Hi! It's good to see you being here, good to believe we have same interests. Coffee Design Debug Improve OpenSource
Cybersecurity nut, hardware hobbyist, nature enthusiast, amateur trumpet player. I also play World of Warcraft with my dad on the weekends.
CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.
An independent and self-motivated fpga engineer with many product and service based project in semiconductor and cryptography market. More than three years of experience in the crypto mining market. Involved in product design/development, management.
Aspiring analog IC designer
Electronics Engineer student at Benemerita Universidad Autonoma de Puebla
Electronics Engineering Student at Institut Teknologi Sepuluh Nopember
I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.
I am a experienced analog and mixed-signal circuits designer, using standard and/or custom circuits ( external IPs or from my own design ).
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Electrical Engineer M.Sc. Microelectronics
Computer Science Engineer with extensive hardware knowledge.
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
I'm VLSI Design Engineer aspirant and like to work on design challenges in VLSI domain. I like to keep updated of cutting-edge technology in my field of interest.
Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.
I am a Application Engineer working for Cadence Design Systems and I facilitate the use of the Palladium Emulator at different Customers.
FPGA expert, interested by opensource tools for FPGA and for ASIC
Longtime innovator in analog and mixed signal design. US Patents US2773120A and US2560234A.
Electronics Engineer, passionate about science with strong technical and interpersonal skills for working in a team and successfully completing a project.
I am Ashwini ,done Masters in Electronics. Very much interested to learn VLSI Physical Design
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
I am Electronic Engineer from Chile, I like DSP and radioastronomy applications an ordinary guy
I am researcher with goals of developing high end technologies for the future.
I'm a PCB designer, wanting to learn new technologies like FPGA and ASIC. Designing my own chip is my dream.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. He was Mixed Signal IC designer at LSITEC and DFCHIP (Brazil) where worked for 8 years, and Pos-doc of the Universidad de Sao Paulo in collaboration with ALICE-CERN as analog IC designer in the SAMPA ASIC project. He was Adjunct Professor of the Control and Automation course at the Engineering Institute (CUVG) of UFMT for 2 years. He is currently Adjunct Professor of the Department of Electrical Engineering of the Federal University of Minas Gerais (UFMG).
"Lifer" IC designer focused on analog and power management for applications you don't want to know about
I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.
Mad Scientist
A recent graduate student from Syracuse University major in Electrical Engineering with focus in VLSI Designs
I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.
I am enthuastic engineer who has been doing software engineering (Linux kernel), electronics, and now chip designs. My day job is leading teams (senior director) focusing on virtualization and security.
Motivated master' Student with progressive experience in ASIC Design and a real passion for it. An energetic - self-starter and team builder. Navigates high-stress situations and achieves goals on time and under budget. Always believing in learning and solving the problem through Technology.
Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group
I'm a physics major studying at UC Berkeley interested in accelerating research and computational workloads with modern VLSI and FPGA tech.
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
Aspiring IC Design Engineer
A student of Electrical Engineering excited about ASIC design. My interests include Co-Processors and Computer Architecture.
I just finished electrical and electronics engineering. I want to develop myself in the semiconductor field
Researcher and Professor at the National University of Córdoba, Argentina. Actual Research areas: microelectronics, embedded systems, Digital Signal Processing
POEM Technology is a vertically integrated IoT company that develops cellular-connected sensor systems.
Analog/Mixed signal designer.
student
A researcher and VLSI guy
I am VLSI Trainee wanted to design chips
I am student and wanted to improve my knowledge in VLSI
I am a learner with a enthusiasm towards new concepts.
Passionate student of electronics and computer engineering
Electrical Engineering PhD student at Northwestern studying Spintronics and Probabilistic Computing.
Undergraduate student At Indian Institute of Technology Goa Interested in analog electronics, digital electronics, circuit design
Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.
Planning to enter a master's degree program in 2023. Currently employed in consumer product manufacturing. Personal project experience in embedded systems, digital verification, and RTL for FPGAs.
Experienced PCB/Package Layout Engineer with an extensive experience in EDA automation using SKILL python powerscript
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.
PhD student working on a superconducting FPGA design aiming to work on neuromorphic computing in the future.
Working as Professor in an Engineering College, I teach VLSI related subjects like HDL, CMOS design, Verification and Testing
working as Assistant Professor in Sree Vidyanikethan engineering college, Tirupati.
Current iOS Programmer, EE with decade of physical design experience in mixed signal - worked on POWER architecture PLLS.
open source autopilot guy
Undergrad at Harvey Mudd College interested in Computer Science, Computer Engineering, Electrical Engineering and Filmmaking. GitHub: http://github.com/kavidey Youtube: http://youtube.com/@kavidey
I'm a double-degree PhD candidate at University of São Paulo and Communauté Université Grenoble-Alpes with experience in analog/RF design and layouting at integrated technologies and interposers, with experience in slow-wave devices.
