Mixed mode IC designer and architect - 25 years in startups and large corp. Audio, RF, Digital Backend flow, Design management systems. Analog design Cont and switch cap. circuits low power, oscillator and PLL systems. Digital synth, place and route, timing, DFT, tapeout.
Co-Founder and Director of Silizium Circuits Private Limited.
im a student who want learn design VHDL
Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.
Aspiring analog IC designer
Analog systems and circuit design engineer with extensive product development and applications experience with a strong focus on end markets. Proven ability to work closely with a diverse set of customers and clients to properly specify the requirements of a mixed-signal ASIC. Ability to manage product development from foundry selection through design, tape-out, and mass-production.
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
20+ Years of Experience in Chip Design
I'm an AMS Design engineer. I like the IC design world and my recent goal is to be a scientist :)
I have been working on Analog/Mixed-Signal Integrated Circuits design since last 16 years. I graduated from NED UET, Karachi in 2001 and then worked with Avaz Networks, a Silicon-Valley Company on RTL design and verification of a high-density Line Echo Cancellation Engine for a couple of years. Joined Linkoping University, Sweden in 2003 for Masters in SOC, which concluded with a Masters Thesis on Sigma-Delta Modulators with Fraunhofer Institute of Integrated Circuits, Germany in 2005. The same year I joined University of Trento and Fondazione Bruno Kessler, Trento, Italy for my PhD on Readout Interface Design for MEMS Capacitive Microphones. Worked with ST-Microelectronics, Milano and Analog-Devices, Copenhagen as a Guest PhD Student. This Phd results in 20+ publications and 2 patents with 3 successful MEMS Readout ASICs.
I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.
I have more than five years’ experience in electronics integrated circuits industry. I have been involved in more than six silicon runs which were all successful and meeting expectations.
I am a experienced analog and mixed-signal circuits designer, using standard and/or custom circuits ( external IPs or from my own design ).
Developer of open source EDA tools on Open Circuit Design
Analog IC design engineer with expertise in designing analog building blocks variable gain amplifiers, active filters, frequency synthesizer (integer-N PLLs), voltage regulators.
I am a teacher at MIT Manipal , currently pursuing my Ph.D in the field of LDO voltage regulator.
VLSI circuit design engineer with significant experience in microprocessor design in semiconductor processes from 65nm to 10nm. Provided register file designs and design training for Intel Big Core and SOC projects. Helped create semi-automated array layout methodology. Established cross-organizational methodology for variation analysis in register files. Converged memory IP handling across multiple organizations.
Valparaiso University - College of Engineering - ECE professor
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
AMS Design Engineer Love Electronics and programing
I am a full custom analog and mixed-signal IC design consultant. I have been consulting for over 22 years following 12 years as a staff member at MIT Lincoln Laboratory.
We are building a community of OSHW Product Creators. Our focused mission is to simplify the process of smart product creation and making it available to everyone. We believe in Open Source Hardware as the foundation for addressing the massive and divergent forms and features of the new connected world.
Analog Designer
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Manager of Universal Avionics System Corporation(UASC) PLD design group. This group is tasked with designing, implementing and approving, in accordance with RTCA/DO-254 guidance, all ASIC/FPGA used in the Universal Avionics product line.
Electrical Engineer M.Sc. Microelectronics
Working as a instruments engineer, and currently working on my masters of Microelectronic Systems Design. Passionate about designing analog/mixed signal IC's and systems
Computer Science Engineer with extensive hardware knowledge.
Embedded System Engineer
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
Analog full custom design experience of Low power VOltage regulators, Bandgap reference, calibration circuits and common mode receiver. worked on SERDES IP (up to 12Gbps) compliant with USB 3.1 and SATA protocols. AS ESD ENgineer for SERDES IP Improved existing ESD network simulation strategy and ESD network for robust ESD performance reliability and automated existing current density flow for ESD for better efficiency. Technology Nodes: 14nm(FINFet), 28nm(FDSOI) 28 nm,40nm,90nm,180nm (Bulk)
Analog Designer
I am an EMC Specialist working at Renault and currently looking to fill my free time with interesting projects (Hardware, EMC, Design, Simulation)
Recent college graduate from San Jose State University with Masters in Electrical Engineering degree. Specialization - Digital Design and Verification.
Power IC designer for 27 years primarily in Silicon Valley.
I am a RD designer focus on power management ic design. I have about ten years working experience. Hope I can do something for this great platform ~ !
Experienced Analog/RF integrated circuit design
I am an Electrical Engineer at Marcus Engineering working primarily on embedded systems in a wide range of applications in the Medical, Military and Aerospace sectors.
