operational transconductance amplifiers. She has published several research papers in international conferences and Journals. Her research interests include mixed analog digital IC design, Bio-medical amplifiers and operational amplifier circuit design. Currently she is pursuing a Doctor of Philosophy in Electrical Engineering, at United Arab Emirates University (UAEU).
I am accomplished digital design engineer having 8 years of industrial expertise . I am currently working on IP design and IP integrations stuffs .
An aspiring microelectronics student that is keen on learning state-of-the-art technology, then participating in advancing it!
Electrical Engineer, pursuing a Masters in Microelectronics
I am a professor of Neuroprosthetics at Newcastle University. My primary interest is in developing implantable medical devices to treat neurological conditions.
Microelectronics Enthusiastic, Vast experience in embedded design for various domains.
Adroitec Systems is design Services Company for the VLSI and Embedded Software. Founded in 2017, Adroitec Systems is having Register Office at Visakhapatnam with branch offices in Bangalore. Adroitec Systems delivers cutting edge solutions across a diverse portfolio of services including Physical Design, Physical Verification, and Design Verification. With about 50 highly qualified employees.
I am a young student, growing high with a passion for VLSI. I am highly interested in working on high-speed low-power RTL chip design.
Semiconductor technologist with deep expertise in device fabrication and mixed signal circuit design for high-performance compute applications.
working as a assistant professor in the department of ECE ICFAITECH
I am a fresher interested in VLSI design. I have completed my Masters in VLSI Systems Design in the year 2020.
M. Pardo (Senior Member, IEEE) received the B.S. degree in electronics engineering from Universidad del Norte, Barranquilla, Colombia, in 2002, and the M.Sc. and Ph.D. degrees in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, USA, in 2007 and 2012, respectively. He is currently an Electronics and Electrical Engineering Department Graduate Programs Coordinator with Universidad del Norte and leads the electronic analog design area. His research interests include the areas of oscillators, energy harvesters, and renewable energy systems.
RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.
I'm currently a PhD candidate at Stanford studying Electrical Engineering with Prof. Priyanka Raina. I graduated from Princeton with high honors in Electrical Engineering and certificates in Applications of Computing and Engineering Physics. I completed my Stanford M.S. degree in EE; my current PhD research focuses on emerging memory/circuit technologies (resistive RAM/NEM relays) and efficient reconfigurable computing (FPGAs/CGRAs). I consider myself an eclectic learner who has never been satisfied to work in just a single area. In the past, I've done research projects across an extremely wide array of subjects, including oxide nanoelectronics (Prof. Patrick Irvin, Pitt), stochastic simulation of biochemical processes (Prof. Marcus Dittrich, PSC), deep learning applied to petroleum well data (Prof. Verena Kaynig-Fittkau, Harvard/QRI), and development of quantum cascade devices in group-IV materials (Prof. Claire Gmachl, Princeton). My senior thesis at Princeton with Prof. Prateek Mittal was focused on privacy threats posed by Content Delivery Networks. I've also worked as a software intern at two companies, GoFundMe and Amazon; there, I took on data science and analytics problems affecting business. Recently, I completed an (entirely virtual!) internship at NVIDIA focused on improving circuit design with AI. Additionally, I have several personal projects I'm proud of: an analytics engine for online Set! to understand how people learn the card game, enabling Amazon Alexa home assistants to rap battle each other, studying graph techniques for understanding musical collaborations... and so on. I love meeting/hearing ideas from new people, so feel free to contact me. Cheers!
I am an analog design engineer with over 10 years of experience. Most of designs lie in the field of power management (DC/DC converters), frequency synthesis (phase-locked loops), wireless power and data transfer (NFC front-ends as well as medical implants).
I'm the CEO of a fabless semiconductor start-up company and have more than 15 years experience in designing mixed-signal ASICs on various foundry processes.
I am currently a Sr. Hardware Engineer at Tesla working on Autopilot applications
Hi I'm a MASc Student at University of Toronto. My research focuses are FPGA architecture, DL Acceleration, Heterogenous devices and CAD tools.