Actively Looking to work in a Semiconductor Organisation.I'm undergoing Masters in VLSI. I am Passionate about VLSI and semiconductors.He recently completed the 6-months training in Back-end VLSI at Entuple Technologies. And in addition to that specifically trained in STA, Synthesis and Physical Design by employing Cadence Tools. He is interested in and currently working on Open-Source tools related to VLSI (Openlane)
I would like to think I am a safety-focused, results-driven, and professional Electronics & Communication Engineer and M Tech in Electronics & Communication Engineering with specialization in VLSI Design, who can be relied upon to carry out my tasks competently within strict rules and procedures in a fast and efficient manner.
Professor for microelectronics
i am a tech enthusiastic i love exploring new circuits by designing them want to learn about this
Pham Van Khoa received the B.S. degree in Computer Technology and PhD. degree in Electronic Engineering from the University of Technology and Education, Vietnam and Kookmin University, Korea, respectively. In 2010, he joined ICDREC (Integrated Circuit Design Research and Education Center), where he was engaged in the development of VN8-01 MCU, the first commercial micro-controller fully designed and fabricated by Vietnamese. In 2011, he joined University of Technology and Education HCMC, where he is currently a senior lecturer at Department of Computer and Communication Engineering. His research interests include Low-power VLSI solutions for Memory, Energy Harvesting, Memristor-based Neuromorphic Computing Systems, Neural Network Accelerators and MP-System-on-Chip based designs.
Analog VLSI Design Enthusiast
I'm currently working as an Optics Design Engineer for Biotech applications. My main interests are (Micro/Opto)Electronics, Optics and Photonics, Data Science and Embedded Systems.
Im designated as a lab engineer at Fast NU Isl. My area of expertise is analog and Rf ic design.
I'm a VLSI System Design (VSD) intern, looking for opportunities for tape-out.
Hey! My name is Beyza and I'm an Electrical & Electronical Engineering student in Turkey. My aim is to bring together the knowledge I've gained about science and technology with other people. The more we learn and the more we develop, the better a mark we leave in the world of science. I'm constantly improving myself for a better future, and I am trying to gain as much information as possible.
I have been a Professor in The Dept. of Electronics and Communication, College of Engineering, Guindy (CEG), Anna University, Chennai, India and I have retired last year after being on the faculty of this University for twenty eight years. I continue to teach courses as a Guest Faculty in the same Dept. at CEG, Anna University in the areas of Analog, Mixed Signal, RF and Communication Systems and IC Design. I have supervised student teams in building Small Satellites (Avionics subsystems) and also CMOS IC Designs. I have also supervised Masters and Doctoral thesis in the areas of GPS (baseband), uP Clock PLLs and CDRs, RF LNAs, and resonant sensors.
Earth ICT, SPC Founder & CEO
I am a sophomore BSc student. My major is EEE. I am studying at Bangladesh University of Engineering Technology. I want to use my academic skill to contribute to the fundamental field of particle physics.
RF/Analog IC design and SOC
I am a visual artist . Iam working on digitizing my art and seeking different platforms to accept jobs as a graphic designer.
Assistant Professor. ECE. University of Pittsburgh. Interests: Neuromorphic and Biomedical Systems Design
Fresher interested in asic physical design and looking for job opportunities in physical design engineering
Currently a student in EE, interested in ASIC design and logic synthesis
I'm a Hardworking Engineering Graduate Specialized In Electronics and Communication Engineering With more Skills in VLSI Physical Design.
Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.
I am a senior researcher at Nokia Bell Labs. I am specialized in the design of RFIC and mmWave IC.
Received B.S. degree from Electrical and Electronics Engineering in Middle East Technical University, Turkey, in 2019. Currently, pursuing M.S. degree from Electronics Engineering in Bogazici University, Turkey. Research interests are computer architecture, hardware security and secure memory architecture
I am an entrepreneur by mind. KINCHIT Technologies, aims to develop circular digital technology solutions and services for Industries, governments and global companies that help to solve the root cause problems. Our current economic system is not holistic but devastating and fragile. Resource intensity and population growths of countries are increasingly becoming burden. Therefore there is a need for fundamental and systemic change order, moving away from the current ‘linear’ system to a more pragmatic ‘circular’ model - regenerative and resilient.
Analog IC design engineer with background in sensor Front-End design and semiconductor radiation detectors.
Assistant Professor at the Mechanical and Aerospace Engineering Department. The Henry Samueli School of Engineering. University of California, Irvine.