I'm VLSI Design Engineer aspirant and like to work on design challenges in VLSI domain. I like to keep updated of cutting-edge technology in my field of interest.
Analog/Mixed-Signal IC Design Engineer
BSEE graduating senior with a focus in digital design. I have taken coursework in Analog, Digital, Mixed Signal and RF IC design, and have experience using Cadence's tool suite as well as NI's AWR. I have also done multiple EDA centric courses in validation, formal and functional verification and Digital IC Testing
Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.
i'm expert analog mixed signal IC design engineer 7 years experience
Current working in my PhD at BarcelonaTech.
Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.
Longtime innovator in analog and mixed signal design. US Patents US2773120A and US2560234A.
Electronics Engineer, passionate about science with strong technical and interpersonal skills for working in a team and successfully completing a project.
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
IC Design Engineer
Worked at Cadence Design Systems for three years. Was responsible for design of PLLs for SerDes IPs
I am Electronic Engineer from Chile, I like DSP and radioastronomy applications an ordinary guy
i have done PGDMA in ASIC Design in physical design domain , from RV-VLSI Bangalore.
Fresh grad electronics engineer and a beginner circuits designer who admires analog/RF IC design. Former intern at ADI© (Egypt) and recently a junior Analog IC designer at Si-Ware Systems (Egypt). My GP was a 5G Transceiver in the band 26.5GHz - 29.5GHz, I designed the upconversion mixer (core circuit, power combiner, LO driver).
Graduate student of ECE department Ain Shams University, and Currently Master Student of ECE department Cairo University with major of Electronics design.
I am a senior researcher in INESC-ID, Lisbon.
Analog Mixed Signal IC Designer
Hardware design engineer
I am researcher with goals of developing high end technologies for the future.
Teaching assistant for ASIC/FPGA and digital ICs courses.
Electronic design house subsidiary of Cinvestav Guadalajara Unit (Center for Research and Advanced Studies), a leading research center in Mexico.
Physical Design Engineer
Analog circuit designer with passion in taking challenges .Interest in ADC,DAC,PLL,SDADC,LDO.Done layout of all these blocks.
Physical Design Engineer
Physical design engineer
Experienced Analog Design Engineer with strong background in HV CMOS ASICs.
Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.
An experimental physicist through sensor and instrumentation development.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. He was Mixed Signal IC designer at LSITEC and DFCHIP (Brazil) where worked for 8 years, and Pos-doc of the Universidad de Sao Paulo in collaboration with ALICE-CERN as analog IC designer in the SAMPA ASIC project. He was Adjunct Professor of the Control and Automation course at the Engineering Institute (CUVG) of UFMT for 2 years. He is currently Adjunct Professor of the Department of Electrical Engineering of the Federal University of Minas Gerais (UFMG).
I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.
Vice President of Engineering - Seamless Microsystems. We design high performance AFEs using proprietary and patented technology that encodes the signal in the time-domain instead of voltage or current. This enables us to design low-power ADCs and amplifiers in scaled CMOS. Contact us if you'd like to hear more and engage our services.
Professor in Electronics Engineering with a PhD. in VLSI (Universidad Nacional de Mar del Plata). Expertise in digital RTL and physical design. Experience in FPGA RTL and HLS design for heterogeneous computing. Knowledge in sub-threshold analog design. Fiction writer (National Literature Award for Novel, 2011, Costa Rica)
Mad Scientist
Passionate about engineering and electronics. Love teaching and mentoring. Highly experience in analogue and RF electronics and enjoy managing projects.
Physical Design Engineer
I am enthusiastic at analog IC design and IC industry. Now I am design power block and analog block in Touch IC.
Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.
MSC in Electrical Engineering BSC in Electronics Two patents in mathematical software in Engineering design and digital signal processing utility box Undergo private research for commercial use in the areas of very high frequency analog and digital circuits
I am an electronics engineer currently working as an intern in STMicroelectronics.
I am currently an Associate Professor in the Electrical and Computer Engineering Department at North Carolina Agricultural and Technical State University (NC A&T). As director of the Automated Design for Emerging Process Technologies (ADEPT) laboratory at NC A&T, I research the following questions: (1) how can we make computers more reliable in harsh environments (i.e., ionizing particles, malicious fault injection) and (2) how can we extend Moore’s law (e.g., 3D IC)? To answer these questions, he interrogates the traditional abstraction layers of integrated circuit design (i.e., functional description, circuit design, physical design) to discover design methodologies that are more relevant to these goals.
Virginia Microelectronics Consortium (VMEC) Professor in the ECE Department at the University of Virginia
Research Scholar | Analog Circuits | EMI Immune Amplifiers | Neuromorphic Circuits
Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group
I'm a physics major studying at UC Berkeley interested in accelerating research and computational workloads with modern VLSI and FPGA tech.
