Efabless Logo

Tag Search

"profiles" search for "skills": ic

Number of Results: 1017

Krzysztof Herman

Academic teacher at the University of the Bio Bio, Chile

Guilherme Henrique Contel Anzulim

I`m electrical engineer.

Skills

C/C++ Magic CAD

Area of Expertise

Business: Design Services

Wonyoung Kim

CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.

Takehisa Konda

semi retired, small startup for Medical (oncology/treatment) system, analog circuit designer, College Lecturer, Surfer&moto Rider.

Jorge Scandaliaris

Teacher/researcher at the Electronics Department (DEEC) of Universidad Nacional de Tucumán, Argentina

Fernando Leon

Electronics Engineer student at Benemerita Universidad Autonoma de Puebla

Area of Expertise

Academic: Student

Shah Sharif

I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.

Hiroshi Heinai

I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.

Onur Ates

Tapeout Engineer and Electronic Lover.

Syed Arsalan Jawed

I have been working on Analog/Mixed-Signal Integrated Circuits design since last 16 years. I graduated from NED UET, Karachi in 2001 and then worked with Avaz Networks, a Silicon-Valley Company on RTL design and verification of a high-density Line Echo Cancellation Engine for a couple of years. Joined Linkoping University, Sweden in 2003 for Masters in SOC, which concluded with a Masters Thesis on Sigma-Delta Modulators with Fraunhofer Institute of Integrated Circuits, Germany in 2005. The same year I joined University of Trento and Fondazione Bruno Kessler, Trento, Italy for my PhD on Readout Interface Design for MEMS Capacitive Microphones. Worked with ST-Microelectronics, Milano and Analog-Devices, Copenhagen as a Guest PhD Student. This Phd results in 20+ publications and 2 patents with 3 successful MEMS Readout ASICs.

Rishi B. Raghav

I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.

Mohamed Khairy Bahry

I have more than five years’ experience in electronics integrated circuits industry. I have been involved in more than six silicon runs which were all successful and meeting expectations.

Alfredo Roskamp Coelho

I am a experienced analog and mixed-signal circuits designer, using standard and/or custom circuits ( external IPs or from my own design ).

Alex Sheldon

Electrical Engineering PhD Student focusing on low noise analog and RF circuits

Jeff DiCorpo

I'm a staff member at efabless responsible for product management, business development, strategy, partnerships.

Istvan Kovacs

Analog IC design engineer with expertise in designing analog building blocks variable gain amplifiers, active filters, frequency synthesizer (integer-N PLLs), voltage regulators.

Youcef

Designer

Area of Expertise

Analog IC Design

Matthew Ernest

VLSI circuit design engineer with significant experience in microprocessor design in semiconductor processes from 65nm to 10nm. Provided register file designs and design training for Intel Big Core and SOC projects. Helped create semi-automated array layout methodology. Established cross-organizational methodology for variation analysis in register files. Converged memory IP handling across multiple organizations.

Aishwarya Lakshminarayanan

Analog IC design enthusiast, based in Frankfurt, Germany.

Rama Kotapally

I have 20 years of experience in Circuit Design, Physical Design, RTL.

Jay

In love with electronics since 1997.

Sun

Engineer, who typically worked in start up environment. So do A-Z, a-z and 1 - infinity if something has to work

James Mann

I am a full custom analog and mixed-signal IC design consultant. I have been consulting for over 22 years following 12 years as a staff member at MIT Lincoln Laboratory.

Walaa Ashraf Ayoub

Electronic Engineer, CAD Engineer & Software QA Engineer

Mohamed Kassem

We are building a community of OSHW Product Creators. Our focused mission is to simplify the process of smart product creation and making it available to everyone. We believe in Open Source Hardware as the foundation for addressing the massive and divergent forms and features of the new connected world.

Stepan Sutula

I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.

Ankit K V

Electronics Freak !

Area of Expertise

Digital-RTL

Mohamed Gamal Shouman

Working as a instruments engineer, and currently working on my masters of Microelectronic Systems Design. Passionate about designing analog/mixed signal IC's and systems

Abdelkrim Bessaad

I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.

Mark Whittaker

Analog/RF IC designer

Area of Expertise

Analog IC Design

Amit Bansal

An experienced analog design professional

ALOK MITTAL

Analog full custom design experience of Low power VOltage regulators, Bandgap reference, calibration circuits and common mode receiver. worked on SERDES IP (up to 12Gbps) compliant with USB 3.1 and SATA protocols. AS ESD ENgineer for SERDES IP Improved existing ESD network simulation strategy and ESD network for robust ESD performance reliability and automated existing current density flow for ESD for better efficiency. Technology Nodes: 14nm(FINFet), 28nm(FDSOI) 28 nm,40nm,90nm,180nm (Bulk)

Aloka

I am Layout Design Engineer having experience of 9+ years on SRAM layouts.

thong ton

Engineer

Area of Expertise

Analog IC Design

Marius Voicu

I am an EMC Specialist working at Renault and currently looking to fill my free time with interesting projects (Hardware, EMC, Design, Simulation)

Shriniket Sawant

Recent college graduate from San Jose State University with Masters in Electrical Engineering degree. Specialization - Digital Design and Verification.

REF

Power IC designer for 27 years primarily in Silicon Valley.

Area of Expertise

Analog IC Design

Sherif Eid

I like to make boards and other cool electronics

Skills

C/C++ Python kicad

Area of Expertise

Analog System-PCB

Yang Fu-Chang

I am a RD designer focus on power management ic design. I have about ten years working experience. Hope I can do something for this great platform ~ !

Area of Expertise

Analog IC Design

Ahmed Mahmoud

Experienced Analog/RF integrated circuit design

Deep Kalola

Physical Design Engineer, 5 Years of experience and always fascinate about learning new concepts. Open to understand & take participate in Open Source.

Manu Mk

Exploring yourself in Physical design it's just like exploring yourself in creating a Brain .

Mustafa Tosun

I am a digital design/verification engineer. I have 2 years of full-time industry experience. In total, I have 4.5 years of experience in RTL design, Electronic Design Automation and Verification using VHDL/Verilog, Perl, Tcl and Linux. I was the #1 graduate of Bahcesehir University in Mechatronics Engineering in 2013

Vinod Kumar G

I'm a DFT Engineer, i would like explore the world of semiconductor technology

Area of Expertise

Digital-DFT

Hardik Manocha

Intern with Synopsys VIP Group, Working on HDMI VIP Development

Deepak Siddharth Parthipan

I am Digital/SoC Design and Verification enthusiast.

Ronobir Das

BSEE graduating senior with a focus in digital design. I have taken coursework in Analog, Digital, Mixed Signal and RF IC design, and have experience using Cadence's tool suite as well as NI's AWR. I have also done multiple EDA centric courses in validation, formal and functional verification and Digital IC Testing

Srikantan

I work as an AE in Cadence. I am willing to learn new things and try and incorporate the same at my workplace

Mario Vigliar

Mad about OSS system design, specialized in video compression and image processing, CNN and dedicated HPC architectures. New deals in low power design

Kevin André Castillo Andrade

Electrical Engineer student

Area of Expertise

Analog

Luis Enrique Rodriguez Mecca

Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.

Daniel Minor

Longtime innovator in analog and mixed signal design. US Patents US2773120A and US2560234A.

Area of Expertise

Analog: Design

sudipta satpati

electrical graduate student

Skills

ASIC

Area of Expertise

Academic: Student

MBreithaupt

Electrical engineer, who likes to figure out new stuff

Saravanan Nanthakumar

I am a Master Degree holder in VLSI Design. I am interested in Analog Circuit Design.

