im a student who want learn design VHDL
Silicon Design Engineer
Aspiring analog IC designer
semi retired, small startup for Medical (oncology/treatment) system, analog circuit designer, College Lecturer, Surfer&moto Rider.
Teacher/researcher at the Electronics Department (DEEC) of Universidad Nacional de Tucumán, Argentina
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.
Electrical engineer, who likes to figure out new stuff
I am a Master Degree holder in VLSI Design. I am interested in Analog Circuit Design.
MSEE, Instructor (teaching undergraduate electrical and general engineering coursework including Introduction to Integrated Circuit Design, mentoring for local Society of Women Engineers chapter)
I am an electronic hobbyist who enjoys building different electronic circuits and systems.
Students in Introduction to IC Design Course working on an Encryption design for a class project
Principle Engineer at efabless corporation
Professor in Electronics Engineering with a PhD. in VLSI (Universidad Nacional de Mar del Plata). Expertise in digital RTL and physical design. Experience in FPGA RTL and HLS design for heterogeneous computing. Knowledge in sub-threshold analog design. Fiction writer (National Literature Award for Novel, 2011, Costa Rica)
Research engineer and teaching assistant in microelectronic, microsystems and bioelectronic at the university of Liège, Belgium
30+ years of experience ranging across telecom, embedded systems, semiconductor, firmware development.
Self-taught Electronic Engineer with a lot of experience in programming. I consider myself creative, analytical and dynamic, through my studies I have developed the ability to face and lead changes; I am interested and committed to continuous improvement in a globalized world, both professionally and personally. Being able to contribute what I have learned and add value, thus learning from the opportunities in today's working world.
Virginia Microelectronics Consortium (VMEC) Professor in the ECE Department at the University of Virginia
I am enthuastic engineer who has been doing software engineering (Linux kernel), electronics, and now chip designs. My day job is leading teams (senior director) focusing on virtualization and security.
Masters in "Integrated Circuits & Systems" focused on Analog / Mixed Signal System/ IC design
Still an entry-level electronic engineer. Absorbing and practising information and knowledge. Just for curiosity and fun.
Researcher and Professor at the National University of Córdoba, Argentina. Actual Research areas: microelectronics, embedded systems, Digital Signal Processing
I am a PhD student and faculty member in Electrical Engineering Department at Air University Islamabad Kamra Campus.
Graduate research assistant at the University of Mississippi
My name is Andrew Jones and I recently graduated from Erie Community college with a certificate in the mechatronics field.
Experienced PCB/Package Layout Engineer with an extensive experience in EDA automation using SKILL python powerscript
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
Hardware Systems Architect at AroLeap
Engineer: Electronics, Software, Firmware, Applications, PCBs, Chips. Business owner, consultant.
I am a Graduate student pursuing my master's in Computer Engineering. I am interested in VLSI projects.
Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.
Just another big dreaming engineer with a desire to learn silicon microfab
Analog design engineer with 3+ years of experience in the analog/ mixed signal design, verification and lab validation.
I am an Electrical and Computer Engineer. I run an engineering, design and manufacturing firm in Milpitas, CA. We design and manufacture various electronic products, including image sensors and image processing compute hardware.
I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.
I am hager mohamad diff allh, from faculty of engineering-MINIA university (Electrical engineering department).
Kamala J. received her B.E. degree in Electronics and Communication Engineering from Madurai Kamaraj University in 1989, M.E. degree in VLSI Design from Bharathidasan University, in 2002 and Ph.D from Anna University, Chennai, Tamil Nadu, India in 2011. She is currently working as Associate Professor in the Department of Electronics and Communication Engineering, Anna University, Chennai, India.
I am an Electronics Engineer now continuing my MS in electronics from COMSATS Abbottabad in Analogue Chip Design.