My name is Sunil Parmar, I have done a master from IIT-Bombay in 2005 and a bachelors from Gujarat University in 2003. After post-graduation, I joined a service company in Hyderabad and later worked with Intel Bangalore. I have worked with the Samsung R&D center in South Korea for Silicon photonics applications and later contributed in Samsung's DDR4 memory IO design. As an employee, I have published few patents and papers. In 2016, I returned to India with a very ambitious goal to set up a semiconductor product company called Powency Circuit Private Limited in the power management domain. In between, After Covid, I decided to develop a MEMS Microphone product and started a project called Sikern. We are currently a small team having three design engineers, one packaging expert and one management staff. We are working with a Japanese supplier and a Malaysian packaging group for our product development. And developing our own ASIC for this MEMS microphone. We started working with a smartphone customer in India for their upcoming mobile model. And hope to work with many more customers within India as well across the globe for our Microphone product.
As an analog / mixed mode designer for over 30 years. Innovators and always curious over new things.
Full-Time Professor of the Research in Computer Centre of the National Polytechnic Institute of Mexico. My principal area of work is related with the CMOS Analog Design, Digital Design, Soft Computing and Bioinformatics.
Master's student at Newcastle University, UK. Semiconductor enthusiast.
Analog IC Design Engineer for research and development of ultimate power supply miniaturization using custom eGaN IC.
I am Dr. Chandra Sekhar Dash, Currently serving as Associate Professor, In Centurion University of Technology and Management, Odisha.
I am a current Master's student in IC (Integrated Circuit) and Systems Design, as well as a Research Assistant at the Micro Nanoelectronics (MiNE) Lab located at SEECS NUST. I completed my Bachelor's degree in Electronics Engineering from UET Peshawar. As a member of the MiNE Lab team, I am involved in cutting-edge research in the field of micro and nanoelectronics, with a specific focus on the design and development of integrated circuits and systems. My academic and research background has provided me with a strong foundation in electronics engineering, and I am passionate about utilizing my skills to contribute to the development of innovative technologies in this field.
Currently an eighth semester student of electronic engineering, interested in IC design and continue learning, with experience in verilog, matlab, digital design, TSMC 180 nm design kit. As a student I have also taken the support of subjects in my career as a funament of analog circuits.
"Architecting the dreams of a digital future, pixel by pixel, gate by gate."
I'm an ASIC Design Engineer with a focus on SoC verification. With over three years of experience in the field, I have had the privilege of successfully completing and taping out three projects. My expertise lies in ensuring the functionality and performance of complex System-on-Chip designs through thorough verification methodologies. Throughout my career, I have gained a deep understanding of the entire design flow, from specification and architectural exploration to RTL coding and verification. I am proficient in industry-standard verification languages and methodologies, such as SystemVerilog and UVM.
EE PCB, Systems, Mechnical, Cooling, Power Used to sling a lot of gates (polygons) in esoteric processes (Gallium Arsenide, JJ)
I am interested in increasing my experience and knowledge, helping people especially students and young professionals. Making a positive impact in my surroundings is my main concern. ★ I received my B.Sc. in Electronics and Communications Engineering from Minia University, Egypt in 2013. ★ I received my M.Sc. in Electrical Engineering from Minia University in 2022. The thesis title was: Design of Programmable Multi-Standard RF-to-Digital Receiver for Wideband Wireless Applications. The work included: ⦿ Modeling PWM based Software-defined radios using Matlab ⦿ The design of a high-speed comparator using TSMC 65nm technology on Cadence Virtuoso EDA. ⦿ I have experience in analog/mixed signal design, modeling using Matlab and simulation using Cadence Virtuoso and ADS. ⦿ I have research experience and scientific writing skills. We published three papers in international conferences based on this thesis. ★ I am a full time EHV OHTLs and cables Projects Engineer in EETC. ★ I worked as an OHTL installation and maintenance Engineer in EETC for four years. I supervised over renewing and installing new OHTL besides the daily maintenance tasks.
Analog Mixed-Signal Engineer at InertialWave. Developing next gen electronics for resonator control and sensing.
I am Associate Professor in Department of Electrical Engineering at IIT Bombay, India. My interests are embedded non-volatile memory based systems for edge AI
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
I majored in electronic science and technology for my undergraduate degree and integrated circuit engineering for my postgraduate degree. During this period, my research direction was analog integrated circuit design and application.