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
I'm an experienced analog mixed signal layout design engineer. Have experience integrating IPs, Full chip layout design. I have hands on experience in TSMC 40LP, 28nm, 16ff, 7nm, GF 130nm process nodes.
Aspiring IC Design Engineer
Assistant Professor (IISc) | Ph.D. & S.M. (MIT) | B.Tech. (IIT-KGP)
I am Physical Designe Engineer -1 at Signoff Semiconductors
PhD Student Research on Integrated Sensor Interfacing Systems featuring signal conditioning and A/D conversion. Functional blocks developed: VGA, current-steering DAC, SAR ADC, AA Filters, SPI master/slave.
I am interested in the platform-based complete SoC design/verification automation methodology and framework
More than 14 years of experience in Electronic Design Automation roles with leading industry companies like Intel, Samsung and others. Have a strong background in EDA best practices and technologies like DRC, LVS, XRC, PERC and others. Have a mixed background in circuit. design, data science and programming with emphasis on data analysis for microchip design. Have strong background leading project deliveries to fortune 100 companies in the world. B.Sc. in Electrical Engineering from faculty of Engineering, Ain Shams University, Cairo, Egypt.
Professor of CSE at UC Santa Cruz
Principal engineer leading PNT product development at GE Aerospace
BS EE from Stanford University and Digital Designer. Areas of focus are computer architecture, VLSI, and Analog IC. I am interested in making chips to test myself.
I am an Associate Professor teaching VLSI design, hardware security, and digital circuit design at Drexel University. My research interests include analysis, modeling, and design methodologies for high performance digital and mixed-signal integrated circuits, power management for SoC and microprocessor circuits, hardware security, including digital and analog obfuscation and Trojan detection, and electric and thermal modeling and characterization, signal and power integrity, and power and clock delivery for heterogeneous 2-D and 3-D circuits.
A researcher and VLSI guy
I am a PhD student and faculty member in Electrical Engineering Department at Air University Islamabad Kamra Campus.
I am phd student on Power electronics.
A hard working IC Design master student aiming excellency and professional experience in the field of Integrated Circuit Design specially analog and mixed signal design like Data converters, LDO, Opamp and Bandgap reference.
Analog Circuit Design Engineer with 22+ years of experience. Areas of expertise are OpAmp, BandGap, POR & ADCs.
Doctoral student at the Tokyo Institute of Technology.
An aspiring Analog/RF IC designer aiming to make a difference through existing knowledge and innovative ideas.
Analog mixed signal IC design professional with 22 years of experience
I am a fourth year Electrical engineering student interested in design and verification of digital and analog integrated circuits. - I have experience doing layout for RFIC using SOI processes where I gained extensive knowledge in device physics, floorplanning, ESD protection techniques, and techniques to mitigate manufacturing limitations -I have extensive experience using Cadence Virtuoso layout XL , running verification simulations using Cadence ADE Explorer, EMX, and PEX.
Experienced PCB/Package Layout Engineer with an extensive experience in EDA automation using SKILL python powerscript
Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.
Developer of open source reliability verification system CVC(RV). https://github.com/d-m-bailey/cvc
I am an Electrical Engineering working VLSI design farm with 7 tape-out experiences.
Program manager with more than 25 years experience in the semiconductor industry. Expertise in EDA tools, analogue, RF and high-voltage PDK development, sensor design, design support for electro-magnetic compatibility, ESD and functional safety.
Undergrad at Harvey Mudd College interested in Computer Science, Computer Engineering, Electrical Engineering and Filmmaking. GitHub: http://github.com/kavidey Youtube: http://youtube.com/@kavidey
30+ years in IC design, completed several NOR/NAND flash projects, and running in production.
Professor for microelectronics
I work with embedded systems, analog electronics and general physics research. I founded a small engineering services company in Brazil, currently working with a team of 3 engineers to create products and help companies on their way to to production.
Experienced Senior Design Engineer with a demonstrated history of working in the electrical and electronic manufacturing industry. Skilled in DAC, SPICE, ADCs, Electronics Hardware Design, and Management. Strong engineering professional with a M-Tech focused in VLSI System Designs from Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering &Technology and also a B-Tech Degree in the field of Electrical, Electronics and Communications Engineering from Mahatma Gandhi Institute of Technology.
Master's research student in IC design has hands-on experience on Cadence tools like Virtuoso, Genus, Innovus, Calibre. Motivated to learn more in the field of IC design
Currently enrolled as a MS fellow in EE specialization in IC Design.
I have done my undergraduate in Electronic Engineering. Right now I am doing MS in Electrical Engineering(Specialized in IC Design) from NUCES FAST, Islamabad.
