Senior Vice president at Signoff Semi
Co-Founder and Director of Silizium Circuits Private Limited.
I`m electrical engineer.
Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
I m the Account manager, at Adroitec Systems Pvt Ltd, we are providing physical design services
CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.
semi retired, small startup for Medical (oncology/treatment) system, analog circuit designer, College Lecturer, Surfer&moto Rider.
Analog systems and circuit design engineer with extensive product development and applications experience with a strong focus on end markets. Proven ability to work closely with a diverse set of customers and clients to properly specify the requirements of a mixed-signal ASIC. Ability to manage product development from foundry selection through design, tape-out, and mass-production.
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
I am a professional hardware engineer. I have experience in the development and design of radio equipment and IoT devices. I only have textbook-level knowledge about the contents of semiconductors, so I wanted to have the experience of actually developing them. This project is very interesting. thank you.
I'm an AMS Design engineer. I like the IC design world and my recent goal is to be a scientist :)
I have been working on Analog/Mixed-Signal Integrated Circuits design since last 16 years. I graduated from NED UET, Karachi in 2001 and then worked with Avaz Networks, a Silicon-Valley Company on RTL design and verification of a high-density Line Echo Cancellation Engine for a couple of years. Joined Linkoping University, Sweden in 2003 for Masters in SOC, which concluded with a Masters Thesis on Sigma-Delta Modulators with Fraunhofer Institute of Integrated Circuits, Germany in 2005. The same year I joined University of Trento and Fondazione Bruno Kessler, Trento, Italy for my PhD on Readout Interface Design for MEMS Capacitive Microphones. Worked with ST-Microelectronics, Milano and Analog-Devices, Copenhagen as a Guest PhD Student. This Phd results in 20+ publications and 2 patents with 3 successful MEMS Readout ASICs.
I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.
I have more than five years’ experience in electronics integrated circuits industry. I have been involved in more than six silicon runs which were all successful and meeting expectations.
Author of Yosys, IceStorm, PicoRV32, and other Open Source things
I am a experienced analog and mixed-signal circuits designer, using standard and/or custom circuits ( external IPs or from my own design ).
Developer of open source EDA tools on Open Circuit Design
I'm a staff member at efabless responsible for product management, business development, strategy, partnerships.
Analog IC design engineer with expertise in designing analog building blocks variable gain amplifiers, active filters, frequency synthesizer (integer-N PLLs), voltage regulators.
VLSI circuit design engineer with significant experience in microprocessor design in semiconductor processes from 65nm to 10nm. Provided register file designs and design training for Intel Big Core and SOC projects. Helped create semi-automated array layout methodology. Established cross-organizational methodology for variation analysis in register files. Converged memory IP handling across multiple organizations.
Valparaiso University - College of Engineering - ECE professor
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
Engineer, who typically worked in start up environment. So do A-Z, a-z and 1 - infinity if something has to work
AMS Design Engineer Love Electronics and programing
I am a full custom analog and mixed-signal IC design consultant. I have been consulting for over 22 years following 12 years as a staff member at MIT Lincoln Laboratory.
We are building a community of OSHW Product Creators. Our focused mission is to simplify the process of smart product creation and making it available to everyone. We believe in Open Source Hardware as the foundation for addressing the massive and divergent forms and features of the new connected world.
Analog Designer
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Manager of Universal Avionics System Corporation(UASC) PLD design group. This group is tasked with designing, implementing and approving, in accordance with RTCA/DO-254 guidance, all ASIC/FPGA used in the Universal Avionics product line.
Electrical Engineer M.Sc. Microelectronics
Working as a instruments engineer, and currently working on my masters of Microelectronic Systems Design. Passionate about designing analog/mixed signal IC's and systems
Freelancer
Embedded System Engineer
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
Analog full custom design experience of Low power VOltage regulators, Bandgap reference, calibration circuits and common mode receiver. worked on SERDES IP (up to 12Gbps) compliant with USB 3.1 and SATA protocols. AS ESD ENgineer for SERDES IP Improved existing ESD network simulation strategy and ESD network for robust ESD performance reliability and automated existing current density flow for ESD for better efficiency. Technology Nodes: 14nm(FINFet), 28nm(FDSOI) 28 nm,40nm,90nm,180nm (Bulk)
I just was learning to design the IPs.
Analog Designer
Recent college graduate from San Jose State University with Masters in Electrical Engineering degree. Specialization - Digital Design and Verification.
Power IC designer for 27 years primarily in Silicon Valley.
I am a RD designer focus on power management ic design. I have about ten years working experience. Hope I can do something for this great platform ~ !
Experienced Analog/RF integrated circuit design
I am an Electrical Engineer at Marcus Engineering working primarily on embedded systems in a wide range of applications in the Medical, Military and Aerospace sectors.
We’re supporting a community where more than millions of people learn, share, and work together to build a chip. At VSD, where we always promote “open source,” we’re promoting about a proven method of collaborating to create technology. The freedom to see the design, to learn from it, to ask questions and offer improvements: This is the open source way.
Physical Design Engineer, 5 Years of experience and always fascinate about learning new concepts. Open to understand & take participate in Open Source.
Exploring yourself in Physical design it's just like exploring yourself in creating a Brain .