Associate professor of Microelectronics at University of Cagliari, Italy
PRODUCTS AND CONSULTING IN AEROSPACE, SEMICONDUCTORS, SAAS, ROBOTIC EQUIPMENTS, COMPUTE SYSTEMS, QUANTUM, TELECOM AND INDUSTRIAL.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
I am a faculty in the department of Electronics and Communication Engineering, National Institute of Technology Arunachal Pradesh, India. Besides, I am associated with the Special Man Power Development Program in the department to undergo research in VLSI. My interests include temperature sensors and SerDes design. I am familiar with Cadence Virtuoso and vigorously monitoring students working in the said areas.
Analog and Mixed signal IC designer
I am a recent graduate who have done his Bachelors of Science in electrical with specialization in electronics.Currently I am doing my masters in IC designing. Mainly my field of research is in analog design,but overall my interest for IC designing is vast and I am eager to learn all the concepts and tools whether they are related to analog or digital.
School of EE, Kookmin Univ., Seoul, Korea master course
A recent Electronic Engineering graduate
Analog-RF IC circuit and system design engineer.
Hello, my name is Usama Ishfaq. I am an electronics engineer with expertise in IC design. With years of experience in the industry, I have developed a strong understanding of the complexities involved in designing and developing integrated circuits. My passion for electronics and technology has driven me to constantly learn and innovate, ensuring that I stay up-to-date with the latest advancements in the field. I take pride in my ability to work collaboratively with teams and clients to deliver high-quality solutions that meet their specific needs. Thank you for taking the time to read my introduction.
Academic leading a research group active in FPGA research and open-source.
Electrical Engineering Student at the University of Notre Dame
A designer, a PhD, Who simply love Circuit design
Junior (3rd Year) Electrical Engineering Undergraduate at the University of Notre Dame and Cornell SUPREME Microelectronics Fellow Previous work experience includes an extensive research background in nanomaterial synthesis and novel semiconductor-based memory devices, and coursework in digital integrated circuit design. Includes over 350 hours of cleanroom experience and proficiency with various analytical and scientific instrumentation and software. Published 1 first-author IEEE conference paper. Co-authored a conference paper accepted to IEDM 2024 and one journal paper submitted to ACS Nano. Club experience includes holding an officer position (Secretary) and Electrical Team Lead in the Robotic Football Club (RFC), with a focus on robotics and hardware engineering. Plays the Tuba with the University of Notre Dame Band of the Fighting Irish at various sporting events and other performances. Holds 4X consecutive Dean's List standings and membership in IEEE HKN and TBP, demonstrating consistent academic excellence.
Electrical Engineering student at the University of Notre Dame
Hi. I am a junior at the University of Notre Dame majoring in computer engineering. I am passionate about the intersection between storytelling and technology. I enjoy the challenges that come with debugging code as well as learning from the experiences of other women in STEM. Besides frequenting Stack Overflow in attempts to make my errors magically disappear, I like to play volleyball, practice Irish Dance, watch the Yankees, wear Chuck Taylors, explain to my friends that the bagels from Jersey are better than the bagels from their home state, and spend time outside with my sister.
University researcher
Computer Engineering Student at the University of Notre Dame who is interested in AI and Chip Design
To obtain a challenging position as a VLSI Engineer in a reputable organization where I can utilize my skills and knowledge to contribute to the growth of the organization while also enhancing my own personal and professional development.
I am a computer engineering student interested in working at the intersection of hardware and software.
Senior Computer Science Student at the University of Notre Dame.
I’m Jennifer Morones, a junior studying Computer Engineering at Notre Dame, and I've always been driven by a curiosity to understand how technology can make a real-world impact, especially in ways that improve people’s lives. Growing up in Bakersfield, California, I developed a fascination with hardware engineering through STEM classes, where I’d spend hours taking apart and assembling circuits on embedded boards. That early curiosity evolved into a deep interest in the design and functionality of complex systems, particularly medical devices and chip technology. As a Mary E. Galvin and Balfour Hesburgh Scholar, I’m fortunate to have had opportunities to put my skills to work through research and mentorship, which have only deepened my passion for these areas. My academic journey has been a mix of exploring digital circuits, machine learning, and bioinformatics, and I’ve found that I love turning data into clear, actionable insights. Whether I’m designing experiments to analyze biological networks or programming a solution in Python, I’m particularly drawn to fields like chip design and embedded systems for medical devices because it is technology that can make a tangible difference in healthcare by making diagnosis or treatment faster, smarter, or more accessible.