Looking for an internship opportunity in VLSI or the semiconductor industry. Hey, Welcome to my page I'm Rishabh Verma, a pre-final ECE undergrad, who has a keen interest in the VLSI domain. I love to design and simulate circuits. Till now I have participated in two circuit design hackathons. One of them was "Mixed-signal Circuit Design and Simulation Marathon Using eSim" organized by FOSSEE Team IIT Bombay, in which my design was ranked under the "Outstanding" category with a cash prize of INR 10,000. I have hands-on experience with the simulation tools like Synopsys Custom Compiler, eSim, Vivado, Pspice, and LTspice. I have also done layout designing and parasitic extraction of some basic logic functions using the ELECTRIC VLSI system design tool. Done DRC and LVS. I'm also familiar with the FPGA flow. In my 3rd year, I have done the implementation of a Robotic Arm controller using the FPGA. Verilog HDL was used to code the algorithm. Currently, I'm working on the " AQI estimation " using Image processing on FPGA. You can check my projects on my Github, the link is provided in my resume or in the website section of my profile. Feel free! to reach out to me if you are doing some cool stuff on FPGA or something related to VLSI and Circuit design.
I have an expert in the PCB design area. I am interested for analog design and chip design
D Gracia Nirmala Rani received the B.E. degree in Electronics and Communication Engineering from Syed Ammal Engg College, Madurai, India, in 2004, and M.E. degree in VLSI Design from Karunya University, Coimbatore, India in 2007. She has awarded Ph.D. degree in VLSI Design from Anna University, Chennai India in 2014. She is working as an Associate Professor in Thiagarajar College of Engineering, Madurai since 2007. She teaches courses on system/digital and analog electronic design and VLSI processor architectures. Currently, five research scholars are doing their research under her guidance. She has authored or co-authored 42 international journal and conference papers like IET Circuits, Systems and Devices, Spinger, Wiley and Elsevier Publications. Also she has published 3 Books/Book Chapter in Springer LNCS and CCIS Publications. She has filed 2 Patent in BioMedical Engineering Field. She has guided the B.E students’ project which won the India Cadence Design Contest Award 2017 and 2018 instituted by Cadence Design System Pvt Ltd, Bangalore. In 2018, she was the technical program chair of the 22nd International Symposium on VLSI Design and Test. She is serving as a reviewer in IEEE Transaction on Nanotechnology, Elsevier and Inderscience Journals, respectively. Her research interests include RFIC Design, Physical Design Automation, Optimization Algorithms using Machine learning for IC and mixed signal circuits and systems for Bio-medical Devices.
electronic system designer / software and hardware engineer, embeded system expert, signal expert, proccess designer, researcher, Developer of complexity and reversal wantings. Reverse engineer. i addopt my whole life to this science. thank you for presentings of quantum, psych
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Hi, I'm a student at UACJ and I like integrated circuit designs.
Engineering Electronic student of National University of Cordoba (UNC), Argentina. Active member of Robust Circuits and Systems Laboratory (LCSR), in exact and natural sciences faculty (FCEFyN).
Analogue Circuit Designer
Graduate equipped with a Bachelor of Engineering in Electronics and communication with a concentration in Semiconductor and VLSI design with hands-on experience in CAD tools and to join a reputable organization to begin a fulfilling, lifelong career.
Associate Professor in Electrical and Computer Engr. Dept. Teaching and Research in Microelectronics. Teaching interests are in both discrete and integrated electronics, both for undergraduate electronics labs and projects and graduate integrated circuit design, verification, prototype, and test.
I am an electronic engineering student about to graduate from Facultad de Ciencias Exactas, Físicas y Naturales in the Universidad Nacional de Córdoba, Argentina. As part of the supervised professional practices I'm working on analog design with free software tools and the efabless platform in the LCSR
Lecturer, Department of Electrical Engineering Institut Teknologi Sepuluh Nopember INDONESIA
I'm a Senior Researcher at the Barcelona Supercomputing Center and Junior Faculty at Polytechnic University of Catalonia (UPC). I'm the recipient of the RISC-V Educator of the Year Award 2019, for the advanced graduate course Processor Design I'm teaching at UPC, which is focused on the design of high-performance safety-critical systems. I'm the PI of the GPU4S project funded by the European Space Agency (ESA) in which we are investigating the applicability of embedded GPUs in space.
I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.