Kim Cornett

MSEE, Instructor (teaching undergraduate electrical and general engineering coursework including Introduction to Integrated Circuit Design, mentoring for local Society of Women Engineers chapter)

Skills

Electric CAD

Area of Expertise

Academic: Teaching

KARIM

ASIC Designer

Area of Expertise

Digital: RTL

Ernesto Conde

Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,

kartik dev pujari

i have done PGDMA in ASIC Design in physical design domain , from RV-VLSI Bangalore.

Area of Expertise

PNR

Tom Darbonne

Skills

Magic CAD

Area of Expertise

Academic: Research

Milind Gupta

I am an Analog IC Designer by profession. I have loved and done circuit design from my high school days in India. I love developing new challenging circuits and seeing them work in real applications.

Angel Abusleme

Associate professor at Pontificia Universidad Catolica de Chile, analog and mixed-signal design

Martin Simlastik

digital ASIC designer with 10+ yrs experience

Arun Kumar V

4+ years of VLSI Backend experience. Working as Physical Design Engineer. Expertise in Analog layouts, physical verification and Physical Design. Open to learn and explore other domains of VLSI design.

Thomas Dye

Area of Expertise

Analog: Design

JBU IC Design Group 1

Students in Introduction to IC Design Course working on an Encryption design for a class project

Area of Expertise

Academic: Student

Sunjaya

Skills

Electric CAD

Area of Expertise

Academic: Research

Ruben Undheim

Skills

Electric CAD

Area of Expertise

Microwave Digital

Hunter Scott

Skills

Electric CAD

Area of Expertise

System: PCB

Saul Rodriguez

I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.

Alfonso Chacon-Rodriguez

Professor in Electronics Engineering with a PhD. in VLSI (Universidad Nacional de Mar del Plata). Expertise in digital RTL and physical design. Experience in FPGA RTL and HLS design for heterogeneous computing. Knowledge in sub-threshold analog design. Fiction writer (National Literature Award for Novel, 2011, Costa Rica)

Phillip Allen

Professor Emeritus from Georgia Institute of Technology. Developer and lecturer on analog integrated circuit design.

Marwan Mohamed

I am a senior Electronics and Communications Engineering student at the Faculty of Engineering, Ain Shams University, Cairo, Egypt. I have wide knowledge and some experience in analog electronics with huge passion towards it

Murat Eskiyerli

I am an experienced semiconductor expert with twenty years of experience both in top semiconductor companies such as Sony, National Semiconductor, Analog Devices, and Cambridge Silicon Radio and much smaller companies such as Pericom and Theta Microelectronics. I designed high-volume products for customers including Quantum, Western Digital, Hewlett-Packard and Nokia. I also acted as an expert evaluator for European Union H2020 framework project calls and EURIPIDES research frameworks. Specialities: CMOS/BiCMOS, SOI CMOS analogue and radio-frequency integrated circuit design: Millimetre-wave phase shifters, vector modulators, attenuators, Phased-array transceivers, LNA (Bluetooth, FM, 802.11n) Mixer (100MHz to 4GHz) Limiting Amplifiers for optical communication circuits, Transimpedance Amplifiers, Low-power RF Amplifiers Hard-disk preamplifiers, Clock and Data Recovery (CDR) circuits, High-speed output drivers (CML), Sigma-delta converters. Xtal Oscillators, Ultra-low power CMOS circuits for RFID transponders CMOS RF-DC Energy Harvesting circuits

Hervé Pierre

Research engineer and teaching assistant in microelectronic, microsystems and bioelectronic at the university of Liège, Belgium

Ioannis Kymissis

I'm a faculty member at Columbia University in Electrical Engineering.

Shahbaz Abbasi

Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.

Michael Spruill

Skills

Electric CAD

Area of Expertise

Analog: Design

Miguel Ramirez Fuentes

Self-taught Electronic Engineer with a lot of experience in programming. I consider myself creative, analytical and dynamic, through my studies I have developed the ability to face and lead changes; I am interested and committed to continuous improvement in a globalized world, both professionally and personally. Being able to contribute what I have learned and add value, thus learning from the opportunities in today's working world.

Daniel Limbrick

I am currently an Associate Professor in the Electrical and Computer Engineering Department at North Carolina Agricultural and Technical State University (NC A&T). As director of the Automated Design for Emerging Process Technologies (ADEPT) laboratory at NC A&T, I research the following questions: (1) how can we make computers more reliable in harsh environments (i.e., ionizing particles, malicious fault injection) and (2) how can we extend Moore’s law (e.g., 3D IC)? To answer these questions, he interrogates the traditional abstraction layers of integrated circuit design (i.e., functional description, circuit design, physical design) to discover design methodologies that are more relevant to these goals.

Mircea R. Stan

Virginia Microelectronics Consortium (VMEC) Professor in the ECE Department at the University of Virginia

Konrad Rzeszutek Wilk

I am enthuastic engineer who has been doing software engineering (Linux kernel), electronics, and now chip designs. My day job is leading teams (senior director) focusing on virtualization and security.

天瑞 郑

Skills

Electric CAD

Area of Expertise

Academic: Student

SHIVDEEP _

Research Scholar | Analog Circuits | EMI Immune Amplifiers | Neuromorphic Circuits

James Stine

Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group

Aled Cuda

I'm a physics major studying at UC Berkeley interested in accelerating research and computational workloads with modern VLSI and FPGA tech.

Paulo Marcio Moreira e Silva

Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.

Sanjitha Kurugunta

I am Physical Designe Engineer -1 at Signoff Semiconductors

Bo Feng

Analog IC designer

Nishit Nathwani

I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/

Tayyeb Mahmood

Motor control group at EE, UET strives to develop technologies in the domain of DC motor control, closed loop (PID) servo control, 3-phase AC (PMSM, ACIM) FOC control, targeting home appliances, industrial, robotic and EV applications.

B Mallu

Skills

ICC2

Area of Expertise

Digital: Placement and Routing

Peter Gu

Area of Expertise

Academic: Student

Renaud GILLON

Electrical engineer with PhD in micro-electronics, and more than 23 years experience in the automotive industry. Specialized in the development of CAD tools to support mixed-signal and smart-power IC design. Founder of SYDELITY b.v. a start-up company offering services and products accellerating system-level simulations.

Afolabi

Skills

IC Design

Area of Expertise

Academic: Research

Pablo Alejandro Ferreyra

Researcher and Professor at the National University of Córdoba, Argentina. Actual Research areas: microelectronics, embedded systems, Digital Signal Processing

Amro Tork

More than 14 years of experience in Electronic Design Automation roles with leading industry companies like Intel, Samsung and others. Have a strong background in EDA best practices and technologies like DRC, LVS, XRC, PERC and others. Have a mixed background in circuit. design, data science and programming with emphasis on data analysis for microchip design. Have strong background leading project deliveries to fortune 100 companies in the world. B.Sc. in Electrical Engineering from faculty of Engineering, Ain Shams University, Cairo, Egypt.

Pranav Mathews

Electrical Engineering PhD student at Georgia Tech

Muhammad Aseer Khan

I am a PhD student and faculty member in Electrical Engineering Department at Air University Islamabad Kamra Campus.

Parker Hardy

Graduate research assistant at the University of Mississippi

2K18/EC/103 MOHD PARVEZ KHAN

myself Mohd Parvez Khan, I am pursuing btech from dtu in ECE.I have keen interest in VLSI and Digital domain.

Ted Sun

I am a Professor in Electrical Engineering in ITU.

Ulises Malagon Reyes

RF Engineer looking for more skills.

Aastha Dave

Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.

Uri Shaked

Maker, working on Wokwi.com

Area of Expertise

System: PCB

Rana Muhammad Shahid Jamil

An aspiring Analog/RF IC designer aiming to make a difference through existing knowledge and innovative ideas.

Andrew Jones

My name is Andrew Jones and I recently graduated from Erie Community college with a certificate in the mechatronics field.