Im designated as a lab engineer at Fast NU Isl. My area of expertise is analog and Rf ic design.
hi, i am jawad. I have done my bachelors in electrical engineering from UET Lahore, Currently, as a research student, i am interested in SoC's. My future goals is to develop expertise in analog, mixed signal and RF circuits designs.
I have done undergraduate in Electronics Engineering and doing MS in IC design from NUCES-Fast Islamabad.
RF/Analog IC design and SOC
I'm a postdoctoral researcher focusing on the development of a high-sensitivity MEMS/NEMS-based sensor device for gas and biosensor applications. For device fabrication, I have experience with lithography techniques such as E-beam, mask/mask-less UV, and imprint for solar cell and sensor applications. I have extensive clean room (Class 10,000, 1,000, and 100) expertise with PVD, ICP-CVD/RIE, and lithography-based tools, as well as a strong instrumentation background. My doctoral focused on Advanced Micro-Patterned, Narrow Finger Width Front Contact Metallization Schemes for Silicon Solar Cells. I have extensive experience in the fabrication and characterization of silicon and thin-film solar cells, as well as in-house tool development. I designed and built four pilot scale machines. As an interdisciplinary researcher, I've also worked on the development of chemi-resistive type gas sensor devices based on metal oxides, thin films, and other materials. Defect engineered metal oxides and their surface structural improvements in surface reactive sensing platforms for flexible, temperature-independent, and low-power MEMS gas sensors were the focus of the research.
I am a microelectronic engineer/CMOS designer with an emphasis on digital & low-power electronics and front-end circuitry. I am an academic at The University of Sydney, Australia and working on devices to data solutions for a range of problems such as unmet needs in electronic monitoring/sensing and interventions in neurological disorders.
Assistant Professor. ECE. University of Pittsburgh. Interests: Neuromorphic and Biomedical Systems Design
Open-source software developer with 30 years experience in back-end verification.
PhD in microelectronics, Professional Skills -Electronics circuit design; both IC and discrete circuit design. -Experienced in circuit design and layout in different CMOS technologies with tape-out experiences from 0.xn--18m-yyc to 40nm.
Analog IC design engineer with background in sensor Front-End design and semiconductor radiation detectors.
Chip Design CAD Expert
Founder and CEO of Earth ICT, SPC NAICS 334413; Semiconductor and Related Device Manufacturing Incorporation Date: 08/03/2021 Corporation ID: C4773876 1-650-996-7232 art@earthictspc.com Biography: Dauntless Entrepreneurial Risk-taker; Invited expert, ITU-T ICT Sector L.TIME (The IC Metric for Energy-efficiency, Quality-Factor) Recommendation. “Art is many faceted; he creates outside the box; he is a serial entrepreneur-intrapreneur and change agent, and is flexible-adaptable-situational. He has worked for Silicon Valley icons such as SRI, Applicon, Computer Sciences Corporation, Informatics, Atari R&D, Interactive Research Corp., Samsung Information Systems America. And he has participated in several startups: Digital Video Inc. (1985–2001), Ravisent Technologies (1998–1999)” [source: ”Sustainable computing - ACM ]
Physical Design over 10 years, Front-End Design over 4 years, have knowledge on DFT, STA, ...
Analog and rfic design professional working since 1997 , Mainly products on wireless ic design, development and testing. mobile, bluetooth, wlan, uwb, rfid , zigbee chips. blocks receiver, transmitter, pll, ldo, mixer, lna, pa, switch , pmic,
I am an graduate student of computer system engineering at Usman Institute of Technology. and working on RISCV based SoC designs since 2019 in Microelectronics Research Lab.
Analog Mixed Signal Design Engineer
Analog & RF designs in interesting, escpically in clock circuits.
Alejandro Bautista received the M.Sc. and Ph.D. with a specialty in Electronics from INAOE, in 2014 and 2018 respectively. In 2016 he was a visiting scholar in the Electrical Engineering Department of the University of Texas A & M under the supervision of Dr. Jose Silva-Martinez. His research interest includes RF/mixed-mode circuits & systems, wireless communications, low-power.
I am hager mohamad diff allh, from faculty of engineering-MINIA university (Electrical engineering department).
fresh. grad electronics and communication engineering minia university advanced analog CMOS circuit design
IC design Engineer
I have an expert in the PCB design area. I am interested for analog design and chip design
Interested in Analog IC Design
Hon-Piu Lam, is a Ph.D. candidate in the Department of Electronic and Computer Engineering of the Hong Kong University of Science and Technology (HKUST). He was an analog IC designer engineer in Valence Semiconductor from 2004 to 2007. From 2007 to 2015, he joined Fujitsu Semiconductor focusing on the embedded NOR flash design. He has been a researcher in HKUST focusing on the integrated power electronic and data converter. His research interests include readout electronics, integrated power electronics and radiation hardened electronics for experimental physics.