I am a digital design/verification engineer. I have 2 years of full-time industry experience. In total, I have 4.5 years of experience in RTL design, Electronic Design Automation and Verification using VHDL/Verilog, Perl, Tcl and Linux. I was the #1 graduate of Bahcesehir University in Mechatronics Engineering in 2013
Analog/Mixed-Signal IC Design Engineer
BSEE graduating senior with a focus in digital design. I have taken coursework in Analog, Digital, Mixed Signal and RF IC design, and have experience using Cadence's tool suite as well as NI's AWR. I have also done multiple EDA centric courses in validation, formal and functional verification and Digital IC Testing
I work as an AE in Cadence. I am willing to learn new things and try and incorporate the same at my workplace
I am a Application Engineer working for Cadence Design Systems and I facilitate the use of the Palladium Emulator at different Customers.
senior student-ECE departmant-faculty of engineering-ASU.
i'm expert analog mixed signal IC design engineer 7 years experience
Current working in my PhD at BarcelonaTech.
Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.
FPGA expert, interested by opensource tools for FPGA and for ASIC
Longtime innovator in analog and mixed signal design. US Patents US2773120A and US2560234A.
HW development engineer
Electronics Engineer, passionate about science with strong technical and interpersonal skills for working in a team and successfully completing a project.
Graduated 4 tears back in engineering specialized in electronics and telecommuniation engineering with a first class. Now I am working at a startup as the team lead of the embedded design team. I am also a postgraduate student in Msc in wireless communication engineering course. Creon Solutions is my freelancer name. I do image processing, PCB and circuit designs ...etc in Freelancer.com
I've been worked as an Electrical Engineer for more than 20 years. I'd like to bring Artificial Intelligence to the EE design so that it can be "Self-driving".
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
Master's student at UFCG. Work with Cadence tools. I work with AMS and digital circuits (using Verilog language) and analog layout as well.
Enthusiastic analog designer
Worked at Cadence Design Systems for three years. Was responsible for design of PLLs for SerDes IPs
>10 years of experience in precision analog and sensor interface IC design.
Fresh grad electronics engineer and a beginner circuits designer who admires analog/RF IC design. Former intern at ADI© (Egypt) and recently a junior Analog IC designer at Si-Ware Systems (Egypt). My GP was a 5G Transceiver in the band 26.5GHz - 29.5GHz, I designed the upconversion mixer (core circuit, power combiner, LO driver).
I am an Analog design engineer graduated from Ain-shams university in 2018. My graduation project was to design a Decision Feedback Equalizer in a 10 Gb/s serial link transceiver, starting from building the circuit from scratch to layout and post layout simulations and system integration.
I am an Analog IC Designer by profession. I have loved and done circuit design from my high school days in India. I love developing new challenging circuits and seeing them work in real applications.
Graduate student of ECE department Ain Shams University, and Currently Master Student of ECE department Cairo University with major of Electronics design.
Associate professor at Pontificia Universidad Catolica de Chile, analog and mixed-signal design
I am a senior researcher in INESC-ID, Lisbon.
Analog Mixed Signal IC Designer
I am an electronic hobbyist who enjoys building different electronic circuits and systems.
Research Assistant and MSc student at Hamburg University of Technology (TUHH) - Microelectronics and Microsystems. Graduated from Faculty of Engineering, Ain Shams University - Electronics and Electrical Communication Section. ASIC projects I have done include: - FinFET Synchronous/Asynchronous Standard Cell Library. DOI: 10.1109/ICM.2016.7847881 - FinFET SRAM based PUF. DOI: 10.1109/ICCES.2017.8275272 - AC-DC Power Converters for Wireless Power Harvesting Unit in 350 nm CMOS Technology for Medical Implantable Devices
I am an IC designer graduated from faculty of engineering at Ain-shams university in EGYPT in 2018, Now I am a reserch assistant at the IC laboratory of Ain-shams university. My graduation project was to design a decision feedback equalizer (DFE) of a high speed serial link transceiver form scratch to post layout simulations and system integration.
Hardware design engineer
35 years mixed signal SoC, ASIC, and FPGA design and management experience. Concertal provides rapid functional IP integration using proprietary System Design Automation technology that includes delivery of RTOS capable fabric that supports loosely coupled HW operation including IP NbC (Network beyond the Chip). IP areas of expertise include common interfaces, data converters, modulators, digital filters, DSP, processors, FSM, and other custom specified functionality.
working as a analog design engineer in Cadence Benguluru(India)
I am researcher with goals of developing high end technologies for the future.
José T. de Sousa holds a PhD degree from Imperial College London (1998) and has been a university lecturer and researcher at Lisbon University (1999-present). He holds 4 international patents, is co-author of one book, and was General Chair of the Field Programmable Logic and Applications Conference in 2013. Dr. de Sousa has published more than 70 technical papers in international journals and conferences. He was co-founder and CEO of Coreworks, a semiconductor intellectual property company, which he ran from 2001 to 2013. His specialties are digital circuit design, hardware/software architecture, technical team management and semiconductor IP marketing and sales.
Principle Engineer at efabless corporation
Physical Design Engineer
Associate Professor (Electrical and Electronic Engineering) Implantable chip design Low power sensors
Analog circuit designer with passion in taking challenges .Interest in ADC,DAC,PLL,SDADC,LDO.Done layout of all these blocks.
designing mixed-mode ASICs since 1986 :-)
Hi , I am Dhiraj Poojary , Analog Design Engineer by profession and looking to learn something here !!
Experienced Analog Design Engineer with strong background in HV CMOS ASICs.
Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.
An experimental physicist through sensor and instrumentation development.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. He was Mixed Signal IC designer at LSITEC and DFCHIP (Brazil) where worked for 8 years, and Pos-doc of the Universidad de Sao Paulo in collaboration with ALICE-CERN as analog IC designer in the SAMPA ASIC project. He was Adjunct Professor of the Control and Automation course at the Engineering Institute (CUVG) of UFMT for 2 years. He is currently Adjunct Professor of the Department of Electrical Engineering of the Federal University of Minas Gerais (UFMG).
"Lifer" IC designer focused on analog and power management for applications you don't want to know about
I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.
