Aspiring analog IC designer
I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.
Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.
35 years mixed signal SoC, ASIC, and FPGA design and management experience. Concertal provides rapid functional IP integration using proprietary System Design Automation technology that includes delivery of RTOS capable fabric that supports loosely coupled HW operation including IP NbC (Network beyond the Chip). IP areas of expertise include common interfaces, data converters, modulators, digital filters, DSP, processors, FSM, and other custom specified functionality.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. He was Mixed Signal IC designer at LSITEC and DFCHIP (Brazil) where worked for 8 years, and Pos-doc of the Universidad de Sao Paulo in collaboration with ALICE-CERN as analog IC designer in the SAMPA ASIC project. He was Adjunct Professor of the Control and Automation course at the Engineering Institute (CUVG) of UFMT for 2 years. He is currently Adjunct Professor of the Department of Electrical Engineering of the Federal University of Minas Gerais (UFMG).
Mad Scientist
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
Aspiring IC Design Engineer
PhD Student Research on Integrated Sensor Interfacing Systems featuring signal conditioning and A/D conversion. Functional blocks developed: VGA, current-steering DAC, SAR ADC, AA Filters, SPI master/slave.
Engineering Consultant with 20 years of experience in RF and Analog Circuit Design
Planning to enter a master's degree program in 2023. Currently employed in consumer product manufacturing. Personal project experience in embedded systems, digital verification, and RTL for FPGAs.
Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.
Current iOS Programmer, EE with decade of physical design experience in mixed signal - worked on POWER architecture PLLS.
I'm a double-degree PhD candidate at University of São Paulo and Communauté Université Grenoble-Alpes with experience in analog/RF design and layouting at integrated technologies and interposers, with experience in slow-wave devices.
Professor for microelectronics
ECE Undergraduate Student @ Guru Gobind Singh Indraprastha University
Analog VLSI Design Enthusiast
Im designated as a lab engineer at Fast NU Isl. My area of expertise is analog and Rf ic design.
I have been a Professor in The Dept. of Electronics and Communication, College of Engineering, Guindy (CEG), Anna University, Chennai, India and I have retired last year after being on the faculty of this University for twenty eight years. I continue to teach courses as a Guest Faculty in the same Dept. at CEG, Anna University in the areas of Analog, Mixed Signal, RF and Communication Systems and IC Design. I have supervised student teams in building Small Satellites (Avionics subsystems) and also CMOS IC Designs. I have also supervised Masters and Doctoral thesis in the areas of GPS (baseband), uP Clock PLLs and CDRs, RF LNAs, and resonant sensors.
RF/Analog IC design and SOC
I am a senior researcher at Nokia Bell Labs. I am specialized in the design of RFIC and mmWave IC.
Analog and rfic design professional working since 1997 , Mainly products on wireless ic design, development and testing. mobile, bluetooth, wlan, uwb, rfid , zigbee chips. blocks receiver, transmitter, pll, ldo, mixer, lna, pa, switch , pmic,
I am the founder of Aurifex Labs LLC. I have a degree in EE and have a strong interest in computer architecture, but have been a software developer/entrepreneur professionally. I also have a little audio DSP background. I created Prospero.Live, a collaborative software development platform.
Esmaeil NAJAFIAGHDAM was born in Zonouz, Iran, in 1964. He received the B.E. degree from University of Sistan and Baluchestan, Zahedan, Iran, in 1990, and the M.S. degree from Amir-Kabir University of Technology, Tehran, Iran, in 1994, both in electronic engineering. In 1995, he joined the Department of Electric Engineering at Sahand University of Technology, Tabriz, Iran, as a Lecturer. In 2002, he started his PhD program dealing with a high-performance bandpass Delta Sigma ADC. The research program is directed by Prof. P. Benabes at SUPELEC, France. Esmaeil NAJAFI AGHDAM is now a Professor at Sahand University of Technology. His current research interests include mixed mode electronic circuits, Delta Sigma Converters, RFIC design, Ultrasonic circuits and Electronic measurement.
