Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
Analog full custom design experience of Low power VOltage regulators, Bandgap reference, calibration circuits and common mode receiver. worked on SERDES IP (up to 12Gbps) compliant with USB 3.1 and SATA protocols. AS ESD ENgineer for SERDES IP Improved existing ESD network simulation strategy and ESD network for robust ESD performance reliability and automated existing current density flow for ESD for better efficiency. Technology Nodes: 14nm(FINFet), 28nm(FDSOI) 28 nm,40nm,90nm,180nm (Bulk)
i'm expert analog mixed signal IC design engineer 7 years experience
I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.
Principal Engineer at ONiO AS
Engineering Consultant with 20 years of experience in RF and Analog Circuit Design
Electronic Engineer from the Federal University of Santa Catarina (Brazil). Master in Electrical Engineering from UFSC (thesis title: CMOS Ultra-Low-Voltage Ring Oscillators). Interested in the areas of Sensors, Ultra-Low Power Circuits and MOS modeling.
I have done my undergraduate in Electronic Engineering. Right now I am doing MS in Electrical Engineering(Specialized in IC Design) from NUCES FAST, Islamabad.
Fresher interested in asic physical design and looking for job opportunities in physical design engineering
An electronics and communication engineering student with a great passion for RF and analog design.
Computer Engineering Student and hardware design enthusiast. Enjoys programming and soldering.
Kamala J. received her B.E. degree in Electronics and Communication Engineering from Madurai Kamaraj University in 1989, M.E. degree in VLSI Design from Bharathidasan University, in 2002 and Ph.D from Anna University, Chennai, Tamil Nadu, India in 2011. She is currently working as Associate Professor in the Department of Electronics and Communication Engineering, Anna University, Chennai, India.
I am Dr. Naushad Alam working as an Associate Professor in the Department of Electronics Engineering, Z H College of Engineering & Technology, Aligarh Muslim University, Aligarh, India. I received B. Tech. degree in Electronics & Communication Engineering from Jamia Millia Islamia, New Delhi in 2003, and M. Tech. Degree in Electronic Circuits & Systems Design from Aligarh Muslim University, Aligarh in 2009. I earned Ph.D. degree in Microelectronics from Indian Institute of Technology Roorkee, India in 2013. My doctoral work was on nanoscale circuit design considering the impact of process-induced mechanical stress. He has published 29 papers in SCI indexed journals that include 10 IEEE Transactions and 33 papers in reputed conferences. I have supervised two PhD thesis in the area of device-circuit co-design and presently supervising two more PhD students. I have also successfully executed a UGC funded research project on TFET based SRAM cell design for IoT Applications. My research interests include device-circuit co-design, robust nanoscale circuit design, low power circuit design, PVT tolerant circuit design, Near-Threshold/Sub-Threshold circuit design etc.
Provides mixed-signal CMOS training to academia using open-source tools and also solution for the consumer and automotive industry.
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.
My name is Sunil Parmar, I have done a master from IIT-Bombay in 2005 and a bachelors from Gujarat University in 2003. After post-graduation, I joined a service company in Hyderabad and later worked with Intel Bangalore. I have worked with the Samsung R&D center in South Korea for Silicon photonics applications and later contributed in Samsung's DDR4 memory IO design. As an employee, I have published few patents and papers. In 2016, I returned to India with a very ambitious goal to set up a semiconductor product company called Powency Circuit Private Limited in the power management domain. In between, After Covid, I decided to develop a MEMS Microphone product and started a project called Sikern. We are currently a small team having three design engineers, one packaging expert and one management staff. We are working with a Japanese supplier and a Malaysian packaging group for our product development. And developing our own ASIC for this MEMS microphone. We started working with a smartphone customer in India for their upcoming mobile model. And hope to work with many more customers within India as well across the globe for our Microphone product.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
I am really interested in Research for progressing my work in RF electronics
I love to learn and make things. RF, power electronics and AI/ML get me really wondering, what could we do with all of them.
Learning to build brain-inspired Neuromorphic chips. I used to wrestle with GPUs for graphics and AI. Previously at Unity Technologies and Electronic Arts.
I am a computer engineer with 8 years experience in developing and deploying innovative solutions in the following areas: Analog, digital, embedded systems, network infrastructure and Internet of things (IoT) hardware (PCB and firmware programming), Phonotaxic pest control systems, bioelectronics for detection of volatile organic compounds of infectious diseases, Monitoring, evaluation and process control, Artificial intelligence, machine learning, deep learning and computer vision. Robotics and drones If you want to build, design, repair, maintain or integrate any kind of hardware, feel free to DM. I also do product management and development of all kinds of softwares including those you think can’t be done in Nigeria. If you need help for any project you’re working on, including academic projects just contact me and I would to assist to the capacity which my spare time can allow, you don’t have to pay if you are a member here.