Skills

Electric CAD

Area of Expertise

Circuits: Sensors

Kranthi Kumar Pamarthi

I am passionate about all areas of VLSI Design and trying my level best to be an expert in the entire flow, analog, digital and mixed signal. Beyond chips, I like poetry, skating, skydiving, late night swimming and trekking in no particular order.

Dillip Kumar Sahoo

I’m a research student at Odisha University of Technology and Research working for better understanding of Low Power Electronics Circuit . My research and career interests lie in the Application specific Integrated circuits and Analog Mixed Signal with expertise in circuit design and programming. With a board skill set covering the important facts in the semiconductor industries, I am looking for exciting opportunities in the same. I enjoy generating new ideas and devising feasible solutions to broadly relevant problems. My colleagues would describe me as a driven, resourceful individual who maintains a positive, proactive attitude when faced with adversity. Currently, I’m seeking opportunities that will allow me to develop and promote technologies that benefit human society.

Venkata Ramanan

Experienced PCB/Package Layout Engineer with an extensive experience in EDA automation using SKILL python powerscript

Area of Expertise

Board Level

Damjan Mustur

I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++

Ashraf Mohamed

Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.

Waleed Al-Shaikhli

Skills

RF RFIC

Area of Expertise

Analog: Design

Brendan Ford

A senior year electrical engineering student with expeirence doing IC layput for Mixed signal analog circuits such as DSA, RF Switches, Power switches, and logic blocks.

Tarush Singh

I am a VLSI enthusiast looking for an opportunity to make my career as a Design engineer in the Hardware Industry.

Jared Marchant

Ph.D Student studying analog/mixed-signal VLSI at Brigham Young University

Rameen Anwar

I am Physical Design Engineer at MERL

Area of Expertise

Academic: Research

YERRA BHASKARA VARA PRASAD

My name is "YERRA BHASKARA VARA PRASAD" pursuing B.tech ECE 3rd year in Rajiv Gandhi University of Technologies, Nuzvid, Andhra Pradesh 521201.

Robin Tsang

ADC designer starting a company

R.Thanga Gnana Jenef

Actively Looking to work in a Semiconductor Organisation.I'm undergoing Masters in VLSI. I am Passionate about VLSI and semiconductors.He recently completed the 6-months training in Back-end VLSI at Entuple Technologies. And in addition to that specifically trained in STA, Synthesis and Physical Design by employing Cadence Tools. He is interested in and currently working on Open-Source tools related to VLSI (Openlane)

NIMMAKAYALA SUMANTH GOURI MANJUNADH

I would like to think I am a safety-focused, results-driven, and professional Electronics & Communication Engineer and M Tech in Electronics & Communication Engineering with specialization in VLSI Design, who can be relied upon to carry out my tasks competently within strict rules and procedures in a fast and efficient manner.

Mark Bickerstaff

https://au.linkedin.com/in/markbickerstaff

Muddukrishna Y

Currently I am student in NIE college Mysore. I am passionate about vlsi design

Namani Kavya

Skills

C/C++ ngspice

Area of Expertise

Academic: Student

Javier Contreras

Electrical Engineering senior student at the PUC Chile

Andreas G. Andreou

Professor of Electrical and Computer Engineering at Johns Hopkins University

Vani chervirala

i am a tech enthusiastic i love exploring new circuits by designing them want to learn about this

牛 光頭

Skills

Electric CAD

Area of Expertise

Academic: Student

ilika mitra

electronics enthusiast

Nate Cermak

Neuroengineer

Area of Expertise

System: Test Equipment

Adan Kvitschal

I work with embedded systems, analog electronics and general physics research. I founded a small engineering services company in Brazil, currently working with a team of 3 engineers to create products and help companies on their way to to production.

Thomas Coradetti

Engineer: Electronics, Software, Firmware, Applications, PCBs, Chips. Business owner, consultant.

Charaan Suresh Kumar

Passionate about Digital VLSI and Hardware Accelerators. Experienced in using open-sourced tools for design and verification

Carlos German Carreño Romano

I'm currently working as an Optics Design Engineer for Biotech applications. My main interests are (Micro/Opto)Electronics, Optics and Photonics, Data Science and Embedded Systems.

João Vitor Testi Ferreira

Electronic Engineer from the Federal University of Santa Catarina (Brazil). Master in Electrical Engineering from UFSC (thesis title: CMOS Ultra-Low-Voltage Ring Oscillators). Interested in the areas of Sensors, Ultra-Low Power Circuits and MOS modeling.

Beyza KARARTI

Hey! My name is Beyza and I'm an Electrical & Electronical Engineering student in Turkey. My aim is to bring together the knowledge I've gained about science and technology with other people. The more we learn and the more we develop, the better a mark we leave in the world of science. I'm constantly improving myself for a better future, and I am trying to gain as much information as possible.

Anuj Kumar Jha

I am Anuj Kumar Jha and pursuing MTech at IIIT Bangalore in VLSI

george lewicki

retired engineer

Skills

C/C++ ngspice

Area of Expertise

Circuits: Signal Processing

Arthur Scott

Earth ICT, SPC Founder & CEO

Area of Expertise

Truly Fully Adiabatic

Md. Tasfiq Rahman

I am a sophomore BSc student. My major is EEE. I am studying at Bangladesh University of Engineering Technology. I want to use my academic skill to contribute to the fundamental field of particle physics.

Area of Expertise

Academic: Student

Siddhant Nayak

Skills

VLSI ASIC

Area of Expertise

VLSI

Pushpanjali Chauhan

I am a Graduate student pursuing my master's in Computer Engineering. I am interested in VLSI projects.

Pier Francesco Maria Santi

I'm a Senior Electronic Engineer passionate with ASIC & FPGA

ADITYA SINGH

M.Tech. in VLSI DESIGN

Area of Expertise

Academic: Student

Mahaboobbatcha Aleem

I'm a postdoctoral researcher focusing on the development of a high-sensitivity MEMS/NEMS-based sensor device for gas and biosensor applications. For device fabrication, I have experience with lithography techniques such as E-beam, mask/mask-less UV, and imprint for solar cell and sensor applications. I have extensive clean room (Class 10,000, 1,000, and 100) expertise with PVD, ICP-CVD/RIE, and lithography-based tools, as well as a strong instrumentation background. My doctoral focused on Advanced Micro-Patterned, Narrow Finger Width Front Contact Metallization Schemes for Silicon Solar Cells. I have extensive experience in the fabrication and characterization of silicon and thin-film solar cells, as well as in-house tool development. I designed and built four pilot scale machines. As an interdisciplinary researcher, I've also worked on the development of chemi-resistive type gas sensor devices based on metal oxides, thin films, and other materials. Defect engineered metal oxides and their surface structural improvements in surface reactive sensing platforms for flexible, temperature-independent, and low-power MEMS gas sensors were the focus of the research.

Ryan Wans

Rf engineer and mmWave researcher

Area of Expertise

Academic: Research

Shuchirath Gowda. R

I am extremely dedicated individual looking for an opportunity to learn and explore new ways to implement the latest technology. My dream is to join a core company and work on on-site projects. I believe my skills and hunger to learn will turn me into an important asset to the company. Thank you

CJG-2

Skills

ngspice

Area of Expertise

Business: Design Services

Ramiro Javier Rossi

Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.

RECEP GÜNAY

Received B.S. degree from Electrical and Electronics Engineering in Middle East Technical University, Turkey, in 2019. Currently, pursuing M.S. degree from Electronics Engineering in Bogazici University, Turkey. Research interests are computer architecture, hardware security and secure memory architecture

Milad Diba

Analog IC design engineer with background in sensor Front-End design and semiconductor radiation detectors.