Gentlemen: I have a professional background in the automotive industry, working in production management, IT and logistics where I worked as a technician, supervisor, coordinator and manager, which allowed me the following experiences: 15 years in the automotive industry, managing production and industrial logistics, planning, scheduling and production control in serial and batch production lines. With experience in dimensioning, planning and implantation of a manufacturing unit with productive start and logistics transfer without production losses. 20 years in IT management, in a soft house in the implementation, parameterization and maintenance of ERP Management projects (programming, database and systems analysis), maintenance and specification of electrical equipment, materials and systems. 4 years ago I started working with maintenance of electronics, commercial, industrial equipment , hospital, motors and transformers. Study and implementation of projects in the electrical discipline for overhead and underground networks, electrical infrastructures in residential, commercial, industrial works and maintenance of equipment in the electronics laboratory. Research and development of Brain-Machine Interfaces. As a form of relaxation and leisure, I developed an aptitude for fine arts where I have worked as a draftsman, painter, sculptor and modeler for over 20 years. I have mastery of Project Management methodology, knowledge in several SAP systems, in addition to Advanced Office package
M. Pardo (Senior Member, IEEE) received the B.S. degree in electronics engineering from Universidad del Norte, Barranquilla, Colombia, in 2002, and the M.Sc. and Ph.D. degrees in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, USA, in 2007 and 2012, respectively. He is currently an Electronics and Electrical Engineering Department Graduate Programs Coordinator with Universidad del Norte and leads the electronic analog design area. His research interests include the areas of oscillators, energy harvesters, and renewable energy systems.
Hi I'm a MASc Student at University of Toronto. My research focuses are FPGA architecture, DL Acceleration, Heterogenous devices and CAD tools.
As an experienced Electronic Engineer with a solid foundation in FPGA design, embedded systems, and IoT, I specialize in high-level hardware programming and real-time signal processing. With expertise in RTL, RISC-V, Verilog, SystemVerilog, and VHDL, I bring a robust understanding of digital design to my work. My professional background includes over a decade in the PCBA assembly industry, where I programmed and configured SPI and Chip Mounter machines, managed production processes, and handled CAD and Gerber files for precision assembly. Additionally, I am well-versed in designing and testing complex circuits using tools like Proteus, Fritzing, and Altium, with a particular interest in the emerging role of AI in electronics. As a career coordinator, former educator in electronics, and an active researcher, I blend practical industry experience with a passion for fostering innovation and teaching in the electronics field. My recent projects involve integrating IoT with embedded solutions, exploring the intersection of FPGA technology with real-time applications, and continually expanding my knowledge in artificial intelligence.
I'm a Graduate Research and Teaching Assistant at Oregon State University.
Leader of a quantum hardware engineering team. Quantum hardware engineer, IBM quantum administrator/ developer, carpenter from the countryside in northern Arizona.
FPGA/HW engineer
In the electronic age, privacy is our shield — allowing us to reveal ourselves by choice. As the musica universalis guides the universe in harmony, so should our creations. Let's ignite a new Renaissance, driven by humanism and curiosity, a harmonised future of automated world, echoed with the music of human potential. 一期一会
CSE Professor at the University of Notre Dame
Experience in the area of electrical engineering, with an emphasis on analog circuit design.
I am a Computer Engineer at the University of Notre Dame, with minors in Innovation and Entrepreneurship and Corporate Engineering Practices. I enjoy working with assembly languages and at the circuit level.
I'm a starter, i don't sit down and wait for instructions, i have initiative to start and create solutions.
I have recently completed a course in VLSI Design and Verification. During my training period, I have done two projects: Router Design and Verification and the second one is UART Protocol.
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
I am a materials scientist specializing in micro and nanofabrication, semiconductor devices physics and semiconductor materials characterization. I would like to learn more about chip design.
I'm an person who is interested in electronics and computers my whole life. I like to design chips and pcb's.
As a VLSI enthusiast, I completed a 6-month internship as a NAND product engineer at Micron Technology where my work comprises of post-silicon validation, data analysis using JMP, and testing NAND components under varying PVT conditions in DDR3 and LPDDR4. I'm passionate about CMOS and have experience simulating NAND output drivers through HSPICE simulations in collaboration with the design team. Additionally, I have proficiency in System Verilog, RTL design, and a solid grasp of digital IC, analog IC, and physical design. I hold a master's degree in Microelectronics from BITS Hyderabad and a bachelor's degree in ECE from Gayatri Vidya Parishad. I achieved a GATE ECE score of 571 with an All India Rank (AIR) of 1404 in 2023. devadeepreddi20@gmail.com