Vice President of Engineering - Seamless Microsystems. We design high performance AFEs using proprietary and patented technology that encodes the signal in the time-domain instead of voltage or current. This enables us to design low-power ADCs and amplifiers in scaled CMOS. Contact us if you'd like to hear more and engage our services.
Professor in Electronics Engineering with a PhD. in VLSI (Universidad Nacional de Mar del Plata). Expertise in digital RTL and physical design. Experience in FPGA RTL and HLS design for heterogeneous computing. Knowledge in sub-threshold analog design. Fiction writer (National Literature Award for Novel, 2011, Costa Rica)
Expert in embedded and mobile applications since 2003. Has many years of experience in software and hardware development, effective team management. Excellent in the research and development, technology findings and implementations.
Mad Scientist
Managing Partner
Professor Emeritus from Georgia Institute of Technology. Developer and lecturer on analog integrated circuit design.
Interested in Design, Verification, and Hand-off of Analog IPs. Worked on the definition, modeling, design, verification of DC-DC converters, Chargers, Ideal-Diodes, LDOs, Regulators, Bandgap references, Current limiting and sensing architectures. Excited for challenges in Analog Design, Layout and Post-silicon verification.
Passionate about engineering and electronics. Love teaching and mentoring. Highly experience in analogue and RF electronics and enjoy managing projects.
Physical Design Engineer
I am enthusiastic at analog IC design and IC industry. Now I am design power block and analog block in Touch IC.
Senior Mechanical Design Engineer with 23 years experience in the design and installation of mechanical systems. Primarily focus is on Commercial High Rise and Institutional HVAC and Domestic Water Systems and associated Controls.
I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.
An experienced mixed-signal IC design engineer / design manager with over 25 years experience. Has design and led the design of multiple mixed-signal ICs through to tapeout and silicon verification. Also experienced with the delivery of IP blocks. Worked across multiple market sectors.
I am an experienced semiconductor expert with twenty years of experience both in top semiconductor companies such as Sony, National Semiconductor, Analog Devices, and Cambridge Silicon Radio and much smaller companies such as Pericom and Theta Microelectronics. I designed high-volume products for customers including Quantum, Western Digital, Hewlett-Packard and Nokia. I also acted as an expert evaluator for European Union H2020 framework project calls and EURIPIDES research frameworks. Specialities: CMOS/BiCMOS, SOI CMOS analogue and radio-frequency integrated circuit design: Millimetre-wave phase shifters, vector modulators, attenuators, Phased-array transceivers, LNA (Bluetooth, FM, 802.11n) Mixer (100MHz to 4GHz) Limiting Amplifiers for optical communication circuits, Transimpedance Amplifiers, Low-power RF Amplifiers Hard-disk preamplifiers, Clock and Data Recovery (CDR) circuits, High-speed output drivers (CML), Sigma-delta converters. Xtal Oscillators, Ultra-low power CMOS circuits for RFID transponders CMOS RF-DC Energy Harvesting circuits
Experienced leader of industry and academia focusing on developing customized hardware accelerators for low power mobile, AI and IoT devices. Over 20-years hands-on experience in all aspects of SOC and processor design. Specialties: memory design (SRAM, regfile, CAM), VLSI design for best Power, Performance, and Area (PPA) design point. Power management and power conversion including dc/dc and ac/dc. Computer Architecture and Hardware accelerator using In-Memory-Computing and Emerging Technologies (RRAM)
Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.
MSC in Electrical Engineering BSC in Electronics Two patents in mathematical software in Engineering design and digital signal processing utility box Undergo private research for commercial use in the areas of very high frequency analog and digital circuits
30+ years of experience ranging across telecom, embedded systems, semiconductor, firmware development.
Analog/RF Engineer with 20+ years of custom IC design at the transistor level. See www.vhf.design for more background on semiconductor experience.
ASIC architect and designer. Specialize in deep learning, video, image and signal processing, and compression. Professor of Electrical and Computer Engineering at The College of New Jersey.
Masters in "Integrated Circuits & Systems" focused on Analog / Mixed Signal System/ IC design
Research Scholar | Analog Circuits | EMI Immune Amplifiers | Neuromorphic Circuits
ULP AMS design for sensor interface
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
Aspiring IC Design Engineer
Assistant Professor (IISc) | Ph.D. & S.M. (MIT) | B.Tech. (IIT-KGP)
PhD Student Research on Integrated Sensor Interfacing Systems featuring signal conditioning and A/D conversion. Functional blocks developed: VGA, current-steering DAC, SAR ADC, AA Filters, SPI master/slave.
I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/
Still an entry-level electronic engineer. Absorbing and practising information and knowledge. Just for curiosity and fun.
Engineering Consultant with 20 years of experience in RF and Analog Circuit Design
R&D product developer
I am working as Co-founder & CTO of Upplysning Robotics, which is focused on the development of biomedical devices like digital stethoscopes with built-in ECG and PCG, auto-detect heart irregular arrhythmias, and its flagship project is the design of artificial hearts and implants inside the human body and also Cardiac Robotics medicals devices
VLSI Design or VLSI Chip Design is a process of integrating hundreds of thousands of transistors onto a singular silicon semiconductor microchip. Get VLSI Design training From Industry Experts of Maven Silicon. https://www.maven-silicon.com/vlsi-design
More than 14 years of experience in Electronic Design Automation roles with leading industry companies like Intel, Samsung and others. Have a strong background in EDA best practices and technologies like DRC, LVS, XRC, PERC and others. Have a mixed background in circuit. design, data science and programming with emphasis on data analysis for microchip design. Have strong background leading project deliveries to fortune 100 companies in the world. B.Sc. in Electrical Engineering from faculty of Engineering, Ain Shams University, Cairo, Egypt.