Analog IC designer, Assistant Professor at Oklahoma State University
IC Designer
A graduating IC design student with lots of passion and interest for electronics design!
A student of Keio Univ in Japan, interested in analog circuits rather than digital ones.
Graduate student passionate about integrated circuit design for biomedical applications
Analog & Memory IC design Engineer
Mixed Signal circuit designer with over 40 years experience.
Hi, I am Fahrettin Atik and ı am a license student at electric and electronic engineering at Karabuk University in Turkey. I am senior now. Generally ı am working on open source analog design project, specially my interest is about to designing Op Amps. Me and my team got third place in Analog Chip Design competition at Teknofest (A National and International Competition held every year in Turkey) I would like to working as a chip design engineer after graduation... That is me.
I am a Masters fellow student of RFCS2 Lab in IC Designing.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
I am en Electronics Engineer currently Pursuing my Masters in IC design from FAST NUCES Islamabad.
Technology development in intergrated analog circuits. I'm available to design analog and mixed-signal circuits as an external contractor.
Love for ELectronics Chips Designing, Eager for knowledge. Close to Nature and meet me on the success road.
I am a Graduate Research Assistant at the University of Tennessee Knoxville, pursuing the PhD degree in Mixed-Signal Analog Circuit design.
Adjunct professor in Columbia University.
Mixed-signal designer
Hi, I'm a student at UACJ and I like integrated circuit designs.
MS in IC Design Fellow, RFCS2 lab at FAST-NU Islamabad, Pakistan
Research Scholar at Department of Electrical Engineering, Indian Institute of Technology Ropar, India. Current research area is EMI Immune Amplifiers. Previous works include a Memristive adaptable ramp generator circuit for a on-chip training signal generator for trainable DAC, Modeling and hardware implementation of digital image watermarking algorithms.
An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.
Provides mixed-signal CMOS training to academia using open-source tools and also solution for the consumer and automotive industry.
Silicon Entrepreneur with extensive experience in Digital Physical Design, EDA and HPC Infrastructures for Electronic Design.
Engineering Electronic student of National University of Cordoba (UNC), Argentina. Active member of Robust Circuits and Systems Laboratory (LCSR), in exact and natural sciences faculty (FCEFyN).
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
Founder of e-td55 Desing House for analog circuit and sensors
President and CEO
Analog and Mixed Signals Engineering Students
An analog mixed-signal circuit designer for low-power precision sensor interfaces. See https://staff.aist.go.jp/ippei.akita/
Analog Design Engineer
Lecturer at the Department of Computer Engineering, Kwame Nkrumah University of Science and Technology, KNUST. My primary interest is in analog and mixed-signal design.
I am recently completed my post-graduation in VLSI and Embedded system from coep pune(India). I like to work in a backend design of VLSI.
I am Pratika Tripathi. I am in my final year of Btech. I am very interested in physical designing of IC. I had even taken 3 courses of kunal ghosh sir on physical design, stay, and cts. I am doing my final year project in physical design.
Hello. I am Liam and Analog enginner in South Korea. I want to participate this great opputinity and share my design to other people.
Ph.D. in electrical engineering, 25 years experience in mixed-signal IC design
Electrical engineer with interests in ASIC design, biomedical imaging, and scientific instrumentation.
Amel is an Digital IC designer interested , used to work on HDL based Design for testability, Formal verification of Semi custom and IP based SOC DFT. Currently, working on IC design for Reliability. She designed a Test structures chip for Bias Temperature Instability characterization and analysis using TSMC 180nm Technology.
I am currently a second year PhD. student working in the field of Electrical Engineering at the University of Virginia. My research interests include Analog/Mixed Signal circuit design, Asynchronous computing hardware design, stochastic computing and Ultra-Wide Band transmission circuits
Mixed-Signal Integrated Circuits instructor and researcher.
Research Associate at MERL mainly focusing of firmware and driver development for SoCs.
mmwave RFIC / mmwave RF designer
A bit of everything - mostly focused on networking system level designs / FPGA / Switch Fabric from concept to validation - and now automotive
Electrical Engineer interested in the design of mixed signal ASICs
Full time: Electronics Engineer with an interest in embedded systems solutions. I can take a project goal and design, develop, prototype, program, validate an embedded system reaching that goal. Part-time: Maker, interested in rapid prototyping, my lab has basic machines: CO2 Laser cutter, 3d printers, small milling machine. I've built 3 of my own 3d printers.
