Efabless Logo

Tag Search

"profiles" search for "area_of_expertise": Circuits

Number of Results: 844

Vernon Greer

Analog IC Design Engineer with considerable expertise in mid-­ to high-­frequency transistor­-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board­- and wafer­-level, test automation, and simulation scripting.

Bhawandeep Singh

Linkedin - https://www.linkedin.com/in/bhawandeep-singh-1b164517/ PhD student in CSE department in UCSC, advised by Prof. Jose Renau. My areas of majors are CPU design, digital design and embedded software.

Ahsan Ali

Passionate Electrical Engineer with interest in computer architecture and SoCs.

Alex Tsamakos

Skills

C/C++

Area of Expertise

Circuits: Sensors

Konrad Beckmann

Embedded developer with some FPGA and PCB CAD experience.

Takehisa Konda

semi retired, small startup for Medical (oncology/treatment) system, analog circuit designer, College Lecturer, Surfer&moto Rider.

Murat Ozbas

Analog systems and circuit design engineer with extensive product development and applications experience with a strong focus on end markets. Proven ability to work closely with a diverse set of customers and clients to properly specify the requirements of a mixed-signal ASIC. Ability to manage product development from foundry selection through design, tape-out, and mass-production.

Klas Nordmark

Digital designer and embedded software developer. Experience from telecom and computer vision.

Shah Sharif

I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.

Hiroshi Heinai

I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.

Marcus N

System and database administrator, embedded systems hobbyist.

Amr Walid

Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.

MBreithaupt

Electrical engineer, who likes to figure out new stuff

Chris Burgess

Hobbyist maker interested in general electronics, with experience designing and fabricating custom circuit boards. https://tindie.com/stores/cburgess129

Federico Paredes

Digital designer experienced in high-speed ASICs for optical/copper transceivers, including DSPs, error correction and SoC support.

Martin Baudino

I am an Electronics Engineer with experience in IT Management, Firmware Development and Education. I spend my spare time looking for interesting projects and reading about technology trends.

Paulo Roberto Bueno de Carvalho

Paulo Roberto B. de Carvalho is a Hardware and Digital IC Design Engineer with 6-years experience in microelectronic area in Digital IC Design, with specialization in RTL design optimization for area and power reduction, Verification and Physical Implementation flow. He has 10-years experience in Application Engineering, technical consultant and semiconductors manufacture processes. He received his bachelor degree in materials, processes and electronic components technology at Faculdade de Tecnologia de Sao Paulo (FATEC-SP) in 2006. In 2011, he joined the Brazillian Federal Government IC Brazil Program of the Ministry of Science, Technology and Innovation (MCTI), trained in Digital Systems Design area. He received his Master of Science degree in Electric Engineering with specialization in Microelectronic area on Integrated Systems Laboratory at Electrical Engineering Department of Polytechnic School of University of Sao Paulo in 2016.

Bob Ledzius

35 years mixed signal SoC, ASIC, and FPGA design and management experience. Concertal provides rapid functional IP integration using proprietary System Design Automation technology that includes delivery of RTOS capable fabric that supports loosely coupled HW operation including IP NbC (Network beyond the Chip). IP areas of expertise include common interfaces, data converters, modulators, digital filters, DSP, processors, FSM, and other custom specified functionality.

Ambati Venkata Reddy

working as a analog design engineer in Cadence Benguluru(India)

Steph Pienaar

Embedded Systems Designer

Skills

C/C++

Area of Expertise

Circuits: Microcontrollers

ardencaple

Semiconductor professional with 40 years experience. I act as a technical consultant, design consultant, or architect for SoCs, embedded systems etc.

Dhiraj Jayaprakash Poojary

Hi , I am Dhiraj Poojary , Analog Design Engineer by profession and looking to learn something here !!

Vishal Prafulkumar Katigar

Trained in ASIC verification from Maven silicon Bengaluru Also having experience in embedded domain (PCB layout design)

Marco Merlin

Electronics Engineer with 10 years experience in microelectronics and research. Familiar with CMOS integrated circuits design, wireless communication systems, programming and lab environment, I am comfortable working for worldwide semiconductors firms. Passionate for high-tech and music, advocate for teamwork and collective intelligence to support a strong problem-solving methodology, I am curious, self-motivated, addicted to learning and re-shaping the new technologies I am exposed to. During my workday I aspire to address "real-life problems", hopefully continuing to develop my multi-disciplinary skills as a means for technical and personal enrichment.

Dejan Mirkovic

Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.

James Swonger

"Lifer" IC designer focused on analog and power management for applications you don't want to know about

Saul Rodriguez

I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.

Alexey Shabalovskiy

Expert in embedded and mobile applications since 2003. Has many years of experience in software and hardware development, effective team management. Excellent in the research and development, technology findings and implementations.