Principal engineer leading PNT product development at GE Aerospace
Analog/Mixed signal designer.
I am a Newbie circuit design engineer and have keen interest in designing circuits and being part of state of the art design projects
MS ECE (Nanoscale devices and systems) at UCSD
I am an Associate Professor teaching VLSI design, hardware security, and digital circuit design at Drexel University. My research interests include analysis, modeling, and design methodologies for high performance digital and mixed-signal integrated circuits, power management for SoC and microprocessor circuits, hardware security, including digital and analog obfuscation and Trojan detection, and electric and thermal modeling and characterization, signal and power integrity, and power and clock delivery for heterogeneous 2-D and 3-D circuits.
Kashif Inayat currently working as a doctorate fellow researcher at System-on-Chips (SoC) Laboratory, Electronics Engineering Department of Incheon National University, South Korea. He considers himself fortunate to have the opportunity to work under Prof. Jaeyong Chung at Incheon National University. Prior to starting his Ph.D., he completed his Master of Science in Electronics and Computer Engineering (ECE) from graduate school, Hongik University in 2019 under the supervision of Prof. Seong Oun Hwang. Moreover, during MS studies he worked at Information Security and Machine Learning Lab, Hongik University, South Korea as a graduate researcher for 2.5 years. Furthermore, he chaired the special sessions at International Conference on Green and Human Information Technology (ICGHIT 2019), held in Kuala Lumpur, Malaysia (Jan, 16-18, 2019). Moreover, he is a registered member of the Pakistan Engineering Council and a reviewer for the IEEE Access Journal.
Ph.D. scholar in electrical engineering department at IIT Indore
Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.
Analog Circuit Design Engineer with 22+ years of experience. Areas of expertise are OpAmp, BandGap, POR & ADCs.
Founder | Product Leader | Analog IC Designer
An aspiring Analog/RF IC designer aiming to make a difference through existing knowledge and innovative ideas.
Analog mixed signal IC design professional with 22 years of experience
I am a fourth year Electrical engineering student interested in design and verification of digital and analog integrated circuits. - I have experience doing layout for RFIC using SOI processes where I gained extensive knowledge in device physics, floorplanning, ESD protection techniques, and techniques to mitigate manufacturing limitations -I have extensive experience using Cadence Virtuoso layout XL , running verification simulations using Cadence ADE Explorer, EMX, and PEX.
Currently working as a Graduate Instructor in the department of Electrical and Computer Engineering and pursuing my Ph.D. in Electrical Engineering at the University of Missouri-Columbia. My research focuses on the development and design of low power decision-making Integrated Circuit (IC) using different type of Ai/Machine-Learning techniques. Besides researching on developing future technology, I'm also a professionally trained Vocalist in traditional South-Asian music majoring in Tagore and have experience in freelancing of 5 years in Digital Art and Graphics.
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
csconcretereadymix
Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.
I am an Electrical Engineering working VLSI design farm with 7 tape-out experiences.
I am a VLSI enthusiast looking for an opportunity to make my career as a Design engineer in the Hardware Industry.
Ph.D Student studying analog/mixed-signal VLSI at Brigham Young University
Current iOS Programmer, EE with decade of physical design experience in mixed signal - worked on POWER architecture PLLS.
I'm a double-degree PhD candidate at University of São Paulo and Communauté Université Grenoble-Alpes with experience in analog/RF design and layouting at integrated technologies and interposers, with experience in slow-wave devices.
Professor for microelectronics
I am professor at Dept of EEE, BUET, Passionate to teach students IC Design and Fabrication Skill.
My area of interest is Analog and Mixed signal circuit design. I teach Electronic Circuit, VLSI design and Signals & Systems for under graduate students and Analog Integrated Circuit Design, Data Converters and Clock & power management circuit courses for Masters students. I also teach VLSI lab courses for both both undergraduate and masters students. Every year I supervise both undergraduate and masters students in analog circuit design projects. Presently I am involved in SRC project as Co-task leader in Analog and Mixed Signal circuit verification project using Machine learning techniques.
I work with embedded systems, analog electronics and general physics research. I founded a small engineering services company in Brazil, currently working with a team of 3 engineers to create products and help companies on their way to to production.
Analog VLSI Design Enthusiast
High Performance, High Frequency Analog, Microwave, RF and Optical Chip and Package Test Software and Hardware, Multi-Chip System Integration and Reliability
Juan Camilo Castellanos received in 2009 his B.S. degree in electronic engineering from National University of Colombia in Bogota, Colombia. In 2011, he received the M.S. degree in electrical engineering from State University of Campinas, Brazil. Later, he enrolled in the Brazilian IC design programme, called CI-Brasil. In 2013, he was analogue and mixed signal designer in the non-volatile memory group at Freescale Semiconductors (Now NXP) in Brazil. He received the Ph.D. degree from Eindhoven University of Technology, The Netherlands in 2018. He was lecturer in the Informatics Department at State University of Ponta Grossa in Brazil. In 2019, he was professor at the department of mobility engineering at Federal University of Santa Catarina (UFSC), Brazil. Since 2020, he joined as professor at the Department of Electrotechnics at Federal University of Technology - Paraná/Brazil (UTFPR). His research interest includes embedded systems (IoT, smart sensors, sensor fusion, DSPs, microcontrollers, FPGAs) and analogue and mixed-signal integrated circuits for power management (DC-DC converters, charge pumps, LED drivers and current/voltage monitors, energy harvesting).
I'm currently working as an Optics Design Engineer for Biotech applications. My main interests are (Micro/Opto)Electronics, Optics and Photonics, Data Science and Embedded Systems.