Analog and rfic design professional working since 1997 , Mainly products on wireless ic design, development and testing. mobile, bluetooth, wlan, uwb, rfid , zigbee chips. blocks receiver, transmitter, pll, ldo, mixer, lna, pa, switch , pmic,
I am the founder of Aurifex Labs LLC. I have a BSEE from Wilkes University. I've spent most of my time in software, education, and entrepreneurship, but have spent the past year learning VLSI and am excited for this new era of open source hardware/tools.
Esmaeil NAJAFIAGHDAM was born in Zonouz, Iran, in 1964. He received the B.E. degree from University of Sistan and Baluchestan, Zahedan, Iran, in 1990, and the M.S. degree from Amir-Kabir University of Technology, Tehran, Iran, in 1994, both in electronic engineering. In 1995, he joined the Department of Electric Engineering at Sahand University of Technology, Tabriz, Iran, as a Lecturer. In 2002, he started his PhD program dealing with a high-performance bandpass Delta Sigma ADC. The research program is directed by Prof. P. Benabes at SUPELEC, France. Esmaeil NAJAFI AGHDAM is now a Professor at Sahand University of Technology. His current research interests include mixed mode electronic circuits, Delta Sigma Converters, RFIC design, Ultrasonic circuits and Electronic measurement.
Senior software engineer in Tron Future Tech. My work is related to CPU/FPGA heterogeneous computing for radar signal processing. Capable of designing RTL IP, implementing Linux kernel driver and system software programming.
I am an graduate student of computer system engineering at Usman Institute of Technology. and working on RISCV based SoC designs since 2019 in Microelectronics Research Lab.
I am a Ph.D. student at the Faculty of Engineering Sciences, University College London. My Ph.D. research focuses on the System-on-Chip design of power electronic converters.
An electronics and communication engineering student with a great passion for RF and analog design.
I am a student at IIIT Bangalore pursuing Integrated Mtech in Electronica and Communications Engineering and am fascinated about silicon wafers and want to pursue a career and build a revolution in this domain.
I am interested in Robotics and Bioengineering. A holistic approach can lead to developing optimal systems. The co-design of cyber-physical systems must take into account the biological and mechanical models, hardware, and software. I search for the application of mathematical representation of models by algebraic geometry, topology, and energy fields. The study of mathematical concepts can lead to hardware and software design that solve complex dynamical systems.
A master's student studying the design of electronic devices
Professional Software Developer and Electronics Hobbyist
I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.
Interested in Analog IC Design
I am a student at Anna University, Chennai, India. I am interested in Neuromorphics.
I am a student who is currently taking a deep dive into the world of ASICs.
I am student.I interested in semiconductor fabrication technics
I am a synthetic biologist and software engineer interested in chip design.
Professor of physics at the University of Texas at Arlington
9th semester Electronic Engineering student with knowledge in Simulink, C++, Orcad, LTspice XVII and Verilog. As an electronic engineer in training I have developed a strong interest about the design of analog circuits as well as the operation and manufacture of logic and graphics processors, in the same way I am interested in the use of solar energy and the efficiency in new technologies.
MS Electrical Engineering Fellow with a focus on Integrated Circuits and Systems Design. Skilled in Cadence (Virtuoso, Innovus and Genus)
As a 9th semester student of Electronic Engineering at Universidad Industrial de Santander, I have developed a strong interests for design of analog circuits, optimization in the construction of transistors and chips manufacturing as well as the aspects that go into it. I posses knowledge of MATLAB (Simulink and Simscape), ORCAD, LTspice XVII, C++ and Verilog.
Graduate student passionate about integrated circuit design for biomedical applications
I am a professor in the department of electrical and computer engineering at University of Cincinnati. My areas of expertise are: CMOS, Beyond-CMOS devices such as RRAM, FeFETs, gated-RRAM, TFTs, novel device design, fabrication, and testing, neuromorphic computing, and hardware security.
Retired IT professional. Using time in my retirement to reconnect to my playful self by undertaking a mix of hardware and software 'sandbox' projects.
I am a Masters fellow student of RFCS2 Lab in IC Designing.
I am a avid analog-RF mixed signal designer. Currently I am experimenting with novel design techniques using open-source tools.
An electrical engineering student studying from FAST-NUCES with a vested interest in IC design.