Nigel John Coburn

Sensor Design Engineer @ Google LLC

Area of Expertise

Academic: Research

Art Scott

Founder and CEO of Earth ICT, SPC NAICS 334413; Semiconductor and Related Device Manufacturing Incorporation Date: 08/03/2021 Corporation ID: C4773876 1-650-996-7232 art@earthictspc.com Biography: Dauntless Entrepreneurial Risk-taker; Invited expert, ITU-T ICT Sector L.TIME (The IC Metric for Energy-efficiency, Quality-Factor) Recommendation. “Art is many faceted; he creates outside the box; he is a serial entrepreneur-intrapreneur and change agent, and is flexible-adaptable-situational. He has worked for Silicon Valley icons such as SRI, Applicon, Computer Sciences Corporation, Informatics, Atari R&D, Interactive Research Corp., Samsung Information Systems America. And he has participated in several startups: Digital Video Inc. (1985–2001), Ravisent Technologies (1998–1999)” [source: ”Sustainable computing - ACM ]

Rahul Sharma

Interested in Analog IC and RFIC Design.

Nathan Weir

Skills

Mechanic

Area of Expertise

diesel

Christian Topcu

NRW

Skills

Electric CAD

Area of Expertise

Analog: Modeling

ruud bouten

CTO admesy

Skills

Electric CAD

Area of Expertise

Circuits: Sensors

Deepak verma

I am a student pursuing MS(R) in Integrated circuits in Electrical Department IIT Delhi.

Benjamin Yeffeth

Computer Engineering Student and hardware design enthusiast. Enjoys programming and soldering.

Paras Vekariya

I am a student at IIIT Bangalore pursuing Integrated Mtech in Electronica and Communications Engineering and am fascinated about silicon wafers and want to pursue a career and build a revolution in this domain.

LIJO LUKOSE

Analog design engineer with 3+ years of experience in the analog/ mixed signal design, verification and lab validation.

Julio Vargas Riano

I am interested in Robotics and Bioengineering. A holistic approach can lead to developing optimal systems. The co-design of cyber-physical systems must take into account the biological and mechanical models, hardware, and software. I search for the application of mathematical representation of models by algebraic geometry, topology, and energy fields. The study of mathematical concepts can lead to hardware and software design that solve complex dynamical systems.

Subhojit Basu

Electronics Engineer. Design Embedded Systems , Firmware professionally and fiddle with others :)

Gopala Krishna Reddy Sanampudi

Student at international institute of information technology, Bangalore.

Area of Expertise

Academic: Student

Collin Stoner

I am an Electrical and Computer Engineer. I run an engineering, design and manufacturing firm in Milpitas, CA. We design and manufacture various electronic products, including image sensors and image processing compute hardware.

Alexander Shabarshin

Professional Software Developer and Electronics Hobbyist

Ignacio Herrera

I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.

Belal Ali

fresh. grad electronics and communication engineering minia university advanced analog CMOS circuit design

Kamala Jayaraman

Kamala J. received her B.E. degree in Electronics and Communication Engineering from Madurai Kamaraj University in 1989, M.E. degree in VLSI Design from Bharathidasan University, in 2002 and Ph.D from Anna University, Chennai, Tamil Nadu, India in 2011. She is currently working as Associate Professor in the Department of Electronics and Communication Engineering, Anna University, Chennai, India.

Ajaykumar

Skills

VLSI ASIC

Area of Expertise

Academic: Student

David Zheng

College student

Skills

Magic CAD

Area of Expertise

Academic: Student

Md Sakib Hasan

Assistant Professor in the Department of Electrical and Computer Engineering at The University of Mississippi

Bharti Poddar

currently pursuing M.tech in VLSI design from Visveswaraya National Institute of Technology, Nagpur, India

Area of Expertise

Academic: Student

Rishabh Verma

Looking for an internship opportunity in VLSI or the semiconductor industry. Hey, Welcome to my page I'm Rishabh Verma, a pre-final ECE undergrad, who has a keen interest in the VLSI domain. I love to design and simulate circuits. Till now I have participated in two circuit design hackathons. One of them was "Mixed-signal Circuit Design and Simulation Marathon Using eSim" organized by FOSSEE Team IIT Bombay, in which my design was ranked under the "Outstanding" category with a cash prize of INR 10,000. I have hands-on experience with the simulation tools like Synopsys Custom Compiler, eSim, Vivado, Pspice, and LTspice. I have also done layout designing and parasitic extraction of some basic logic functions using the ELECTRIC VLSI system design tool. Done DRC and LVS. I'm also familiar with the FPGA flow. In my 3rd year, I have done the implementation of a Robotic Arm controller using the FPGA. Verilog HDL was used to code the algorithm. Currently, I'm working on the " AQI estimation " using Image processing on FPGA. You can check my projects on my Github, the link is provided in my resume or in the website section of my profile. Feel free! to reach out to me if you are doing some cool stuff on FPGA or something related to VLSI and Circuit design.

Prajwal Matukumalli

college students, interested in project works for vlsi and memory design

Area of Expertise

Academic: Student

Hicret Erkoç

I am an Electronics Engineering student interested in IC design.

Yashwanth Kumar Resham

PURSUING VLSI AT IIT BOMBAY

MOHAMMAD AMEED SHAH

I am working as Assistant Professor in Electronics and Telecommunication department, Government College of Engineering Amravati M.S (India)

Skills

ngspice

Area of Expertise

Academic: Teaching

helmy yossif

I have an expert in the PCB design area. I am interested for analog design and chip design

Donel Anto

Interested in Analog IC Design

Area of Expertise

Analog IC Design

Brett Meadows

Electrical Engineer

Yash

Area of Expertise

Academic: Student

Joseph Cavallaro

Professor of Electrical and Computer Engineering at Rice University

Belal Iqbal

I am Ph.D Scholar at IIITD , my research area is In memory computation.

Muhammad Dawood Asghar

MS Electrical Engineering Fellow with a focus on Integrated Circuits and Systems Design. Skilled in Cadence (Virtuoso, Innovus and Genus)

Nizar Bo

CTO at Smartware Pte Ltd

Dr D Gracia Nirmala Rani , Associate Professor, Thiagarajar College of Engineering

D Gracia Nirmala Rani received the B.E. degree in Electronics and Communication Engineering from Syed Ammal Engg College, Madurai, India, in 2004, and M.E. degree in VLSI Design from Karunya University, Coimbatore, India in 2007. She has awarded Ph.D. degree in VLSI Design from Anna University, Chennai India in 2014. She is working as an Associate Professor in Thiagarajar College of Engineering, Madurai since 2007. She teaches courses on system/digital and analog electronic design and VLSI processor architectures. Currently, five research scholars are doing their research under her guidance. She has authored or co-authored 42 international journal and conference papers like IET Circuits, Systems and Devices, Spinger, Wiley and Elsevier Publications. Also she has published 3 Books/Book Chapter in Springer LNCS and CCIS Publications. She has filed 2 Patent in BioMedical Engineering Field. She has guided the B.E students’ project which won the India Cadence Design Contest Award 2017 and 2018 instituted by Cadence Design System Pvt Ltd, Bangalore. In 2018, she was the technical program chair of the 22nd International Symposium on VLSI Design and Test. She is serving as a reviewer in IEEE Transaction on Nanotechnology, Elsevier and Inderscience Journals, respectively. Her research interests include RFIC Design, Physical Design Automation, Optimization Algorithms using Machine learning for IC and mixed signal circuits and systems for Bio-medical Devices.

Mariam Rakka

I am a PhD student in Electrical and Computer Engineering at the University of California, Irvine.

Yashas L.R

Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University

Usama Liaqat

Trying never to sit back and enjoy but to come forward and prove myself

Talha Bin Azmat

I am en Electronics Engineer currently Pursuing my Masters in IC design from FAST NUCES Islamabad.