Irfan Awan

Skills

VHDL

Area of Expertise

Circuits: Microcontrollers

MAYANK VASHISHT

Interested in Design, Verification, and Hand-off of Analog IPs. Worked on the definition, modeling, design, verification of DC-DC converters, Chargers, Ideal-Diodes, LDOs, Regulators, Bandgap references, Current limiting and sensing architectures. Excited for challenges in Analog Design, Layout and Post-silicon verification.

Rod

I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.

David Garner

An experienced mixed-signal IC design engineer / design manager with over 25 years experience. Has design and led the design of multiple mixed-signal ICs through to tapeout and silicon verification. Also experienced with the delivery of IP blocks. Worked across multiple market sectors.

Murat Eskiyerli

I am an experienced semiconductor expert with twenty years of experience both in top semiconductor companies such as Sony, National Semiconductor, Analog Devices, and Cambridge Silicon Radio and much smaller companies such as Pericom and Theta Microelectronics. I designed high-volume products for customers including Quantum, Western Digital, Hewlett-Packard and Nokia. I also acted as an expert evaluator for European Union H2020 framework project calls and EURIPIDES research frameworks. Specialities: CMOS/BiCMOS, SOI CMOS analogue and radio-frequency integrated circuit design: Millimetre-wave phase shifters, vector modulators, attenuators, Phased-array transceivers, LNA (Bluetooth, FM, 802.11n) Mixer (100MHz to 4GHz) Limiting Amplifiers for optical communication circuits, Transimpedance Amplifiers, Low-power RF Amplifiers Hard-disk preamplifiers, Clock and Data Recovery (CDR) circuits, High-speed output drivers (CML), Sigma-delta converters. Xtal Oscillators, Ultra-low power CMOS circuits for RFID transponders CMOS RF-DC Energy Harvesting circuits

Hervé Pierre

Research engineer and teaching assistant in microelectronic, microsystems and bioelectronic at the university of Liège, Belgium

Baker Mohammad

Experienced leader of industry and academia focusing on developing customized hardware accelerators for low power mobile, AI and IoT devices. Over 20-years hands-on experience in all aspects of SOC and processor design. Specialties: memory design (SRAM, regfile, CAM), VLSI design for best Power, Performance, and Area (PPA) design point. Power management and power conversion including dc/dc and ac/dc. Computer Architecture and Hardware accelerator using In-Memory-Computing and Emerging Technologies (RRAM)

Shahbaz Abbasi

Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.

Khaled Zaki Ahmed Hussein

MSC in Electrical Engineering BSC in Electronics Two patents in mathematical software in Engineering design and digital signal processing utility box Undergo private research for commercial use in the areas of very high frequency analog and digital circuits

Miguel Ramirez Fuentes

Self-taught Electronic Engineer with a lot of experience in programming. I consider myself creative, analytical and dynamic, through my studies I have developed the ability to face and lead changes; I am interested and committed to continuous improvement in a globalized world, both professionally and personally. Being able to contribute what I have learned and add value, thus learning from the opportunities in today's working world.

Daniel Limbrick

I am currently an Associate Professor in the Electrical and Computer Engineering Department at North Carolina Agricultural and Technical State University (NC A&T). As director of the Automated Design for Emerging Process Technologies (ADEPT) laboratory at NC A&T, I research the following questions: (1) how can we make computers more reliable in harsh environments (i.e., ionizing particles, malicious fault injection) and (2) how can we extend Moore’s law (e.g., 3D IC)? To answer these questions, he interrogates the traditional abstraction layers of integrated circuit design (i.e., functional description, circuit design, physical design) to discover design methodologies that are more relevant to these goals.

Konrad Rzeszutek Wilk

I am enthuastic engineer who has been doing software engineering (Linux kernel), electronics, and now chip designs. My day job is leading teams (senior director) focusing on virtualization and security.

Larry Pearlstein

ASIC architect and designer. Specialize in deep learning, video, image and signal processing, and compression. Professor of Electrical and Computer Engineering at The College of New Jersey.

Scott XING

Prof./SMTS/Research Fellow/Scientist

Skills

Verilog

Area of Expertise

Circuits: Memory

Paulo Marcio Moreira e Silva

Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.

Bo Feng

Analog IC designer

João Silva

PhD Student Research on Integrated Sensor Interfacing Systems featuring signal conditioning and A/D conversion. Functional blocks developed: VGA, current-steering DAC, SAR ADC, AA Filters, SPI master/slave.

Nishit Nathwani

I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/

Arsaki Ken

i ameverpoor

Skills

id

Area of Expertise

Circuits: Filters

Nuh Nar

I just finished electrical and electronics engineering. I want to develop myself in the semiconductor field

Amro Tork

More than 14 years of experience in Electronic Design Automation roles with leading industry companies like Intel, Samsung and others. Have a strong background in EDA best practices and technologies like DRC, LVS, XRC, PERC and others. Have a mixed background in circuit. design, data science and programming with emphasis on data analysis for microchip design. Have strong background leading project deliveries to fortune 100 companies in the world. B.Sc. in Electrical Engineering from faculty of Engineering, Ain Shams University, Cairo, Egypt.