Automation enthusiast (likes to code in Perl). At this time, Doing Master's in VLSI Design and working as an intern @intel. Great learning experience doing both simultaneously. Have experience designing in both circuit (Low power & timing) & device level (high performance designs for digital applications). Obtained honor of 3rd position in concept design competition by ISRO for designing temperature & radiation resistant Tunnel FET. Would love to work with all device technology enthusiasts as opportunities arise.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
Post-doctoral research fellow in the discipline of Software and Systems, School of Computer Science and Statistics, Trinity College Dublin, with a keen interest in learning new things, specially related to computer science and engineering. Around 4 years experience of teaching and research and more than 10 years of experience in architecture design, optimization, analysis, implementation and verification of digital and digital signal processing systems on FPGAs and ASICs. Diversifying research career by working on quantization of deep convolution neural networks. Author of three peer reviewed journal publications and five international conference publications.
I am Dr. Naushad Alam working as an Associate Professor in the Department of Electronics Engineering, Z H College of Engineering & Technology, Aligarh Muslim University, Aligarh, India. I received B. Tech. degree in Electronics & Communication Engineering from Jamia Millia Islamia, New Delhi in 2003, and M. Tech. Degree in Electronic Circuits & Systems Design from Aligarh Muslim University, Aligarh in 2009. I earned Ph.D. degree in Microelectronics from Indian Institute of Technology Roorkee, India in 2013. My doctoral work was on nanoscale circuit design considering the impact of process-induced mechanical stress. He has published 29 papers in SCI indexed journals that include 10 IEEE Transactions and 33 papers in reputed conferences. I have supervised two PhD thesis in the area of device-circuit co-design and presently supervising two more PhD students. I have also successfully executed a UGC funded research project on TFET based SRAM cell design for IoT Applications. My research interests include device-circuit co-design, robust nanoscale circuit design, low power circuit design, PVT tolerant circuit design, Near-Threshold/Sub-Threshold circuit design etc.
I have done electronic engineering from University of Engineering and Technology Peshawar in 2021, currently, i am doing MS in Electrical Engineering (Specialization in IC Design) from National University of Computer and Emerging Science(FAST-NUCES).
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
I'm a senior in high school interested in computer science.
I have been working as a Full Professor in Electronics Engineering Department, AMU, Aligarh.
MS in IC Design Fellow, RFCS2 lab at FAST-NU Islamabad, Pakistan
An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.
hello, my name is Darshan Guled, i am an engineering student and i am working on PICO RISc processor and RAVEN chip,
U.G. Student at IIT Gandhinagar.
PURSUING M-TECH IN VLSI SPECIALIZATION , FROM IIIT BANGALORE
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
I am a final year Masters student of NIT Rourkela, I am interested in SoC designing using RISCV ISA
I am designed mixed signal ICs for Music, Audio, IoT and sensor applications.
I am a EE with decades of experience in multiple disciples including analog, RF, bio-engineering, embedded systems design, ... a long list. I've had a long career and am fortunate to be able to follow my interest where ever they might be.
Graduate equipped with a Bachelor of Engineering in Electronics and communication with a concentration in Semiconductor and VLSI design with hands-on experience in CAD tools and to join a reputable organization to begin a fulfilling, lifelong career.
Verification engineer and quick learner and really enthusiastic to learn new things
Just a person trying to build a fully featured RISC-V micro-controller and looking cool :)
Professor, Department of Electrical and Computer Engineering Research Interests: Non-volatile Memories, solid state imaging systems, low power microelectronics, microelectronic process technology
Associate Professor in Electrical and Computer Engr. Dept. Teaching and Research in Microelectronics. Teaching interests are in both discrete and integrated electronics, both for undergraduate electronics labs and projects and graduate integrated circuit design, verification, prototype, and test.
An enthusiast of the Open Source World.
Hello everybody! I am a FPGA developer in Croatia, I do FPGA project and am starting ASIC design as another careere choice.
Hi, I'm an Electrical & Computer Engineering + Computer Science student at Oregon State University.
I'm a Senior Researcher at the Barcelona Supercomputing Center and Junior Faculty at Polytechnic University of Catalonia (UPC). I'm the recipient of the RISC-V Educator of the Year Award 2019, for the advanced graduate course Processor Design I'm teaching at UPC, which is focused on the design of high-performance safety-critical systems. I'm the PI of the GPU4S project funded by the European Space Agency (ESA) in which we are investigating the applicability of embedded GPUs in space.
Dynamic and career-oriented VLSI Verification Trainee. Looking for a responsible position as a VLSI verification engineer with a view to utilize and enhance my skills and experience towards professional and personal growth.
Digital Systems and Software Engineer (formerly in management VP and Director of engineering).