Electronic Engineer from the Federal University of Santa Catarina (Brazil). Master in Electrical Engineering from UFSC (thesis title: CMOS Ultra-Low-Voltage Ring Oscillators). Interested in the areas of Sensors, Ultra-Low Power Circuits and MOS modeling.
I have done my undergraduate in Electronic Engineering. Right now I am doing MS in Electrical Engineering(Specialized in IC Design) from NUCES FAST, Islamabad.
hi, i am jawad. I have done my bachelors in electrical engineering from UET Lahore, Currently, as a research student, i am interested in SoC's. My future goals is to develop expertise in analog, mixed signal and RF circuits designs.
I have done undergraduate in Electronics Engineering and doing MS in IC design from NUCES-Fast Islamabad.
I have been a Professor in The Dept. of Electronics and Communication, College of Engineering, Guindy (CEG), Anna University, Chennai, India and I have retired last year after being on the faculty of this University for twenty eight years. I continue to teach courses as a Guest Faculty in the same Dept. at CEG, Anna University in the areas of Analog, Mixed Signal, RF and Communication Systems and IC Design. I have supervised student teams in building Small Satellites (Avionics subsystems) and also CMOS IC Designs. I have also supervised Masters and Doctoral thesis in the areas of GPS (baseband), uP Clock PLLs and CDRs, RF LNAs, and resonant sensors.
I am a Graduate student pursuing my master's in Computer Engineering. I am interested in VLSI projects.
RF/Analog IC design and SOC
Electrical Engineering PhD student at BYU
I am a teacher/researcher with the Federal University of Santa Catarina-Brazil. My research main topics are: Analog/Mixed signal Integrated circuits for biomedical applications.
I am a microelectronic engineer/CMOS designer with an emphasis on digital & low-power electronics and front-end circuitry. I am an academic at The University of Sydney, Australia and working on devices to data solutions for a range of problems such as unmet needs in electronic monitoring/sensing and interventions in neurological disorders.
Assistant Professor. ECE. University of Pittsburgh. Interests: Neuromorphic and Biomedical Systems Design
PhD in microelectronics, Professional Skills -Electronics circuit design; both IC and discrete circuit design. -Experienced in circuit design and layout in different CMOS technologies with tape-out experiences from 0.xn--18m-yyc to 40nm.
Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.
I am a senior researcher at Nokia Bell Labs. I am specialized in the design of RFIC and mmWave IC.
Founder and CEO of Earth ICT, SPC NAICS 334413; Semiconductor and Related Device Manufacturing Incorporation Date: 08/03/2021 Corporation ID: C4773876 1-650-996-7232 art@earthictspc.com Biography: Dauntless Entrepreneurial Risk-taker; Invited expert, ITU-T ICT Sector L.TIME (The IC Metric for Energy-efficiency, Quality-Factor) Recommendation. “Art is many faceted; he creates outside the box; he is a serial entrepreneur-intrapreneur and change agent, and is flexible-adaptable-situational. He has worked for Silicon Valley icons such as SRI, Applicon, Computer Sciences Corporation, Informatics, Atari R&D, Interactive Research Corp., Samsung Information Systems America. And he has participated in several startups: Digital Video Inc. (1985–2001), Ravisent Technologies (1998–1999)” [source: ”Sustainable computing - ACM ]
Analog and rfic design professional working since 1997 , Mainly products on wireless ic design, development and testing. mobile, bluetooth, wlan, uwb, rfid , zigbee chips. blocks receiver, transmitter, pll, ldo, mixer, lna, pa, switch , pmic,
Esmaeil NAJAFIAGHDAM was born in Zonouz, Iran, in 1964. He received the B.E. degree from University of Sistan and Baluchestan, Zahedan, Iran, in 1990, and the M.S. degree from Amir-Kabir University of Technology, Tehran, Iran, in 1994, both in electronic engineering. In 1995, he joined the Department of Electric Engineering at Sahand University of Technology, Tabriz, Iran, as a Lecturer. In 2002, he started his PhD program dealing with a high-performance bandpass Delta Sigma ADC. The research program is directed by Prof. P. Benabes at SUPELEC, France. Esmaeil NAJAFI AGHDAM is now a Professor at Sahand University of Technology. His current research interests include mixed mode electronic circuits, Delta Sigma Converters, RFIC design, Ultrasonic circuits and Electronic measurement.
I am a Ph.D. student at the Faculty of Engineering Sciences, University College London. My Ph.D. research focuses on the System-on-Chip design of power electronic converters.
An electronics and communication engineering student with a great passion for RF and analog design.
Analog Mixed Signal Design Engineer
Analog & RF designs in interesting, escpically in clock circuits.
I am interested in new things. I've designed chips from definition to polygons, mostly in the pursuit of new capabilities.
Analog design engineer with 3+ years of experience in the analog/ mixed signal design, verification and lab validation.
Alejandro Bautista received the M.Sc. and Ph.D. with a specialty in Electronics from INAOE, in 2014 and 2018 respectively. In 2016 he was a visiting scholar in the Electrical Engineering Department of the University of Texas A & M under the supervision of Dr. Jose Silva-Martinez. His research interest includes RF/mixed-mode circuits & systems, wireless communications, low-power.
I am an electrical engineer
I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.
I am hager mohamad diff allh, from faculty of engineering-MINIA university (Electrical engineering department).
Semi retired adjunct professor 45 years of IC design experience in mixed signal with over 100 patents. Presently entrepreneur working on PhD at ASU Have facilities and equipment to design and characterize chips at home lab and at 2 universities.
I am an Electronics Engineer now continuing my MS in electronics from COMSATS Abbottabad in Analogue Chip Design.