Dr. Naushad Alam

I am Dr. Naushad Alam working as an Associate Professor in the Department of Electronics Engineering, Z H College of Engineering & Technology, Aligarh Muslim University, Aligarh, India. I received B. Tech. degree in Electronics & Communication Engineering from Jamia Millia Islamia, New Delhi in 2003, and M. Tech. Degree in Electronic Circuits & Systems Design from Aligarh Muslim University, Aligarh in 2009. I earned Ph.D. degree in Microelectronics from Indian Institute of Technology Roorkee, India in 2013. My doctoral work was on nanoscale circuit design considering the impact of process-induced mechanical stress. He has published 29 papers in SCI indexed journals that include 10 IEEE Transactions and 33 papers in reputed conferences. I have supervised two PhD thesis in the area of device-circuit co-design and presently supervising two more PhD students. I have also successfully executed a UGC funded research project on TFET based SRAM cell design for IoT Applications. My research interests include device-circuit co-design, robust nanoscale circuit design, low power circuit design, PVT tolerant circuit design, Near-Threshold/Sub-Threshold circuit design etc.

Zhiyang Ong

Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.

Mohd Hasan

I have been working as a Full Professor in Electronics Engineering Department, AMU, Aligarh.

shivdeep singh

Research Scholar at Department of Electrical Engineering, Indian Institute of Technology Ropar, India. Current research area is EMI Immune Amplifiers. Previous works include a Memristive adaptable ramp generator circuit for a on-chip training signal generator for trainable DAC, Modeling and hardware implementation of digital image watermarking algorithms.

Santunu Sarangi

An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.

Bertrand PIGEARD

Hello, I'm an IC Designer Analog/RF with digital skills. I worked mainly on PLL for mobile tranceivers. I used to work on Cadence Design flow for 20 years.

Yurii Yakubovskyi

My current position is PCB layout engineer but I want to get experience and switch to IC analog layout.

PCTO CANOVA

Skills

Electric CAD

Area of Expertise

Academic: Student

Mark Martin

Principal Staff Engineer, ASIC Design and Development, Chief Technologist, JHU/APL Space Exploration Sector, Electronic Systems Engineering group

Alok Parmar

Skills

ASIC FPGA SOC Verilog

Area of Expertise

VLSI

Lucas Heraldo Duarte

Engineering Electronic student of National University of Cordoba (UNC), Argentina. Active member of Robust Circuits and Systems Laboratory (LCSR), in exact and natural sciences faculty (FCEFyN).

Soorya K

Teaching Profesional

Tomas Choi

Skills

ngspice

Area of Expertise

Academic: Student

Blanche Yang

Skills

Matlab pspice

Area of Expertise

Academic: Student

Shivam Potdar

RISC-V Enthusiast GSoC 2020 @ FOSSi Foundation RA @ CAD Lab, IISc Bengaluru, India EE Senior @ NITK Mangalore, India

Akil M

Undergraduate Student at NIT-Trichy

Ankit wahane

pursuing pg in vlsi system design from vnit

Area of Expertise

Academic: Student

Francisco Brito Filho

Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.

Prachi Mrudula

Be the someone among everyone who pioneers everyone to be a someone !

David Wentzloff

Professor at UM Co-founder of Everactive BoD member at Movellus

Skills

RFIC

Area of Expertise

RFIC

Pavan Kumar Kori

current I am doing postgraduation in a Micro and Nanoelectronics

TAKASU Masakazu

TAKASU Masakazu, Support Maker Faire Shenzhen and Singapore Maker carnival Shanghai and some event, takes us on a journey to his homeland of Japan and their exciting ways of using technology, design and science. He is the most experienced person of Maker Faire in Asia, now based in Shenzhen. He is also connected all around Makers, even in Asia and Japan.His company Switch Science is the most famous maker tool platform in Japan, and also DIY Indie product marketplace. Japanese DIY product grown so rapidly 20 percent per year. His Own book ECOSYSTEM BY MAKERS is well known in Japan, and He also translated 'the Hardware Hacker` book in Japanese and published. That book by Bunnie Huang, who is a world famous Hardware hacker. https://www.linkedin.com/in/takasumasakazu

Charles Glasser

I am a EE with decades of experience in multiple disciples including analog, RF, bio-engineering, embedded systems design, ... a long list. I've had a long career and am fortunate to be able to follow my interest where ever they might be.

Mohit R

Graduate equipped with a Bachelor of Engineering in Electronics and communication with a concentration in Semiconductor and VLSI design with hands-on experience in CAD tools and to join a reputable organization to begin a fulfilling, lifelong career.

Andrew Selasi Agbemenu

Lecturer at the Department of Computer Engineering, Kwame Nkrumah University of Science and Technology, KNUST. My primary interest is in analog and mixed-signal design.

Madhu Siddalingaiah

Artificial Intelligence/Machine Learning • Big Data • Internet of Things • Product Development

Pratika Tripathi

I am Pratika Tripathi. I am in my final year of Btech. I am very interested in physical designing of IC. I had even taken 3 courses of kunal ghosh sir on physical design, stay, and cts. I am doing my final year project in physical design.

Steven Bibyk

Associate Professor in Electrical and Computer Engr. Dept. Teaching and Research in Microelectronics. Teaching interests are in both discrete and integrated electronics, both for undergraduate electronics labs and projects and graduate integrated circuit design, verification, prototype, and test.

MY IC

Skills

SPICE Opus

Area of Expertise

Analog: Design

Franco Nicolás Mainero

I am an electronic engineering student about to graduate from Facultad de Ciencias Exactas, Físicas y Naturales in the Universidad Nacional de Córdoba, Argentina. As part of the supervised professional practices I'm working on analog design with free software tools and the efabless platform in the LCSR

Skills

Electric CAD

Area of Expertise

Academic: Student

Astria Nur Irfansyah

Lecturer, Department of Electrical Engineering Institut Teknologi Sepuluh Nopember INDONESIA

Steven Herbst

I'm a PhD student working to make mixed-signal chip design more accessible, drawing inspiration from software development techniques. Prior to starting the PhD program, I spent a number of years working in industry at both the chip- and PCB-level on optical sensors and power systems.

Tapas Kumar Maiti

Dr Tapas Kumar Maiti, a former associate professor at Hiroshima University Japan, moved to DA-IICT India where he is a faculty member, since June 2019. He was a visiting faculty to IIEST-Shibpur. He has amazing research experience at McMaster University, Canada and IIT-Kharagpur. He has published more than 100 papers in reputed journals and conferences, and also co-authored a book. He received ICMM Excellent Presentation Award, IAAM Scientist Medal, and University Gold Medal. He is a member of IEEE, and Life Member of IEI. Currently, he is working in the areas of Intelligent Computing Devices, Robotics, and Cybernetics.

Diego Hernando

Analog IC Desing Masters Student. Currently learning about PLL desing

Micah Tseng

Skills

Magic CAD

Area of Expertise

Academic: Student

Leonidas Kosmidis

I'm a Senior Researcher at the Barcelona Supercomputing Center and Junior Faculty at Polytechnic University of Catalonia (UPC). I'm the recipient of the RISC-V Educator of the Year Award 2019, for the advanced graduate course Processor Design I'm teaching at UPC, which is focused on the design of high-performance safety-critical systems. I'm the PI of the GPU4S project funded by the European Space Agency (ESA) in which we are investigating the applicability of embedded GPUs in space.

Barry Muldrey

Assistant Professor of ECE at University of Mississippi

Himanshu Rai

Skills

asic

Area of Expertise

digital design

Thibault Tostain

French Student

Skills

Electric CAD

Area of Expertise

Academic: Student

Krister Borge

Department engineer at the University of Oslo.

Estevao Coelho Teixeira

I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.