An electronics and communication engineering student with a great passion for RF and analog design.
fresh. grad electronics and communication engineering minia university advanced analog CMOS circuit design
Kamala J. received her B.E. degree in Electronics and Communication Engineering from Madurai Kamaraj University in 1989, M.E. degree in VLSI Design from Bharathidasan University, in 2002 and Ph.D from Anna University, Chennai, Tamil Nadu, India in 2011. She is currently working as Associate Professor in the Department of Electronics and Communication Engineering, Anna University, Chennai, India.
Professor for electronic circuits at Karlsruhe University of Applied Sciences in Germany since 2020. I received the Dipl.-Ing.(FH) degree from the Karlsruhe University of Applied Sciences, Germany in 2005, and the Ph.D. degree in mechatronics from Johannes Kepler University Linz, Austria, in 2014. From 2005 to 2009, I worked as an IC designer at Bosch GmbH in Reutlingen. From 2009 to 2015, I was a research assistant at Johannes Kepler University Linz. In 2015, I headed the mm-wave wireless research group at IHP Microelectronics. I have authored and coauthored more than 100 journal and conference articles. I received the 2018 VDE ITG-Prize and the 2019 APMC best paper award for his outstanding works on integrated mm-wave radar transceivers in SiGe BiCMOS technologies.
Graduate student passionate about integrated circuit design for biomedical applications
I am a avid analog-RF mixed signal designer. Currently I am experimenting with novel design techniques using open-source tools.
MS in IC Design Fellow, RFCS2 lab at FAST-NU Islamabad, Pakistan
I am a EE with decades of experience in multiple disciples including analog, RF, bio-engineering, embedded systems design, ... a long list. I've had a long career and am fortunate to be able to follow my interest where ever they might be.
IC designer with more than 25 years post Ph.D. experience. Specialising in RF, RFIC, analog and mixed-signal. Wide experience in Architecture, system and circuit design. RF front-end module design for cellular with CMOS PA. Over 40 patents issued.
An enthusiast of the Open Source World.
Digital Systems and Software Engineer (formerly in management VP and Director of engineering).
I started my passion a year ago, I was supposed to do my radio-ham license but it has been postponed. So in the meantime instead of just waiting I started to learn about signal processing. I bought an SDR, built my antenna a (double cross), then I bought a yagi 70cm - 2m. I also designed my upconverter to be able to get a bunch of different ranges that my SDR would not catch. I'm now building a cubesat Simulator. Using a raspberry pi and an STM32.
working as a assistant professor in the department of ECE ICFAITECH
RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.
Hello, my name is Usama Ishfaq. I am an electronics engineer with expertise in IC design. With years of experience in the industry, I have developed a strong understanding of the complexities involved in designing and developing integrated circuits. My passion for electronics and technology has driven me to constantly learn and innovate, ensuring that I stay up-to-date with the latest advancements in the field. I take pride in my ability to work collaboratively with teams and clients to deliver high-quality solutions that meet their specific needs. Thank you for taking the time to read my introduction.
I am a professional in the field of Chip Design, Primary working on Synthesis, Physical Design, Static Timing Analysis and Physical Verification
A PhD student working in WEST (Wireless Environmental Sensor Technology) Lab with a focus on Analog IC design.
Microwave/RF Electrical Engineer. Love learning new things.
Experienced in software engineering and offensive cybersecurity, I specialize in wireless networking security, cellular communication security, and cryptanalysis. Proficient in C, C++, and Python, I excel in scripting and automation. Currently delving into embedded system design, focusing on FPGA and ASIC.
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
I love to learn and make things. RF, power electronics and AI/ML get me really wondering, what could we do with all of them.
I am a research scholar in the Electronics & Communication Engineering department at the Indian Institute of Technology (IIT) Roorkee, Roorkee, India. My research area includes Analog/RF and Mixed signal circuit design, mainly focused on Phase Locked Loops (PLL).