Evolve Technologies & Services Private Limited is involved in the area of manufacturing a broad plethora of Baggage Scanner, Scanner Machine, and Dental Equipment. In their development process, we assure that only top notch basic material is used by our professionals along with ultra-modern tools and machinery .Working under the mentorship of Anil Dahale, we have acquired a reputed stature in the industry.
IC design Engineer
Assistant Professor in the Department of Electrical and Computer Engineering at The University of Mississippi
Professor for electronic circuits at Karlsruhe University of Applied Sciences in Germany since 2020. I received the Dipl.-Ing.(FH) degree from the Karlsruhe University of Applied Sciences, Germany in 2005, and the Ph.D. degree in mechatronics from Johannes Kepler University Linz, Austria, in 2014. From 2005 to 2009, I worked as an IC designer at Bosch GmbH in Reutlingen. From 2009 to 2015, I was a research assistant at Johannes Kepler University Linz. In 2015, I headed the mm-wave wireless research group at IHP Microelectronics. I have authored and coauthored more than 100 journal and conference articles. I received the 2018 VDE ITG-Prize and the 2019 APMC best paper award for his outstanding works on integrated mm-wave radar transceivers in SiGe BiCMOS technologies.
I have an expert in the PCB design area. I am interested for analog design and chip design
I am an Assistant Professor in the VLSI vertical of Department of ECE at RV College of Engineering, Bengaluru, Karnataka. I am a passionate teacher who teaches various courses in VLSI domain. My research interests are in the areas of Analog and RFIC Design. I got several opportunities at RVCE to implement various personalized teaching methods for the students, facilitated experiential learning, adapted innovative techniques in teaching and learning through flipped classroom and blended learning approaches. I am currently responsible for the curriculum design and development for courses in VLSI domain. I am also responsible for introducing new electives in specific areas. I have a YouTube channel with 300 + videos on the courses taught so far for the benefit of a wider student community.
Sr VP RnD , VLSI engineering
Interested in Analog IC Design
Microelectronics SME
administrator
I am an Assistant Professor in the Electrical Engineering Department. My research activities are in Neuromorphic Computing and Engineering and span from the development of efficient models of computation to novel microelectronic architectures, with CMOS and emerging technologies, for both efficient deep learning and brain-inspired algorithms. My long-term research goal is to understand the principles of computation in natural neural systems and apply those for the development of a new generation of energy-efficient sensing and computing technologies. My research outputs find use in several application domains as robotics, machine vision, temporal signal processing, and biomedical signal analysis.
Hon-Piu Lam, is a Ph.D. candidate in the Department of Electronic and Computer Engineering of the Hong Kong University of Science and Technology (HKUST). He was an analog IC designer engineer in Valence Semiconductor from 2004 to 2007. From 2007 to 2015, he joined Fujitsu Semiconductor focusing on the embedded NOR flash design. He has been a researcher in HKUST focusing on the integrated power electronic and data converter. His research interests include readout electronics, integrated power electronics and radiation hardened electronics for experimental physics.
Undergraduate Electrical and Computer engineer at Aristotle University of Thessaloniki, in the Electronics and Computing Field.
MS Electrical Engineering Fellow with a focus on Integrated Circuits and Systems Design. Skilled in Cadence (Virtuoso, Innovus and Genus)
I am a PhD student at the Indian Institute of Science Bangalore. I do research in the area of RF and mixed-signal circuit design.
A student of Keio Univ in Japan, interested in analog circuits rather than digital ones.
Graduate student passionate about integrated circuit design for biomedical applications
D Gracia Nirmala Rani received the B.E. degree in Electronics and Communication Engineering from Syed Ammal Engg College, Madurai, India, in 2004, and M.E. degree in VLSI Design from Karunya University, Coimbatore, India in 2007. She has awarded Ph.D. degree in VLSI Design from Anna University, Chennai India in 2014. She is working as an Associate Professor in Thiagarajar College of Engineering, Madurai since 2007. She teaches courses on system/digital and analog electronic design and VLSI processor architectures. Currently, five research scholars are doing their research under her guidance. She has authored or co-authored 42 international journal and conference papers like IET Circuits, Systems and Devices, Spinger, Wiley and Elsevier Publications. Also she has published 3 Books/Book Chapter in Springer LNCS and CCIS Publications. She has filed 2 Patent in BioMedical Engineering Field. She has guided the B.E students’ project which won the India Cadence Design Contest Award 2017 and 2018 instituted by Cadence Design System Pvt Ltd, Bangalore. In 2018, she was the technical program chair of the 22nd International Symposium on VLSI Design and Test. She is serving as a reviewer in IEEE Transaction on Nanotechnology, Elsevier and Inderscience Journals, respectively. Her research interests include RFIC Design, Physical Design Automation, Optimization Algorithms using Machine learning for IC and mixed signal circuits and systems for Bio-medical Devices.
Analog & Memory IC design Engineer
Mixed Signal circuit designer with over 40 years experience.
Hi, I am Fahrettin Atik and ı am a license student at electric and electronic engineering at Karabuk University in Turkey. I am senior now. Generally ı am working on open source analog design project, specially my interest is about to designing Op Amps. Me and my team got third place in Analog Chip Design competition at Teknofest (A National and International Competition held every year in Turkey) I would like to working as a chip design engineer after graduation... That is me.
I am a Masters fellow student of RFCS2 Lab in IC Designing.
I am a avid analog-RF mixed signal designer. Currently I am experimenting with novel design techniques using open-source tools.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
Trying never to sit back and enjoy but to come forward and prove myself
I am en Electronics Engineer currently Pursuing my Masters in IC design from FAST NUCES Islamabad.
I am a PhD student at IISC Bangalore. I work on RF and mixed-signal circuit design.