UCLA graduate student studying IC Design
I am a professional in the field of Chip Design, Primary working on Synthesis, Physical Design, Static Timing Analysis and Physical Verification
A PhD student working in WEST (Wireless Environmental Sensor Technology) Lab with a focus on Analog IC design.
Power electronics IC designer with in-depth experience in switched-capacitor and hybrid DC-DC converters.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. Hugo is an Analog/Mixed‐signal design engineer with strong background in IC design techniques, industry experience on ASICs for sensoring applications and hands on experience in 28nm, 55nm, 65nm, 130nm, 180nm and 0.35um CMOS process nodes. Research interests include Low power Data Converters, SAR ADCs, DACs, PLLs and Low power analog design.
ASIC architecture, researcher
Computer Engineering Student at the University of Notre Dame
A dedicated Physical Design Engineer aspiring to craft silicon for real-world applications.
I am currently in my junior year studying computer engineering at the University of Notre Dame. Alongside that, I am pursuing a concentration in cybersecurity and a minor in engineering corporate practice. My curiosity was initially drawn to the puzzle-like nature of security problems, which led me to major in Computer Engineering in an effort to dissect both the hardware and software sides of computer systems and expose their vulnerabilities. The more I learned about cybersecurity, the more I realized its criticality in safeguarding individuals and organizations and its ever-growing prominence in our tech-driven world, especially within software development. Throughout my undergraduate career, I have taken on various leadership positions, from acting as the Vice President of my university's Engineers Without Borders chapter to leading development teams at CS For Good. I expect to graduate in May 2025, and I am currently interested in an internship position for the summer of 2024.
CSE Professor at the University of Notre Dame
I am currently in my junior year studying computer engineering at the University of Notre Dame. Alongside that, I am pursuing a concentration in cybersecurity and a minor in engineering corporate practice. My curiosity was initially drawn to the puzzle-like nature of security problems, which led me to major in Computer Engineering in an effort to dissect both the hardware and software sides of computer systems and expose their vulnerabilities. The more I learned about cybersecurity, the more I realized its criticality in safeguarding individuals and organizations and its ever-growing prominence in our tech-driven world, especially within software development. Software engineering complements that passion but adds a layer of creativity and ingenuity that fuels my drive to develop programs and systems that help serve people all over the world. I strive to build solutions that are not only resource-efficient but also sustainable, scalable, and adaptable. Achieving this goal requires a relentless passion for learning about available and emerging technologies – a skill I am proud to have. I am fascinated by the ever-evolving landscape of tech innovation, and it is this fascination that motivates me to delve deeper into the world of technology, continuously seeking out new knowledge and skills to ensure I stay at the forefront of this dynamic industry. Throughout my undergraduate career, I have taken on various leadership positions, from acting as the Vice President of my university's Engineers Without Borders chapter to leading development teams at CS For Good. I expect to graduate in May 2025, and I am currently interested in an internship position for the summer of 2024.
I am a student at the University of Notre Dame, studying Computer Engineering, Engineering Corporate Practice, and Accounting. I seek to combine my technical background alongside dynamic person-focused relationship building to create impact at the intersection of engineering and business.
As a highly motivated and enthusiastic student, I possess strong programming and analytical skills. My passion lies in the fields of VLSI, machine learning, artificial intelligence, and embedded systems, and I am eager to further develop my knowledge and excel in these areas. With a keen attention to detail and a quick learning ability, I am able to grasp complex concepts swiftly and apply them effectively. My problem-solving skills have been honed through various academic projects, where I have demonstrated the ability to identify and overcome challenges with creativity and efficiency. I am now seeking an opportunity to learn and grow in a professional environment, leveraging my skills to contribute to the success of an organization.
I am a master's student studying Integrated Circuit Science and Engineering at Xi'an University of Electronic Science and Technology in China. I aim to enhance my experience in analog integrated circuit design through participation in Google open-source projects.
I am a computer science major at the University of Notre Dame.
Professor at the University of the Philippines Diliman.
I am a Computer Engineer at the University of Notre Dame, with minors in Innovation and Entrepreneurship and Corporate Engineering Practices. I enjoy working with assembly languages and at the circuit level.
Computer Engineering Student at the University of Notre Dame
I am into Analog and Mixed Signal designs. I have been involved in creating ASICs for 30 years.