Israa Y. I. AbuShawish received the B. Sc degree in electrical and electronics engineering in 2018/2019 (Hons.). She joined the M.Sc. in electrical and electronics engineering from the University of Sharjah in 2019 and in September 2022 she received the degree. She has been working as a teacher assistant with the Department of Electrical and Computer Engineering, University of Sharjah, UAE since 2019. Currently, she worked as a researcher with the research group: Mixed Analog-Digital Smart Electronic Circuits and Systems (MADSECS) in University of Sharjah, which is one of the specialized Research Groups affiliated to the Research Institute for Sciences and Engineering. Her master’s thesis involves the design of low-frequency amplifiers based on highly linear pseudo-resistor and using programmable Analog Building Blocks, such as CMOS rail-to-rail operational amplifiers and Digital programmable operational transconductance amplifiers. She has published several research papers in international conferences and Journals. Her research interests include mixed analog digital IC design, Bio-medical amplifiers and operational amplifier circuit design. Currently she is pursuing a Doctor of Philosophy in Electrical Engineering, at United Arab Emirates University (UAEU).
I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.
Electrical Engineer, pursuing a Masters in Microelectronics
Electrical Engineer interested in the design of mixed signal ASICs
DR. PETER BERMEL is an associate professor of Electrical and Computer Engineering at Purdue University. He is the PI for the SCALE project, which aims to perform workforce development in microelectronics. His research focuses on improving the performance of photovoltaic, thermophotovoltaic, and microelectronic systems using the principles of nanophotonics. Key enabling techniques for his work include electromagnetic and electronic theory, modeling, simulation, fabrication, and characterization.
Full time: Electronics Engineer with an interest in embedded systems solutions. I can take a project goal and design, develop, prototype, program, validate an embedded system reaching that goal. Part-time: Maker, interested in rapid prototyping, my lab has basic machines: CO2 Laser cutter, 3d printers, small milling machine. I've built 3 of my own 3d printers.
Osaze Shears is passionate about many engineering and computational concepts. These include embedded systems, application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and microprocessor technologies. Osaze spends his free time tutoring other students who are interested in learning to become better computer scientists and engineers to benefit the greater society. Osaze is currently a PhD student at Virginia Tech conducting research under the Multifunctional Integrated Circuits and Systems (MICS) lab. His research interests include: • Spiking Neural Networks • Hardware Acceleration • SoC Design with ASICs and FPGAs • Deep Learning • Edge Computing
Enthusiastic VLSI Design Engineer currently working in Domain Specific Architectures
Designer specialized on VLSI radiation tolerant architectures and circuits
M. Pardo (Senior Member, IEEE) received the B.S. degree in electronics engineering from Universidad del Norte, Barranquilla, Colombia, in 2002, and the M.Sc. and Ph.D. degrees in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, USA, in 2007 and 2012, respectively. He is currently an Electronics and Electrical Engineering Department Graduate Programs Coordinator with Universidad del Norte and leads the electronic analog design area. His research interests include the areas of oscillators, energy harvesters, and renewable energy systems.
RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.
I am currently a postgraduate student at the University of Calcutta and graduate with a Bachelor of Science Degree in Electronics, which will broaden my aptitude in numerous aspects. The curriculum is designed for proficiency in problem-solving techniques, organizational skills, and other mechanics that will help me to execute solutions. Which gives me the opportunity to explore in-depth learning experiences in various technology. I am interested in astrophysics, radio astronomy, solar physics, and other space and atmospheric research, also in semiconductor physics and VlSI technology.
Digital Design Engineer
I've done everything from silicon design at the "bottom of the stack" to System Architecture and Design (with plenty of SW to go with it; at every level)
Engineer / VP
I am Full Professor and Head in the Department of ECE, NEHU, Shillong. My research area is Silicon Photonics, Optical Communication, Photonic Integrated Circuits.
As an analog / mixed mode designer for over 30 years. Innovators and always curious over new things.
2nd year student... Learning RISC V Wannabe Physical Design Er
A software developer, technology manager, and hardware tinkerer aspiring to imbue slices of crystals with intelligence.
Electronics Nerd with a passion for neuromorphic chip design
I am a hobby programmer and electrical engineering student. I love to learn and to create new things. Creating a chip is just another step along a long (and hopefully fun) path of learning.
founder of patho.ai, using latest ai tech to accelerate pathology and drug discovery research using custom HDL HPC computation power of performing insilico simulation and compounds search and discovery.
We are an open-source research group dedicated to developing cutting-edge RISC-V architectures for integrated systems. Our focus is on IC design and the development of soft IPs, SoCs, and ASICs for both general-purpose and low-power applications. Our team is committed to advancing the field of VLSI design through innovative research and practical solutions.
I am a current Master's student in IC (Integrated Circuit) and Systems Design, as well as a Research Assistant at the Micro Nanoelectronics (MiNE) Lab located at SEECS NUST. I completed my Bachelor's degree in Electronics Engineering from UET Peshawar. As a member of the MiNE Lab team, I am involved in cutting-edge research in the field of micro and nanoelectronics, with a specific focus on the design and development of integrated circuits and systems. My academic and research background has provided me with a strong foundation in electronics engineering, and I am passionate about utilizing my skills to contribute to the development of innovative technologies in this field.