Graduate Teaching Assisstant at Purdue SoCET Team
Adroitec Systems is design Services Company for the VLSI and Embedded Software. Founded in 2017, Adroitec Systems is having Register Office at Visakhapatnam with branch offices in Bangalore. Adroitec Systems delivers cutting edge solutions across a diverse portfolio of services including Physical Design, Physical Verification, and Design Verification. With about 50 highly qualified employees.
Designer specialized on VLSI radiation tolerant architectures and circuits
I'm currently a PhD candidate at Stanford studying Electrical Engineering with Prof. Priyanka Raina. I graduated from Princeton with high honors in Electrical Engineering and certificates in Applications of Computing and Engineering Physics. I completed my Stanford M.S. degree in EE; my current PhD research focuses on emerging memory/circuit technologies (resistive RAM/NEM relays) and efficient reconfigurable computing (FPGAs/CGRAs). I consider myself an eclectic learner who has never been satisfied to work in just a single area. In the past, I've done research projects across an extremely wide array of subjects, including oxide nanoelectronics (Prof. Patrick Irvin, Pitt), stochastic simulation of biochemical processes (Prof. Marcus Dittrich, PSC), deep learning applied to petroleum well data (Prof. Verena Kaynig-Fittkau, Harvard/QRI), and development of quantum cascade devices in group-IV materials (Prof. Claire Gmachl, Princeton). My senior thesis at Princeton with Prof. Prateek Mittal was focused on privacy threats posed by Content Delivery Networks. I've also worked as a software intern at two companies, GoFundMe and Amazon; there, I took on data science and analytics problems affecting business. Recently, I completed an (entirely virtual!) internship at NVIDIA focused on improving circuit design with AI. Additionally, I have several personal projects I'm proud of: an analytics engine for online Set! to understand how people learn the card game, enabling Amazon Alexa home assistants to rap battle each other, studying graph techniques for understanding musical collaborations... and so on. I love meeting/hearing ideas from new people, so feel free to contact me. Cheers!
I am an analog design engineer with over 10 years of experience. Most of designs lie in the field of power management (DC/DC converters), frequency synthesis (phase-locked loops), wireless power and data transfer (NFC front-ends as well as medical implants).
I'm the CEO of a fabless semiconductor start-up company and have more than 15 years experience in designing mixed-signal ASICs on various foundry processes.
Hi I'm a MASc Student at University of Toronto. My research focuses are FPGA architecture, DL Acceleration, Heterogenous devices and CAD tools.
Research scientist working in a MOS technology support for teaching at academic institutions.
My name is Sunil Parmar, I have done a master from IIT-Bombay in 2005 and a bachelors from Gujarat University in 2003. After post-graduation, I joined a service company in Hyderabad and later worked with Intel Bangalore. I have worked with the Samsung R&D center in South Korea for Silicon photonics applications and later contributed in Samsung's DDR4 memory IO design. As an employee, I have published few patents and papers. In 2016, I returned to India with a very ambitious goal to set up a semiconductor product company called Powency Circuit Private Limited in the power management domain. In between, After Covid, I decided to develop a MEMS Microphone product and started a project called Sikern. We are currently a small team having three design engineers, one packaging expert and one management staff. We are working with a Japanese supplier and a Malaysian packaging group for our product development. And developing our own ASIC for this MEMS microphone. We started working with a smartphone customer in India for their upcoming mobile model. And hope to work with many more customers within India as well across the globe for our Microphone product.
Full-Time Professor of the Research in Computer Centre of the National Polytechnic Institute of Mexico. My principal area of work is related with the CMOS Analog Design, Digital Design, Soft Computing and Bioinformatics.
As an experienced Electronic Engineer with a solid foundation in FPGA design, embedded systems, and IoT, I specialize in high-level hardware programming and real-time signal processing. With expertise in RTL, RISC-V, Verilog, SystemVerilog, and VHDL, I bring a robust understanding of digital design to my work. My professional background includes over a decade in the PCBA assembly industry, where I programmed and configured SPI and Chip Mounter machines, managed production processes, and handled CAD and Gerber files for precision assembly. Additionally, I am well-versed in designing and testing complex circuits using tools like Proteus, Fritzing, and Altium, with a particular interest in the emerging role of AI in electronics. As a career coordinator, former educator in electronics, and an active researcher, I blend practical industry experience with a passion for fostering innovation and teaching in the electronics field. My recent projects involve integrating IoT with embedded solutions, exploring the intersection of FPGA technology with real-time applications, and continually expanding my knowledge in artificial intelligence.
"Architecting the dreams of a digital future, pixel by pixel, gate by gate."
Analog Mixed-Signal Engineer at InertialWave. Developing next gen electronics for resonator control and sensing.
