I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
I am Electronic Engineer from Chile, I like DSP and radioastronomy applications an ordinary guy
Mad Scientist
Engineering Consultant with 20 years of experience in RF and Analog Circuit Design
Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
I'm a double-degree PhD candidate at University of São Paulo and Communauté Université Grenoble-Alpes with experience in analog/RF design and layouting at integrated technologies and interposers, with experience in slow-wave devices.
Experienced Senior Design Engineer with a demonstrated history of working in the electrical and electronic manufacturing industry. Skilled in DAC, SPICE, ADCs, Electronics Hardware Design, and Management. Strong engineering professional with a M-Tech focused in VLSI System Designs from Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering &Technology and also a B-Tech Degree in the field of Electrical, Electronics and Communications Engineering from Mahatma Gandhi Institute of Technology.
Semiconductor professional with 12+ year experience in ASIC hardware design and methodology development. Main expertise is in chip STA signoff - top level, IO timing, High speed design timing, and good knowledge of RTL design, Physical design (Layout, CTS, Route, DRCs), Synthesis and Formal Verification. Have also completed business management studies and looking for interesting opportunities in chip product development and management.
I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.
I am Dr. Naushad Alam working as an Associate Professor in the Department of Electronics Engineering, Z H College of Engineering & Technology, Aligarh Muslim University, Aligarh, India. I received B. Tech. degree in Electronics & Communication Engineering from Jamia Millia Islamia, New Delhi in 2003, and M. Tech. Degree in Electronic Circuits & Systems Design from Aligarh Muslim University, Aligarh in 2009. I earned Ph.D. degree in Microelectronics from Indian Institute of Technology Roorkee, India in 2013. My doctoral work was on nanoscale circuit design considering the impact of process-induced mechanical stress. He has published 29 papers in SCI indexed journals that include 10 IEEE Transactions and 33 papers in reputed conferences. I have supervised two PhD thesis in the area of device-circuit co-design and presently supervising two more PhD students. I have also successfully executed a UGC funded research project on TFET based SRAM cell design for IoT Applications. My research interests include device-circuit co-design, robust nanoscale circuit design, low power circuit design, PVT tolerant circuit design, Near-Threshold/Sub-Threshold circuit design etc.
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Professor, Department of Electrical and Computer Engineering Research Interests: Non-volatile Memories, solid state imaging systems, low power microelectronics, microelectronic process technology
Known since I was 12 years old that I wanted to be an electrical engineer, by the time I was like 14 or 16 years I knew that I specifically wanted to design microprocessors. I officially became an electrical engineer by graduating with a B.S.E.E. along with a minor in Business from N.C. State University. With more than 30 years of industry experience, I look forward to bringing some of my own original ideas and visions into reality and I am very much tapped in the entrepreneurial spirit while also be an advocate for Open Source projects, both Software and hardware based, along with being a super advocate for the Agile movement for all engineering disciplines, i.e. beyond it just being a thing software folks do!
Principal Scientist at Octave Photonics
Estudiante de la Universidad nacional de Cordoba de la carrera de ingenieria Electronica investigador en sistemas embebido y programacion y microelectronica
A human being, professional in microelectronics and telecommunications, passioned about electronics, open source, and music.
I have over thirty years of experience in the semiconductor industry, having worked in fab, EDA and design engineering. have built and led large, geographically distributed teams at a senior manager level. I am passionate about developing talent and skills, particularly in young people from socio-economically underprivileged backgrounds.
Hi , I am Gajanan Chavan I am a passionate individual with a deep love for computers. My skills encompass C++, HTML, CSS, Bootstrap, Python programming, and data structures. Currently, I am pursuing a degree in Electronics and Telecommunication at SGGSIE&T in Nanded, Maharashtra. My goal is to continuously enhance my knowledge and expertise in the field of computer science and contribute to innovative projects and solutions. I am eager to connect with like-minded professionals and explore opportunities that allow me to apply my skills and contribute to the ever-evolving world of technology.
Leader of a quantum hardware engineering team. Quantum hardware engineer, IBM quantum administrator/ developer, carpenter from the countryside in northern Arizona.
Renatus N.K, CEO of Wolinet Tech, leads in AI, cybersecurity, and digital solutions, tech skills and driving innovation across industri
He/Him High School Student Just a regular student who is doing things impulsively (more like out of boredom).
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
My research interests include systematic circuit synthesis techniques, modeling and simulation of linear and nonlinear circuits and systems, design and applications of fractional order chaotic oscillators, multi-objective optimization, evolutionary algorithms, and analog and mixed-signal design automation tools.
I am a student of electrical and biomedical engineering at Arusha technical Collage in Tanzania
i am student and electronics is my hobbby