Technology development in intergrated analog circuits. I'm available to design analog and mixed-signal circuits as an external contractor.
Love for ELectronics Chips Designing, Eager for knowledge. Close to Nature and meet me on the success road.
electronic system designer / software and hardware engineer, embeded system expert, signal expert, proccess designer, researcher, Developer of complexity and reversal wantings. Reverse engineer. i addopt my whole life to this science. thank you for presentings of quantum, psych
I am a Graduate Research Assistant at the University of Tennessee Knoxville, pursuing the PhD degree in Mixed-Signal Analog Circuit design.
Adjunct professor in Columbia University.
Undergraduate Electrical and Computer engineer at Aristotle University of Thessaloniki, in the Electronics and Computing Field.
Man with many Mine set To be a great hero
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Mixed-signal designer
Hi, I'm a student at UACJ and I like integrated circuit designs.
MS in IC Design Fellow, RFCS2 lab at FAST-NU Islamabad, Pakistan
Research Scholar at Department of Electrical Engineering, Indian Institute of Technology Ropar, India. Current research area is EMI Immune Amplifiers. Previous works include a Memristive adaptable ramp generator circuit for a on-chip training signal generator for trainable DAC, Modeling and hardware implementation of digital image watermarking algorithms.
Independent Digital Design and Verification Expert with more than 20+ years of experience and founder of semify. While working for established semiconductor companies like Infineon, Dialog Semiconductor and NXP I was responsible for bringing ideas into working ASICs. I developed USound’s first ASIC from FPGA based prototyping to tapeout with minimal resourcing, demanding timeline and tight area and power consumption constraints. Currently I'm acting as a consultant for easyIC and Cypress / Infineon. In addition I'm is also lecturer at the FH Joanneum Graz and guest lecturer at the Technical University Graz.
An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.
Provides mixed-signal CMOS training to academia using open-source tools and also solution for the consumer and automotive industry.
Principal Staff Engineer, ASIC Design and Development, Chief Technologist, JHU/APL Space Exploration Sector, Electronic Systems Engineering group
Silicon Entrepreneur with extensive experience in Digital Physical Design, EDA and HPC Infrastructures for Electronic Design.
M.Tech (VLSI Design and Embedded System) Actively looking for opportunities in the VLSI field
Engineering Electronic student of National University of Cordoba (UNC), Argentina. Active member of Robust Circuits and Systems Laboratory (LCSR), in exact and natural sciences faculty (FCEFyN).
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
Founder of e-td55 Desing House for analog circuit and sensors
President and CEO
I am designed mixed signal ICs for Music, Audio, IoT and sensor applications.
Analog circuit designer. Nerd.
I am a EE with decades of experience in multiple disciples including analog, RF, bio-engineering, embedded systems design, ... a long list. I've had a long career and am fortunate to be able to follow my interest where ever they might be.
i'm an eletronic engineer there are studing to became an IP desing
Analogue Circuit Designer
An analog mixed-signal circuit designer for low-power precision sensor interfaces. See https://staff.aist.go.jp/ippei.akita/
Analog Design Engineer
Dad. Partner. Scientist. Activist. Maker. — He/His
Artificial Intelligence/Machine Learning • Big Data • Internet of Things • Product Development
IC designer with more than 25 years post Ph.D. experience. Specialising in RF, RFIC, analog and mixed-signal. Wide experience in Architecture, system and circuit design. RF front-end module design for cellular with CMOS PA. Over 40 patents issued.
Hello. I am Liam and Analog enginner in South Korea. I want to participate this great opputinity and share my design to other people.
I have msc in microelectronics from the National and Kapodistrian University of Athens, Greece (EKPA). I am working in IC industry. My passion is Analog Filters Passive or Active. I have a library full of books about Analog Filters my favorite from the Authors Van Valkenburg and Schaumann. Due to the nature of active filters, I am also interested in design of Op Amps
Ph.D. in electrical engineering, 25 years experience in mixed-signal IC design
Electrical engineer with interests in ASIC design, biomedical imaging, and scientific instrumentation.
Analog,RF,Embedded Design Engineer having 2-3 years of experience in PCB Design, CMOS IC Design with hands on RF test equipment and testing experience
Amel is an Digital IC designer interested , used to work on HDL based Design for testability, Formal verification of Semi custom and IP based SOC DFT. Currently, working on IC design for Reliability. She designed a Test structures chip for Bias Temperature Instability characterization and analysis using TSMC 180nm Technology.
Lecturer, Department of Electrical Engineering Institut Teknologi Sepuluh Nopember INDONESIA
I'm a PhD student working to make mixed-signal chip design more accessible, drawing inspiration from software development techniques. Prior to starting the PhD program, I spent a number of years working in industry at both the chip- and PCB-level on optical sensors and power systems.
Mixed-Signal Integrated Circuits instructor and researcher.
Infrism Digital is a UK based competent digital marketing agency providing clients with their expert services in order to grow business and improve its presence on google. We also help our clients establish their social media presence by producing quality content. We make sure that our efforts are directed towards improving the client’s brand image in the market.
PhD Student, School of Electrical and Computer Engineering, Purdue University, USA. Research interests include Mixed Signal Circuits, High Speed Circuits and Digital System Design
Israa Y. I. AbuShawish received the B. Sc degree in electrical and electronics engineering in 2018/2019 (Hons.). She joined the M.Sc. in electrical and electronics engineering from the University of Sharjah in 2019 and in September 2022 she received the degree. She has been working as a teacher assistant with the Department of Electrical and Computer Engineering, University of Sharjah, UAE since 2019. Currently, she worked as a researcher with the research group: Mixed Analog-Digital Smart Electronic Circuits and Systems (MADSECS) in University of Sharjah, which is one of the specialized Research Groups affiliated to the Research Institute for Sciences and Engineering. Her master’s thesis involves the design of low-frequency amplifiers based on highly linear pseudo-resistor and using programmable Analog Building Blocks, such as CMOS rail-to-rail operational amplifiers and Digital programmable operational transconductance amplifiers. She has published several research papers in international conferences and Journals. Her research interests include mixed analog digital IC design, Bio-medical amplifiers and operational amplifier circuit design. Currently she is pursuing a Doctor of Philosophy in Electrical Engineering, at United Arab Emirates University (UAEU).