Computer Engineering Major at the University of Notre Dame
Currently a computer engineering student at the University of Notre Dame
Computer Engineer at the University of Notre Dame
Current Junior at the University of Notre Dame studying Computer Engineering
Computer science student at the University of Notre Dame
ASIC Designer with experience in Back-end & Front-end stages for ASIC design flow.
MSECE student at Ohio State University with focus on Analog & Mixed Signal VLSI circuits
I am a researcher in VLSI domain and Assistant Professor at DIAT India
Fresh Electronics and Computer Engineering graduate from Nile University with magna cum laude distinction. Interested in computer architecture design using AI. Have an experience with digital IC design, data analysis, machine learning, software engineering, and system administration. Currently, working at the NISC research center in Nile University as a part-time research assistant in the field of microarchitecture design.
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
I am working as an asssociate professor in EC departments, at Dharmsinh Desai University, Nadiad, Gujarat. I am working in the field of Analog and Mixed signal Design. I had proposed small size CSDAC in my phd work and now I am working on 16 bit bidirectional data bus to communicate two ICs at different voltages. I want to prepare IC for it.
My research interests include systematic circuit synthesis techniques, modeling and simulation of linear and nonlinear circuits and systems, design and applications of fractional order chaotic oscillators, multi-objective optimization, evolutionary algorithms, and analog and mixed-signal design automation tools.
I am a student pursuing a specialized master's degree in microelectronics, signals, and systems at the Faculty of Sciences of Her Elmehraz in Fès, Morocco.
I do research in the field of mixed-signal IC design in various areas like biomedical, space research and consumer electronics.
I am an Electronics and Communications 2nd year student in Pes University, India.
I am an engineering student in my 3rd year interested in a VLSI career i am still exploring the field and am currently interested in frontend design
I have worked in Texas Instruments for almost 5 years. I am trying out a new software
I graduated with a computer engineering BS/MS from the University of Maryland College park. I now work in industry at a medical device company.
Hao-Yen Tang received his PhD degree from UC Berkeley Advised by Prof. Bernhard E. Boser, his PhD research, PMUT ultrasonic fingerprint sensor, convince InvenSense senior management to make a heavy investment to take this technology to mass market. At InvenSense he’s leading a multi-disciplinary system team for the next generation ultrasonic fingerprint sensor bringup, characterization and calibration, coordinating the works from different field including acoustic, MEMS, CMOS, FW, and SW. Currently, he serves as CTO/Co-Founder in the startup company UltraSense Systems. The company is aiming to transform any surface material into a Touch/Press user interface with it’s proprietary PiezoMEMS-CMOS technology. Dr. Tang is the recipient of 2016 ISSCC Best Paper Award (Lewis Winner Award for Outstanding Paper), 2015 SSCS Pre-Doctoral Award and 2015 ADI Outstanding Student Designer Award. Currently he holds 20+ granted patents, 20+ publications, and 2000+ citations.
vlsi design Researcher, assistant professor
Master's student at UW Seattle ECE
Adjunct Professor and Chief Mentor, Advanced VLSI Lab Silicon University, Bhubaneswar, India
I am a research scholar at IET-DAVV Indore working on " Secure and reliable SRAM memory design for sensitive data protection". I am also a project associate under chip2startup project scheme under MeitY government of India.
I am a research scholar in the Electronics & Communication Engineering department at the Indian Institute of Technology (IIT) Roorkee, Roorkee, India. My research area includes Analog/RF and Mixed signal circuit design, mainly focused on Phase Locked Loops (PLL).
Bachelor of Electronic Engineering, with an interest in technological development and innovation, especially in microelectronics and Analog Design.
A professor in electrical and computer engineering at Ajman University in the UAE.
A passionate individual interested in fusion of energy efficient computation and nanoelectronics along with its integration in conventional technologies and deployment to solve pressing challenges
Digital ASIC designer @ SenCure
I Vaibhav Neema presently working as Assistant Professor at Institute of Engineering and Technology, Devi Ahiya University , Indore , India.
Recent MSEE graduate from ASU specializing in Analog Circuit Design eager to contribute my knowledge and passion for designing innovative circuits. Bringing a solid theoretical foundation and a commitment to excellence. I am eager to contribute to cutting-edge projects.
Founder / director of SLICE Semiconductor, specialising in analog IC design contract services and high performance mixed signal ASIC solutions.
analog and power IC designer. multiple commercial projects experiences.