I am Associate Professor in Department of Electrical Engineering at IIT Bombay, India. My interests are embedded non-volatile memory based systems for edge AI
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
A student of applied physics in electronics instrumentation and control undergraduate.
I majored in electronic science and technology for my undergraduate degree and integrated circuit engineering for my postgraduate degree. During this period, my research direction was analog integrated circuit design and application.
Taher Kourany joined Scenario Design Services, Cairo, Egypt as a Senior IC Design Consultant in 2016. He received B.Sc Degree in electronics and communications engineering from Ain-Shams University, Cairo, Egypt, in 2012. He received M.S. degree in electronics from the American University, Cairo, Egypt, in 2015. Until October 2015 he was a Research Assistant with the Center of Nanoelectonics and Devices Research Labs at Zewail City for Science and Technology. Mr. Kourany has published papers in the field of time complexity reduction algorithms of floorplan representations, area and wirelength minimization, Pareto-front multi-objective optimization algorithms of highly chaotic systems. His current research interests include high linearity Power Amplifiers, time complexity reduction algorithms, data structures, parameters estimation of highly chaotic systems, and the synthesis of analog IC design and layout.
My name is Syed Muhammad Saad Ahmed Shah, and I am an ambitious student pursuing a degree in Electrical Engineering at NUST (National University of Sciences and Technology), specializing in chip designing and digital system design. I am writing to express my sincere interest in contributing my skills and passion for chip designing to your esteemed company. Academic Background: During my academic journey, I have excelled in various courses that form the foundation of integrated circuit design. My coursework includes advanced topics in digital logic design, microelectronics, VLSI, and FPGA programming. I have gained hands-on experience in Verilog programming and have successfully implemented FPGA-based projects, including dynamic positioning of wind power platforms and ball and beam control systems. Passion for Chip Designing: My interest in chip designing stems from its potential to revolutionize technology and create innovative solutions that positively impact society. The idea of crafting complex electronic systems from scratch and optimizing their performance intrigues me. I am eager to explore the world of ASIC and FPGA design, as I believe it aligns perfectly with my passion for creating cutting-edge semiconductor devices. Skills and Attributes: Apart from my technical skills, I possess strong analytical and problem-solving abilities. My adaptability and eagerness to learn allow me to tackle new challenges with determination. I value teamwork and collaboration, and I thrive in environments where ideas are shared and cultivated collectively. Future Goals: As I move forward in my academic journey, my goal is to be at the forefront of chip designing and contribute to the development of advanced technologies. I see myself as a part of a dynamic team, working on groundbreaking projects that shape the future of the semiconductor industry.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
Analog and Mixed signal IC designer
Sr. Electrical Engineer with 40 years of experience, doing R&D, circuit design from concept through layout and to production in Aerospace, Automotive, Industrial and Gas and Oil down-hole business sectors.
School of EE, Kookmin Univ., Seoul, Korea master course
Leader of a quantum hardware engineering team. Quantum hardware engineer, IBM quantum administrator/ developer, carpenter from the countryside in northern Arizona.
Analog-RF IC circuit and system design engineer.
I am a results-driven Electrical Engineer with a strong foundation in digital design, RTL to GDSII flow, and system-level architecture, complemented by hands-on experience with FPGA and ASIC environments. With expertise in Verilog, SystemVerilog, and VHDL, I have designed and implemented advanced digital systems, including high-efficiency MLP architectures and custom ASIC designs for optimized performance and power efficiency
He is Full Professor at FEI University Center (Centro Universitário FEI). The principal activities/research are developing new hardness-by-design devices (new layout styles for MOSFETs), sensors, and analog and radiofrequency CMOS ICs designs. He founded MTG2i Solutions Co., which provides analog and radiofrequency CMOS CIs and IPs design services using iMTGSPICE. This computational tool integrates the heuristics algorithms of optimization of the Artificial Intelligence and the expertise of the designers (Human Intelligence). Consequently, it significantly reduces the design and optimization cycle time, reducing the design cost to the companies.
A designer, a PhD, Who simply love Circuit design
University researcher
To obtain a challenging position as a VLSI Engineer in a reputable organization where I can utilize my skills and knowledge to contribute to the growth of the organization while also enhancing my own personal and professional development.
Experienced circuit and chip designer and design manager with major interest in low voltage low power analog design.
I am a professional in the field of Chip Design, Primary working on Synthesis, Physical Design, Static Timing Analysis and Physical Verification
Power electronics IC designer with in-depth experience in switched-capacitor and hybrid DC-DC converters.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. Hugo is an Analog/Mixed‐signal design engineer with strong background in IC design techniques, industry experience on ASICs for sensoring applications and hands on experience in 28nm, 55nm, 65nm, 130nm, 180nm and 0.35um CMOS process nodes. Research interests include Low power Data Converters, SAR ADCs, DACs, PLLs and Low power analog design.