Hely Galvao Jr

Gentlemen: I have a professional background in the automotive industry, working in production management, IT and logistics where I worked as a technician, supervisor, coordinator and manager, which allowed me the following experiences: 15 years in the automotive industry, managing production and industrial logistics, planning, scheduling and production control in serial and batch production lines. With experience in dimensioning, planning and implantation of a manufacturing unit with productive start and logistics transfer without production losses. 20 years in IT management, in a soft house in the implementation, parameterization and maintenance of ERP Management projects (programming, database and systems analysis), maintenance and specification of electrical equipment, materials and systems. 4 years ago I started working with maintenance of electronics, commercial, industrial equipment , hospital, motors and transformers. Study and implementation of projects in the electrical discipline for overhead and underground networks, electrical infrastructures in residential, commercial, industrial works and maintenance of equipment in the electronics laboratory. Research and development of Brain-Machine Interfaces. As a form of relaxation and leisure, I developed an aptitude for fine arts where I have worked as a draftsman, painter, sculptor and modeler for over 20 years. I have mastery of Project Management methodology, knowledge in several SAP systems, in addition to Advanced Office package

Yunus Dawji

I am a PhD candidate with analog and digital design experience.

Tayyeb Mahmood

Computer architect, SoC designer, Electrical Engineer

Angsuman Roy

Skills

Electric CAD

Area of Expertise

Analog: Design

Jair Garcia Lamont

Designer specialized on VLSI radiation tolerant architectures and circuits

ARVIND VIJAYAKUMAR

Msc Microelectronics from TU Delft. Passionate about Analog IC designs.

S Skandha Deepsita

Chip-design enthusiast, passionate to innovate. PhD Scholar @IIITDMKancheepuram

Anmol Purty

I am a fresher interested in VLSI design. I have completed my Masters in VLSI Systems Design in the year 2020.

Mauricio Pardo

M. Pardo (Senior Member, IEEE) received the B.S. degree in electronics engineering from Universidad del Norte, Barranquilla, Colombia, in 2002, and the M.Sc. and Ph.D. degrees in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, USA, in 2007 and 2012, respectively. He is currently an Electronics and Electrical Engineering Department Graduate Programs Coordinator with Universidad del Norte and leads the electronic analog design area. His research interests include the areas of oscillators, energy harvesters, and renewable energy systems.

Stephen Rector

RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.

ARINDAM MANDAL

I am currently a postgraduate student at the University of Calcutta and graduate with a Bachelor of Science Degree in Electronics, which will broaden my aptitude in numerous aspects. The curriculum is designed for proficiency in problem-solving techniques, organizational skills, and other mechanics that will help me to execute solutions. Which gives me the opportunity to explore in-depth learning experiences in various technology. I am interested in astrophysics, radio astronomy, solar physics, and other space and atmospheric research, also in semiconductor physics and VlSI technology.

Akash Levy

I'm currently a PhD candidate at Stanford studying Electrical Engineering with Prof. Priyanka Raina. I graduated from Princeton with high honors in Electrical Engineering and certificates in Applications of Computing and Engineering Physics. I completed my Stanford M.S. degree in EE; my current PhD research focuses on emerging memory/circuit technologies (resistive RAM/NEM relays) and efficient reconfigurable computing (FPGAs/CGRAs). I consider myself an eclectic learner who has never been satisfied to work in just a single area. In the past, I've done research projects across an extremely wide array of subjects, including oxide nanoelectronics (Prof. Patrick Irvin, Pitt), stochastic simulation of biochemical processes (Prof. Marcus Dittrich, PSC), deep learning applied to petroleum well data (Prof. Verena Kaynig-Fittkau, Harvard/QRI), and development of quantum cascade devices in group-IV materials (Prof. Claire Gmachl, Princeton). My senior thesis at Princeton with Prof. Prateek Mittal was focused on privacy threats posed by Content Delivery Networks. I've also worked as a software intern at two companies, GoFundMe and Amazon; there, I took on data science and analytics problems affecting business. Recently, I completed an (entirely virtual!) internship at NVIDIA focused on improving circuit design with AI. Additionally, I have several personal projects I'm proud of: an analytics engine for online Set! to understand how people learn the card game, enabling Amazon Alexa home assistants to rap battle each other, studying graph techniques for understanding musical collaborations... and so on. I love meeting/hearing ideas from new people, so feel free to contact me. Cheers!

Stephen More

Hi I'm a MASc Student at University of Toronto. My research focuses are FPGA architecture, DL Acceleration, Heterogenous devices and CAD tools.

Saurabh Suryavanshi

Device engineer, playing around with circuit design.

reza noroozi

Skills

ngspice

Area of Expertise

Academic: Student

Subhash Arya

I am Full Professor and Head in the Department of ECE, NEHU, Shillong. My research area is Silicon Photonics, Optical Communication, Photonic Integrated Circuits.

Ben

Students

Area of Expertise

Academic: Student

Anton Maurovic

A software developer, technology manager, and hardware tinkerer aspiring to imbue slices of crystals with intelligence.

JOHN RIVERA

As an experienced Electronic Engineer with a solid foundation in FPGA design, embedded systems, and IoT, I specialize in high-level hardware programming and real-time signal processing. With expertise in RTL, RISC-V, Verilog, SystemVerilog, and VHDL, I bring a robust understanding of digital design to my work. My professional background includes over a decade in the PCBA assembly industry, where I programmed and configured SPI and Chip Mounter machines, managed production processes, and handled CAD and Gerber files for precision assembly. Additionally, I am well-versed in designing and testing complex circuits using tools like Proteus, Fritzing, and Altium, with a particular interest in the emerging role of AI in electronics. As a career coordinator, former educator in electronics, and an active researcher, I blend practical industry experience with a passion for fostering innovation and teaching in the electronics field. My recent projects involve integrating IoT with embedded solutions, exploring the intersection of FPGA technology with real-time applications, and continually expanding my knowledge in artificial intelligence.

Skills

Digital Design & FPGA Development: Proficient in VHDL, Verilog, SystemVerilog; extensive experience with FPGA-based projects, including RISC-V processor design, RTL, and high-performance digital logic. Embedded Systems: Skilled in microcontroller programming and embedded system design, with hands-on experience in STM32, Arduino, and ESP32 platforms. PCB Assembly & Manufacturing: 10+ years of expertise in PCBA assembly, including programming and configuring Panasonic CM602 machines, managing SPI and Chip Mounter systems, and working with CAD and Gerber files. Circuit Design & Simulation: Proficient in circuit design and simulation with Proteus, Fritzing, and Altium Designer, applied in various real-world applications, including prototyping and testing. IoT & Data Acquisition: Experienced in integrating IoT solutions with embedded systems, using technologies like Wi-Fi, Bluetooth, and cloud data management with platforms like Ubidots and Google Sheets. Signal Processing & Biosensors: Knowledgeable in EEG signal acquisition and analysis, with experience using Cyton Biosensing Boards and OpenBCI hardware for real-time data applications. Project Management & Coordination: Skilled in coordinating cross-functional teams in technology projects, including overseeing electronic design and manufacturing processes, conducting ISO internal audits, and managing production and quality assurance teams. Software & Programming: Competent in Python for data analysis, automation, and Odoo development; familiar with HTML, CSS, and JavaScript for web-based applications and data visualization. Teaching & Mentoring: Background in academia as a former electronics professor, with a talent for explaining complex concepts, developing educational materials, and guiding students in practical and theoretical electronics applications.

Radha Krishna

A VLSI enthusiast.

Jerome Helffrich

Quantum mechanic

Manuel Muro

Known since I was 12 years old that I wanted to be an electrical engineer, by the time I was like 14 or 16 years I knew that I specifically wanted to design microprocessors. I officially became an electrical engineer by graduating with a B.S.E.E. along with a minor in Business from N.C. State University. With more than 30 years of industry experience, I look forward to bringing some of my own original ideas and visions into reality and I am very much tapped in the entrepreneurial spirit while also be an advocate for Open Source projects, both Software and hardware based, along with being a super advocate for the Agile movement for all engineering disciplines, i.e. beyond it just being a thing software folks do!