Currently an eighth semester student of electronic engineering, interested in IC design and continue learning, with experience in verilog, matlab, digital design, TSMC 180 nm design kit. As a student I have also taken the support of subjects in my career as a funament of analog circuits.
I'm an ASIC Design Engineer with a focus on SoC verification. With over three years of experience in the field, I have had the privilege of successfully completing and taping out three projects. My expertise lies in ensuring the functionality and performance of complex System-on-Chip designs through thorough verification methodologies. Throughout my career, I have gained a deep understanding of the entire design flow, from specification and architectural exploration to RTL coding and verification. I am proficient in industry-standard verification languages and methodologies, such as SystemVerilog and UVM.
Principal Scientist at Octave Photonics
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
Designer creating analogue circuits for instrumentation used in medical and physical sciences.
Associate professor of Microelectronics at University of Cagliari, Italy
Passionate about digital electronics and aspiring to launch a career in this dynamic field. Currently seeking an internship opportunity to apply and further develop my knowledge and skills in digital electronics design, verification, circuit analysis, and FPGA programming. Implemented CORDIC Algorithm, UART Tx and Rx module and the Baud rate Generator, Single cycle Risc-v 32 bit processor and LFSR(Linear feedback shift register) , all using Verilog HDL. I am enthusiastic about learning from industry professionals and contributing to innovative projects. With a solid foundation in Verilog HDL, digital logic and a strong drive for continuous growth, Open to opportunities that foster professional development and hands-on experience in digital electronics.
My name is Mohamed, I'm from Egypt, I'm studying at the electronics and communications engineering department at Cairo University, I'm an undergraduate student and my expected graduation year is 2024. I am interested in digital design track, I have done many projects related to this field. I am very passionate to get this experience and I am sure that I will do great work with you.
A human being, professional in microelectronics and telecommunications, passioned about electronics, open source, and music.
I have over thirty years of experience in the semiconductor industry, having worked in fab, EDA and design engineering. have built and led large, geographically distributed teams at a senior manager level. I am passionate about developing talent and skills, particularly in young people from socio-economically underprivileged backgrounds.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
Analog and Mixed signal IC designer
I'm wireless research to make prototype to probe new wireless technology
Leader of a quantum hardware engineering team. Quantum hardware engineer, IBM quantum administrator/ developer, carpenter from the countryside in northern Arizona.
Analog-RF IC circuit and system design engineer.
Hello, my name is Usama Ishfaq. I am an electronics engineer with expertise in IC design. With years of experience in the industry, I have developed a strong understanding of the complexities involved in designing and developing integrated circuits. My passion for electronics and technology has driven me to constantly learn and innovate, ensuring that I stay up-to-date with the latest advancements in the field. I take pride in my ability to work collaboratively with teams and clients to deliver high-quality solutions that meet their specific needs. Thank you for taking the time to read my introduction.
photonics lineal computing developer for microprocessor applied ai for robot high return
I am a results-driven Electrical Engineer with a strong foundation in digital design, RTL to GDSII flow, and system-level architecture, complemented by hands-on experience with FPGA and ASIC environments. With expertise in Verilog, SystemVerilog, and VHDL, I have designed and implemented advanced digital systems, including high-efficiency MLP architectures and custom ASIC designs for optimized performance and power efficiency
Renatus N.K, CEO of Wolinet Tech, leads in AI, cybersecurity, and digital solutions, tech skills and driving innovation across industri
Junior (3rd Year) Electrical Engineering Undergraduate at the University of Notre Dame and Cornell SUPREME Microelectronics Fellow Previous work experience includes an extensive research background in nanomaterial synthesis and novel semiconductor-based memory devices, and coursework in digital integrated circuit design. Includes over 350 hours of cleanroom experience and proficiency with various analytical and scientific instrumentation and software. Published 1 first-author IEEE conference paper. Co-authored a conference paper accepted to IEDM 2024 and one journal paper submitted to ACS Nano. Club experience includes holding an officer position (Secretary) and Electrical Team Lead in the Robotic Football Club (RFC), with a focus on robotics and hardware engineering. Plays the Tuba with the University of Notre Dame Band of the Fighting Irish at various sporting events and other performances. Holds 4X consecutive Dean's List standings and membership in IEEE HKN and TBP, demonstrating consistent academic excellence.