I am a recent graduate with a Major in Electronics and Telecommunication Engineering and a minor in computer engineering.
I am a doctorate in Electronics Instrumentation and working as head of an Engineering Academic Institution. Fields of interest include Chip Designing.
Electronics and Communication Graduate from Vidyavardhaka College of engineering.
I am a highly skilled and motivated Integrated Circuit (IC) Designer with expertise in both schematic and layout design and verification. Throughout my career, I have played a key role in the development of multiple image sensor Readout Integrated Circuits (ROICs), from initial concept to final production. My key strengths include: • Schematic Design and Verification: I have extensive experience in designing and verifying top-level schematics and novel digital IP blocks for ROICs. I am proficient in using Verilog-A, PWL models, and SPICE netlists for comprehensive validation. • Layout Design and Verification: I possess a strong understanding of physical design principles and a proven track record of owning physical design for complex ROICs, including floor planning, top-level integration, and signoff. I have expertise in 3D IC integration and have developed reusable block-level layouts for various digital and analog IPs. • Design Enablement: I am passionate about creating efficient design flows. I have pioneered an open-source digital design flow and a TSV routing flow, established methodologies for 3D IC validation, and customized Calibre rules for advanced designs. I am a results-oriented individual with a keen eye for detail and a passion for innovation. I am proficient in various EDA tools and PDKs and possess excellent problem-solving and analytical skills. I am eager to contribute my expertise to a team that is developing cutting-edge imaging technologies
Design Verification Engineer with a keen sense of interest in Computer Architecture and RTL Design
I am Taufiq Alif Kurniawan, Assistant Prof. in Department of Electrical Engineering, Universitas Indonesia. My research field is RF/analog IC Design. For full information, please access : http://staff.ui.ac.id/taufiq.alif
Cornell Tech ECE Master of Engineering Grad '24. Interested in startups and easier access to chip design and manufacturing!
Since 2001 I have worked for a small IC Layout design firm located in Wilsonville, Oregon called Coast-to-Coast Layout Design Inc. We provide full-custom mask design services to big semiconductor partners, both digital and analog/mixed-signal. I began my career as a part-time Linux systems administrator, and was taught mask design by my mentor and boss, then over the past couple decades I moved up the ranks to my current GM position where I am responsible for most day-to-day operations and management of multiple mask design teams who are very highly valued by our customers that rely on our services to meet tough tapeout schedule and quality requirements. I'm here because I'm planning to use open-source EDA tools to help train new mask designers to help grow my company.
为生化环材立心，为机械土木立命，为地海农油继绝学，为集成电路开太平。 | Undergraduate student in Electronic Engineering, CUHK (2018-2022) | Ph.D. student in Electronic Engineering, CUHK (2022-2027) | Hong Kong Ph.D. Fellowship Scheme (HKPFS) Awardee in 2022 | Research Interests: Mixed-signal integrated circuit design for data conversion
As a VLSI enthusiast, I completed a 6-month internship as a NAND product engineer at Micron Technology where my work comprises of post-silicon validation, data analysis using JMP, and testing NAND components under varying PVT conditions in DDR3 and LPDDR4. I'm passionate about CMOS and have experience simulating NAND output drivers through HSPICE simulations in collaboration with the design team. Additionally, I have proficiency in System Verilog, RTL design, and a solid grasp of digital IC, analog IC, and physical design. I hold a master's degree in Microelectronics from BITS Hyderabad and a bachelor's degree in ECE from Gayatri Vidya Parishad. I achieved a GATE ECE score of 571 with an All India Rank (AIR) of 1404 in 2023. devadeepreddi20@gmail.com
I am interested in reserach and projects on IC Design, Neuromorphic Computing and Digital Design
Linkedin page: https://www.linkedin.com/in/yaqub-mahnashi-4a988647/
Greetings! I, Devang Sharma am a B.Tech final year student studying at Jaypee Institute, Noida. I am a VLSI-enthusiast and posses moderate to advanced-level skillset(at B.Tech level). I have studied about ASIC Design Flow and learnt several HDLs(Verilog, SV, UVM).
I am a Professor at BITS Pilani. I teach courses on VLSI Design, Semiconductor device and process and Analog Design. My area of research includes neuromorphic computing, embedded memories and biosensors.