David Bertuch

Skills

C/C++ ngspice

Area of Expertise

Academic: Student

Alex P James

Professor Alex James received the Ph.D. degree from the Queensland Micro and Nanotechnology Centre, Griffith University, Brisbane, QLD, Australia. He works as a Professor of AI hardware at School of Electronic Systems and Automation, and Dean (Academic) at Digital University Kerala. He works in the broad area of brain-inspired systems, memristive systems, intelligent semiconductor devices, analog circuits and imaging systems. He is Prof-in-charge of Maker Village that supports over 80+ hardware startups. He is Chief Investigator of the centre for Intelligent IoT Sensors, and India Innovation Centre for Graphene, developing new products to the market. Dr. James was the founding chair for IEEE Kerala Section Circuits and Systems Society. He is a member of IEEE CASS Technical committee on Nonlinear Circuits and Systems, IEEE CASS Technical committee on Cellular Nanoscale Networks and Memristor Array Computing, IEEE Consumer Technology Society Technical Committee on Quantum in Consumer Technology (QCT), Technical Committee on Machine learning, Deep learning and AI in CE (MDA) , Member of BCS’ Fellows Technical Advisory Group (F-TAG) and Member of SIG on Electronics for Agrifood.

Mads Hommelgaard

Design Consultant

Aisha Khan

I am a current Master's student in IC (Integrated Circuit) and Systems Design, as well as a Research Assistant at the Micro Nanoelectronics (MiNE) Lab located at SEECS NUST. I completed my Bachelor's degree in Electronics Engineering from UET Peshawar. As a member of the MiNE Lab team, I am involved in cutting-edge research in the field of micro and nanoelectronics, with a specific focus on the design and development of integrated circuits and systems. My academic and research background has provided me with a strong foundation in electronics engineering, and I am passionate about utilizing my skills to contribute to the development of innovative technologies in this field.

Erik Hartholt

Manager R&D

Skills

Electric CAD

Area of Expertise

Sensoring

Alex Brown

BOC Sciences provides a wide range of research chemicals and biochemicals including inhibitors, building blocks, carbohydrates, nucleosides, nucleotides, GMP Products, impurities and metabolites, APIs, natural compounds, ADCs, stem cell molecule and chiral compounds. BOC Sciences specializes in small molecules synthesis, biosynthesis, purification and characterization. We have been supplying high quality products for our esteemed customers in academia, pharmaceuticals, biotech, CDMO, material sciences and agriculture industry to support their research and production needs. We work closely with our synthetic laboratories, fermentation labs, OEM and global partners and proudly offer a full range of product portfolio.

Skills

ngspice

Area of Expertise

Academic: Student

Efe Bayrakçeken

A student that loves to tinker

zhenwei yu

Skills

analog IC

Area of Expertise

Academic: Student

原 高

Skills

Electric CAD

Area of Expertise

Analog: Design

Usman Khan

Usman received B. Sc. Electrical Engineering from University of Engineering and Technology, Peshawar, Pakistan, in 2006. He obtained M. Sc. Electronic Engineering from GIK Institute of Engineering Sciences and Technology, Swabi-Topi, Pakistan, in 2008. He completed his Ph. D. in “Sensorial and Learning Systems Engineering” from University of Rome "Tor Vergata", Italy, in May 2014. During doctoral studies, he visited Nanoelectronic Science and Engineering Laboratory (NESEL) of Sungkyunkwan University (SKKU), South Korea, for six months. After completing Ph. D., he pursued post-doc research at initially Tor Vergata (1 year) and then at NESEL (2 years). In December 2017, he became a Research Professor at SKKU which he pursued for one year. In December, 2018, he joined School of Electrical Engineering and Computer Science (SEECS), National University of Sciences and Technology (NUST), Islamabad, Pakistan, as an Assistant Professor. Since February, 2021, he is an Assosiate Professor at SEECS. He has so far published 22 articles in top-tier Journals and had delivered eight conference talks. Since 2015, he has also been a reviewer for Nanoenergy and Sensors MDPI. His research interests include micro-nano systems, nanoelectronics and electronic interfaces for micro systems.

SUMANTO KAR

Researcher at Indian Institute of Technology, Bombay

Anthony Kung

I'm a Graduate Research and Teaching Assistant at Oregon State University.

Nicholas schlensky

Designer creating analogue circuits for instrumentation used in medical and physical sciences.

Changil Son

Developing the High Performance Computing SoC

Alper Başarır

lifelong learning.

Taher Kourany

Taher Kourany joined Scenario Design Services, Cairo, Egypt as a Senior IC Design Consultant in 2016. He received B.Sc Degree in electronics and communications engineering from Ain-Shams University, Cairo, Egypt, in 2012. He received M.S. degree in electronics from the American University, Cairo, Egypt, in 2015. Until October 2015 he was a Research Assistant with the Center of Nanoelectonics and Devices Research Labs at Zewail City for Science and Technology. Mr. Kourany has published papers in the field of time complexity reduction algorithms of floorplan representations, area and wirelength minimization, Pareto-front multi-objective optimization algorithms of highly chaotic systems. His current research interests include high linearity Power Amplifiers, time complexity reduction algorithms, data structures, parameters estimation of highly chaotic systems, and the synthesis of analog IC design and layout.

Pramod Ananda

PRODUCTS AND CONSULTING IN AEROSPACE, SEMICONDUCTORS, SAAS, ROBOTIC EQUIPMENTS, COMPUTE SYSTEMS, QUANTUM, TELECOM AND INDUSTRIAL.

Saad Gillani

My name is Syed Muhammad Saad Ahmed Shah, and I am an ambitious student pursuing a degree in Electrical Engineering at NUST (National University of Sciences and Technology), specializing in chip designing and digital system design. I am writing to express my sincere interest in contributing my skills and passion for chip designing to your esteemed company. Academic Background: During my academic journey, I have excelled in various courses that form the foundation of integrated circuit design. My coursework includes advanced topics in digital logic design, microelectronics, VLSI, and FPGA programming. I have gained hands-on experience in Verilog programming and have successfully implemented FPGA-based projects, including dynamic positioning of wind power platforms and ball and beam control systems. Passion for Chip Designing: My interest in chip designing stems from its potential to revolutionize technology and create innovative solutions that positively impact society. The idea of crafting complex electronic systems from scratch and optimizing their performance intrigues me. I am eager to explore the world of ASIC and FPGA design, as I believe it aligns perfectly with my passion for creating cutting-edge semiconductor devices. Skills and Attributes: Apart from my technical skills, I possess strong analytical and problem-solving abilities. My adaptability and eagerness to learn allow me to tackle new challenges with determination. I value teamwork and collaboration, and I thrive in environments where ideas are shared and cultivated collectively. Future Goals: As I move forward in my academic journey, my goal is to be at the forefront of chip designing and contribute to the development of advanced technologies. I see myself as a part of a dynamic team, working on groundbreaking projects that shape the future of the semiconductor industry.

Solaymane Nkicha

good

Skills

Electric CAD

Area of Expertise

Academic: Student

Onri Jay Benally

Leader of a quantum hardware engineering team. Quantum hardware engineer, IBM quantum administrator/ developer, carpenter from the countryside in northern Arizona.

Ravi Teja

I am a results-driven Electrical Engineer with a strong foundation in digital design, RTL to GDSII flow, and system-level architecture, complemented by hands-on experience with FPGA and ASIC environments. With expertise in Verilog, SystemVerilog, and VHDL, I have designed and implemented advanced digital systems, including high-efficiency MLP architectures and custom ASIC designs for optimized performance and power efficiency

Abdulbary Game

Skills

Electric CAD

Area of Expertise

Analog: Design

Dirk Koch

Academic leading a research group active in FPGA research and open-source.