RTL design engineer with experience developing mobile GPUs (Samsung), high-end networking ASICs (Juniper) and CPU cores (MIPS). Co-author of lab manuals and online courses on FPGA design, RTL2GDSII flow and computer architecture. Founder of Verilog Meetup, a Silicon Valley and online community that develops open-source SystemVerilog examples targeting three niches: beginners, students who want to prepare for microarchitectural job interviews and university professors who want to avoid FPGA vendor lock (our examples are interoperable between Xilinx, Altera, Gowin and Lattice and compatible with ASIC flows, such as TinyTapeout and eFabless (in progress)).
I am an Undergrad Student from KNUST, Ghana and I am currently reading electrical and electronics engineering. And I am more interested in how I can incorporate Machine Learning into HDLs.
Graduated as electronic engineer in '93. Think it could be nice and fun to try out this part of the electronic life/world :). I have worked a lot with digital designs over the years, everything from small LED controllers to larger computer boards. And then I am a PCB geek.
Experienced circuit and chip designer and design manager with major interest in low voltage low power analog design.
VLSI DOMAIN SKILLS --------------------------- • Digital Electronics • HDL: Verilog • HVL: System Verilog • TB Methodology: UVM • Protocols: APB, UART, I2C, SPI • EDA Tools: Modelsim, Quartus Prime, Questasim. VLSI RTL SKILLS ---------------------- • Digital Skills : Combinational and Sequential circuits • FSM • Memories • Verilog : Data types • Operators • BA and NBA • Delays in Verilog • Begin-end and fork-join Blocks • System tasks and Function • Compiler directive • FSM Coding. VLSI VERIFICATION SKILLS ------------------------------------ • System Verilog HVL: Data Types • Memories • Interface • OOPS • Constraint Randomization • Threads • Functional coverage • CRCDV • SV Testbench (Hands on SV Testbench) • Universal Verification Methodology: UVM Objects and Components • UVM Factory • UVM Phases • UVM Configuration • TLM • Virtual Sequence and Sequencer • UVM Testbench (Hands on UVM Testbench).
I am a professional in the field of Chip Design, Primary working on Synthesis, Physical Design, Static Timing Analysis and Physical Verification
Dedicated, innovative and enthusiastic individual with consolidated expertise in Digital Electronics, Data Sciences, Robotics and IoT. A confident leader who effectively collaborates with the team members to accomplish all goals in an accurate and timely manner.
Based in India, developing a new SoC type.
A PhD student working in WEST (Wireless Environmental Sensor Technology) Lab with a focus on Analog IC design.
Microwave/RF Electrical Engineer. Love learning new things.
In the electronic age, privacy is our shield — allowing us to reveal ourselves by choice. As the musica universalis guides the universe in harmony, so should our creations. Let's ignite a new Renaissance, driven by humanism and curiosity, a harmonised future of automated world, echoed with the music of human potential. 一期一会
Experienced in software engineering and offensive cybersecurity, I specialize in wireless networking security, cellular communication security, and cryptanalysis. Proficient in C, C++, and Python, I excel in scripting and automation. Currently delving into embedded system design, focusing on FPGA and ASIC.
I am a Computer Engineer at the University of Notre Dame, with minors in Innovation and Entrepreneurship and Corporate Engineering Practices. I enjoy working with assembly languages and at the circuit level.
I am electronics engineer with 30years experience. I have very good expertise in IC packaging.
Apacionado por el procesamiento de la informacion, ciberseguridad, Creacion de aplicaciones para administracion y control de gestiones.
I am a blockchain developer and data scientist student looking to make my own intelligent farming drones as my long term goal for the future. I want to learn chip design so that my company is able to manufacture the drones from scratch thereby providing a custom service to our clients.
He/Him High School Student Just a regular student who is doing things impulsively (more like out of boredom).
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
I am working as an asssociate professor in EC departments, at Dharmsinh Desai University, Nadiad, Gujarat. I am working in the field of Analog and Mixed signal Design. I had proposed small size CSDAC in my phd work and now I am working on 16 bit bidirectional data bus to communicate two ICs at different voltages. I want to prepare IC for it.
I am a materials scientist specializing in micro and nanofabrication, semiconductor devices physics and semiconductor materials characterization. I would like to learn more about chip design.
My research interests include systematic circuit synthesis techniques, modeling and simulation of linear and nonlinear circuits and systems, design and applications of fractional order chaotic oscillators, multi-objective optimization, evolutionary algorithms, and analog and mixed-signal design automation tools.