A dedicated Physical Design Engineer aspiring to craft silicon for real-world applications.
Professor at the University of the Philippines Diliman.
I am into Analog and Mixed Signal designs. I have been involved in creating ASICs for 30 years.
ASIC Designer with experience in Back-end & Front-end stages for ASIC design flow.
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
I have recently completed a course in VLSI Design and Verification. During my training period, I have done two projects: Router Design and Verification and the second one is UART Protocol.
Adjunct Professor and Chief Mentor, Advanced VLSI Lab Silicon University, Bhubaneswar, India
I'm a BTech Electronics and Instrumentation graduate and an electronics enthusiast who was inspired by the open-source silicon technology and it's accomplishment and aim to build a career for myself in VLSI specifically as an ASIC Physical Design Engineer.
I am a research scholar in the Electronics & Communication Engineering department at the Indian Institute of Technology (IIT) Roorkee, Roorkee, India. My research area includes Analog/RF and Mixed signal circuit design, mainly focused on Phase Locked Loops (PLL).
Director - RTL Mfra Tech
I Vaibhav Neema presently working as Assistant Professor at Institute of Engineering and Technology, Devi Ahiya University , Indore , India.
Recent MSEE graduate from ASU specializing in Analog Circuit Design eager to contribute my knowledge and passion for designing innovative circuits. Bringing a solid theoretical foundation and a commitment to excellence. I am eager to contribute to cutting-edge projects.
Founder / director of SLICE Semiconductor, specialising in analog IC design contract services and high performance mixed signal ASIC solutions.
analog and power IC designer. multiple commercial projects experiences.
I am a highly skilled and motivated Integrated Circuit (IC) Designer with expertise in both schematic and layout design and verification. Throughout my career, I have played a key role in the development of multiple image sensor Readout Integrated Circuits (ROICs), from initial concept to final production. My key strengths include: • Schematic Design and Verification: I have extensive experience in designing and verifying top-level schematics and novel digital IP blocks for ROICs. I am proficient in using Verilog-A, PWL models, and SPICE netlists for comprehensive validation. • Layout Design and Verification: I possess a strong understanding of physical design principles and a proven track record of owning physical design for complex ROICs, including floor planning, top-level integration, and signoff. I have expertise in 3D IC integration and have developed reusable block-level layouts for various digital and analog IPs. • Design Enablement: I am passionate about creating efficient design flows. I have pioneered an open-source digital design flow and a TSV routing flow, established methodologies for 3D IC validation, and customized Calibre rules for advanced designs. I am a results-oriented individual with a keen eye for detail and a passion for innovation. I am proficient in various EDA tools and PDKs and possess excellent problem-solving and analytical skills. I am eager to contribute my expertise to a team that is developing cutting-edge imaging technologies
I am Taufiq Alif Kurniawan, Assistant Prof. in Department of Electrical Engineering, Universitas Indonesia. My research field is RF/analog IC Design. For full information, please access : http://staff.ui.ac.id/taufiq.alif
Cornell Tech ECE Master of Engineering Grad '24. Interested in startups and easier access to chip design and manufacturing!
Since 2001 I have worked for a small IC Layout design firm located in Wilsonville, Oregon called Coast-to-Coast Layout Design Inc. We provide full-custom mask design services to big semiconductor partners, both digital and analog/mixed-signal. I began my career as a part-time Linux systems administrator, and was taught mask design by my mentor and boss, then over the past couple decades I moved up the ranks to my current GM position where I am responsible for most day-to-day operations and management of multiple mask design teams who are very highly valued by our customers that rely on our services to meet tough tapeout schedule and quality requirements. I'm here because I'm planning to use open-source EDA tools to help train new mask designers to help grow my company.
As a VLSI enthusiast, I completed a 6-month internship as a NAND product engineer at Micron Technology where my work comprises of post-silicon validation, data analysis using JMP, and testing NAND components under varying PVT conditions in DDR3 and LPDDR4. I'm passionate about CMOS and have experience simulating NAND output drivers through HSPICE simulations in collaboration with the design team. Additionally, I have proficiency in System Verilog, RTL design, and a solid grasp of digital IC, analog IC, and physical design. I hold a master's degree in Microelectronics from BITS Hyderabad and a bachelor's degree in ECE from Gayatri Vidya Parishad. I achieved a GATE ECE score of 571 with an All India Rank (AIR) of 1404 in 2023. devadeepreddi20@gmail.com
Experienced ASIC Digital Design and Physical Implementation Enthusiast