Muneeb Shah

Skills

Electric CAD

Area of Expertise

Analog: Design

Andy Reid

Lecturer in analogue electronics at University of Strathclyde

Skills

ngspice

Area of Expertise

Academic: Teaching

Klavs Rommedahl

Graduated as electronic engineer in '93. Think it could be nice and fun to try out this part of the electronic life/world :). I have worked a lot with digital designs over the years, everything from small LED controllers to larger computer boards. And then I am a PCB geek.

Muhammed Ali Koşal

I'm a electrical engineering student in Turkey and intrested in VLSI design.

Area of Expertise

Academic: Student

Hans Meyvaert

Power electronics IC designer with in-depth experience in switched-capacitor and hybrid DC-DC converters.

Facundo G Aguirre

M.S. Computer Engineer, Cybersecurity, IoT Consultant.

Harmoniq Punk

In the electronic age, privacy is our shield — allowing us to reveal ourselves by choice. As the musica universalis guides the universe in harmony, so should our creations. Let's ignite a new Renaissance, driven by humanism and curiosity, a harmonised future of automated world, echoed with the music of human potential. 一期一会

HUGO HERNANDEZ

Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. Hugo is an Analog/Mixed‐signal design engineer with strong background in IC design techniques, industry experience on ASICs for sensoring applications and hands on experience in 28nm, 55nm, 65nm, 130nm, 180nm and 0.35um CMOS process nodes. Research interests include Low power Data Converters, SAR ADCs, DACs, PLLs and Low power analog design.

diminddl

University student into all things digital and fast.

Everson Martins

Experience in the area of electrical engineering, with an emphasis on analog circuit design.

Skills

Electric CAD

Area of Expertise

Academic: Teaching

Brendan Patrick McGinn

I am a Computer Engineer at the University of Notre Dame, with minors in Innovation and Entrepreneurship and Corporate Engineering Practices. I enjoy working with assembly languages and at the circuit level.

Steven Conaway

Computer Engineering Student at the University of Notre Dame

Whitney Maria Durham

I am into Analog and Mixed Signal designs. I have been involved in creating ASICs for 30 years.

ALI Shan

Electrical Engineer with five years of expertise in FPGA Design and Embedded Systems, cultivated through roles at prestigious organizations like RapidSilicon, Pakistan Air Force, and NRTC. Proficient in RTL design, verification, and protocol implementation. Experienced in scripting, simulation tools, and FPGA technologies. Seeking dynamic career opportunities to further enhance complex digital design systems and contribute to semiconductor innovation.

Shrikrishna K

MSECE student at Ohio State University with focus on Analog & Mixed Signal VLSI circuits

Sumit Ambuskar

B. Tech. Final year student of Electronics Engineering

Enrico S. Marcelo

I'm a starter, i don't sit down and wait for instructions, i have initiative to start and create solutions.

Lance J Lueloff

From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...

Pallavi Kar

I have recently completed a course in VLSI Design and Verification. During my training period, I have done two projects: Router Design and Verification and the second one is UART Protocol.

Bjørn Stevning Hole

I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.

Dr. Pallavi G. Darji

I am working as an asssociate professor in EC departments, at Dharmsinh Desai University, Nadiad, Gujarat. I am working in the field of Analog and Mixed signal Design. I had proposed small size CSDAC in my phd work and now I am working on 16 bit bidirectional data bus to communicate two ICs at different voltages. I want to prepare IC for it.

Van Ky Nguyen

I am a materials scientist specializing in micro and nanofabrication, semiconductor devices physics and semiconductor materials characterization. I would like to learn more about chip design.

Sean

Skills

ngspice

Area of Expertise

System: PCB

Jeorge D. Anderson II

A mechatronics engineer

Quang Pham

Skills

Electric CAD

Area of Expertise

Academic: Research

Carl L Brando

I graduated with a computer engineering BS/MS from the University of Maryland College park. I now work in industry at a medical device company.

Cornell Custom Silicon Systems

We are an undergraduate chip design team at Cornell University dedicated to open-source design!

Sean May

Skills

ngspice

Area of Expertise

System: PCB

Sujoy Chabri

Developer , worked in app and cloud development

Srimanth Tenneti

I am a ASIC Designer with a piqued interest in AI Hardware Design.

Mohammed Fayiz Ferosh

I'm a BTech Electronics and Instrumentation graduate and an electronics enthusiast who was inspired by the open-source silicon technology and it's accomplishment and aim to build a career for myself in VLSI specifically as an ASIC Physical Design Engineer.

abdullah muamar

Abdullah Muammar is a university student who loves learning in many areas of life

Area of Expertise

Analog: Design

Mario Petramale

I'm an electronic/robotics engineer

JOC_wcg_2024

CINVESTAV Research Center

Skills

ASIC Design

Area of Expertise

Academic: Research

QKing Software

I'm an person who is interested in electronics and computers my whole life. I like to design chips and pcb's.

Sanjay Garani Ramachandra

Recent MSEE graduate from ASU specializing in Analog Circuit Design eager to contribute my knowledge and passion for designing innovative circuits. Bringing a solid theoretical foundation and a commitment to excellence. I am eager to contribute to cutting-edge projects.

Diarmuid Collins

Founder / director of SLICE Semiconductor, specialising in analog IC design contract services and high performance mixed signal ASIC solutions.

Aniket Gupta

currently pursuing masters in VLSI for IIT Bombay.

Irfan

Skills

Electric CAD

Area of Expertise

Academic: Student

Wongsakorn Techaboontam

Project manager & technology solution

Enrique Rivera

Skills

RFIc design

Area of Expertise

Analog: Design

Prem Kumar

Skills

Electric CAD

Area of Expertise

RF Testing

Michael Parker

Since 2001 I have worked for a small IC Layout design firm located in Wilsonville, Oregon called Coast-to-Coast Layout Design Inc. We provide full-custom mask design services to big semiconductor partners, both digital and analog/mixed-signal. I began my career as a part-time Linux systems administrator, and was taught mask design by my mentor and boss, then over the past couple decades I moved up the ranks to my current GM position where I am responsible for most day-to-day operations and management of multiple mask design teams who are very highly valued by our customers that rely on our services to meet tough tapeout schedule and quality requirements. I'm here because I'm planning to use open-source EDA tools to help train new mask designers to help grow my company.

Vinay

I have around 15 years of experience in Digital Design both in FPGA's and ASIC.

Devadeep Reddi

As a VLSI enthusiast, I completed a 6-month internship as a NAND product engineer at Micron Technology where my work comprises of post-silicon validation, data analysis using JMP, and testing NAND components under varying PVT conditions in DDR3 and LPDDR4. I'm passionate about CMOS and have experience simulating NAND output drivers through HSPICE simulations in collaboration with the design team. Additionally, I have proficiency in System Verilog, RTL design, and a solid grasp of digital IC, analog IC, and physical design. I hold a master's degree in Microelectronics from BITS Hyderabad and a bachelor's degree in ECE from Gayatri Vidya Parishad. I achieved a GATE ECE score of 571 with an All India Rank (AIR) of 1404 in 2023. devadeepreddi20@gmail.com

Ramavenkateswaran Nagarajan

I am interested in reserach and projects on IC Design, Neuromorphic Computing and Digital Design

Madhav Parihar

Learner

Area of Expertise

Academic: Student

Diop Sandjiri

jeune travailleur sympa et ambitieux

Guruprasad Kedilaya

I am a final year in BE in Electronics And Communication in Canara Engineering College

Skills

ngspice

Area of Expertise

Analog: Design