I am an Engineer and Project Manager in Software and Hardware Space !
holding a Doctorate in Electronics and Telecommunication Engineering, with a robust background in research and innovation. Throughout my academic and professional journey, I have successfully completed four significant research proposals, contributing to over 60 publications in esteemed journals and conferences within the field. My dedication to advancing technology and fostering innovation led to the granting of a patent, underscoring my commitment to pushing the boundaries of knowledge. Additionally, I have secured copyrights for 10 original works, further cementing my contributions to intellectual property. In addition to my research endeavors, I have also ventured into the realm of academia, having published seven books and serving as the editor of Scrivener Wiley, a prestigious platform in the academic community. These publications not only showcase my expertise but also reflect my passion for sharing knowledge and nurturing the next generation of professionals in the field. With a multidisciplinary approach and a drive for excellence, I am poised to continue making significant strides in electronics and telecommunication engineering, leveraging my expertise to address pressing challenges and drive impactful innovation.
I am really interested in Research for progressing my work in RF electronics
I love to learn and make things. RF, power electronics and AI/ML get me really wondering, what could we do with all of them.
Hao-Yen Tang received his PhD degree from UC Berkeley Advised by Prof. Bernhard E. Boser, his PhD research, PMUT ultrasonic fingerprint sensor, convince InvenSense senior management to make a heavy investment to take this technology to mass market. At InvenSense he’s leading a multi-disciplinary system team for the next generation ultrasonic fingerprint sensor bringup, characterization and calibration, coordinating the works from different field including acoustic, MEMS, CMOS, FW, and SW. Currently, he serves as CTO/Co-Founder in the startup company UltraSense Systems. The company is aiming to transform any surface material into a Touch/Press user interface with it’s proprietary PiezoMEMS-CMOS technology. Dr. Tang is the recipient of 2016 ISSCC Best Paper Award (Lewis Winner Award for Outstanding Paper), 2015 SSCS Pre-Doctoral Award and 2015 ADI Outstanding Student Designer Award. Currently he holds 20+ granted patents, 20+ publications, and 2000+ citations.
I'm a BTech Electronics and Instrumentation graduate and an electronics enthusiast who was inspired by the open-source silicon technology and it's accomplishment and aim to build a career for myself in VLSI specifically as an ASIC Physical Design Engineer.
I'm an person who is interested in electronics and computers my whole life. I like to design chips and pcb's.
Learning to build brain-inspired Neuromorphic chips. I used to wrestle with GPUs for graphics and AI. Previously at Unity Technologies and Electronic Arts.
I am a computer engineer with 8 years experience in developing and deploying innovative solutions in the following areas: Analog, digital, embedded systems, network infrastructure and Internet of things (IoT) hardware (PCB and firmware programming), Phonotaxic pest control systems, bioelectronics for detection of volatile organic compounds of infectious diseases, Monitoring, evaluation and process control, Artificial intelligence, machine learning, deep learning and computer vision. Robotics and drones If you want to build, design, repair, maintain or integrate any kind of hardware, feel free to DM. I also do product management and development of all kinds of softwares including those you think can’t be done in Nigeria. If you need help for any project you’re working on, including academic projects just contact me and I would to assist to the capacity which my spare time can allow, you don’t have to pay if you are a member here.
Electrical Engineering Student at the University of North Texas. Aspiring Digital IC Designer.
Myself is a self-taught Electronics Engineer interested in many engineering topics , eager to know how everything works. I prefer to make things myself with gained knowledge and wants to improve myself and learn new stuffs.
Design Verification Engineer with a keen sense of interest in Computer Architecture and RTL Design
Open Hardware Scientist
I am Taufiq Alif Kurniawan, Assistant Prof. in Department of Electrical Engineering, Universitas Indonesia. My research field is RF/analog IC Design. For full information, please access : http://staff.ui.ac.id/taufiq.alif
Since 2001 I have worked for a small IC Layout design firm located in Wilsonville, Oregon called Coast-to-Coast Layout Design Inc. We provide full-custom mask design services to big semiconductor partners, both digital and analog/mixed-signal. I began my career as a part-time Linux systems administrator, and was taught mask design by my mentor and boss, then over the past couple decades I moved up the ranks to my current GM position where I am responsible for most day-to-day operations and management of multiple mask design teams who are very highly valued by our customers that rely on our services to meet tough tapeout schedule and quality requirements. I'm here because I'm planning to use open-source EDA tools to help train new mask designers to help grow my company.
Greetings! I, Devang Sharma am a B.Tech final year student studying at Jaypee Institute, Noida. I am a VLSI-enthusiast and posses moderate to advanced-level skillset(at B.Tech level). I have studied about ASIC Design Flow and learnt several HDLs(Verilog, SV, UVM).
i am student and electronics is my hobbby
Interested in new concepts for RF circuit, wideband digitization, low-power IoT, and medical devices.
I am a Professor at BITS Pilani. I teach courses on VLSI Design, Semiconductor device and process and Analog Design. My area of research includes neuromorphic computing, embedded memories and biosensors.