I started my passion a year ago, I was supposed to do my radio-ham license but it has been postponed. So in the meantime instead of just waiting I started to learn about signal processing. I bought an SDR, built my antenna a (double cross), then I bought a yagi 70cm - 2m. I also designed my upconverter to be able to get a bunch of different ranges that my SDR would not catch. I'm now building a cubesat Simulator. Using a raspberry pi and an STM32.
I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.
I am a professor of Neuroprosthetics at Newcastle University. My primary interest is in developing implantable medical devices to treat neurological conditions.
Electrical Engineer interested in the design of mixed signal ASICs
Microelectronics Enthusiastic, Vast experience in embedded design for various domains.
Adroitec Systems is design Services Company for the VLSI and Embedded Software. Founded in 2017, Adroitec Systems is having Register Office at Visakhapatnam with branch offices in Bangalore. Adroitec Systems delivers cutting edge solutions across a diverse portfolio of services including Physical Design, Physical Verification, and Design Verification. With about 50 highly qualified employees.
Semiconductor technologist with deep expertise in device fabrication and mixed signal circuit design for high-performance compute applications.
working as a assistant professor in the department of ECE ICFAITECH
M. Pardo (Senior Member, IEEE) received the B.S. degree in electronics engineering from Universidad del Norte, Barranquilla, Colombia, in 2002, and the M.Sc. and Ph.D. degrees in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, USA, in 2007 and 2012, respectively. He is currently an Electronics and Electrical Engineering Department Graduate Programs Coordinator with Universidad del Norte and leads the electronic analog design area. His research interests include the areas of oscillators, energy harvesters, and renewable energy systems.
RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.
Digital Design Engineer
I am an analog design engineer with over 10 years of experience. Most of designs lie in the field of power management (DC/DC converters), frequency synthesis (phase-locked loops), wireless power and data transfer (NFC front-ends as well as medical implants).
I'm the CEO of a fabless semiconductor start-up company and have more than 15 years experience in designing mixed-signal ASICs on various foundry processes.
Engineer / VP
I am an Engineering Student from a computer science field, but still want to learn about chip designs.
My name is Sunil Parmar, I have done a master from IIT-Bombay in 2005 and a bachelors from Gujarat University in 2003. After post-graduation, I joined a service company in Hyderabad and later worked with Intel Bangalore. I have worked with the Samsung R&D center in South Korea for Silicon photonics applications and later contributed in Samsung's DDR4 memory IO design. As an employee, I have published few patents and papers. In 2016, I returned to India with a very ambitious goal to set up a semiconductor product company called Powency Circuit Private Limited in the power management domain. In between, After Covid, I decided to develop a MEMS Microphone product and started a project called Sikern. We are currently a small team having three design engineers, one packaging expert and one management staff. We are working with a Japanese supplier and a Malaysian packaging group for our product development. And developing our own ASIC for this MEMS microphone. We started working with a smartphone customer in India for their upcoming mobile model. And hope to work with many more customers within India as well across the globe for our Microphone product.
I am Full Professor and Head in the Department of ECE, NEHU, Shillong. My research area is Silicon Photonics, Optical Communication, Photonic Integrated Circuits.
As an analog / mixed mode designer for over 30 years. Innovators and always curious over new things.
Full-Time Professor of the Research in Computer Centre of the National Polytechnic Institute of Mexico. My principal area of work is related with the CMOS Analog Design, Digital Design, Soft Computing and Bioinformatics.
Analog IC Design Engineer for research and development of ultimate power supply miniaturization using custom eGaN IC.
A software developer, technology manager, and hardware tinkerer aspiring to imbue slices of crystals with intelligence.
Professor Alex James received the Ph.D. degree from the Queensland Micro and Nanotechnology Centre, Griffith University, Brisbane, QLD, Australia. He works as a Professor of AI hardware at School of Electronic Systems and Automation, and Dean (Academic) at Digital University Kerala. He works in the broad area of brain-inspired systems, memristive systems, intelligent semiconductor devices, analog circuits and imaging systems. He is Prof-in-charge of Maker Village that supports over 80+ hardware startups. He is Chief Investigator of the centre for Intelligent IoT Sensors, and India Innovation Centre for Graphene, developing new products to the market. Dr. James was the founding chair for IEEE Kerala Section Circuits and Systems Society. He is a member of IEEE CASS Technical committee on Nonlinear Circuits and Systems, IEEE CASS Technical committee on Cellular Nanoscale Networks and Memristor Array Computing, IEEE Consumer Technology Society Technical Committee on Quantum in Consumer Technology (QCT), Technical Committee on Machine learning, Deep learning and AI in CE (MDA) , Member of BCS’ Fellows Technical Advisory Group (F-TAG) and Member of SIG on Electronics for Agrifood.
Design Consultant
FUTURA AUTOMATION has been into custom design and manufacture of Rugged Computers and Displays since 1992. Over the last few years we have successfully designed and developed many Rugged Computer Systems used in critical defense, Space and Industrial Applications like Battle Field Surveillance Systems , Radar Tracking Systems, Satellite Tracking and Launch Systems and SCADA applications.
I am a current Master's student in IC (Integrated Circuit) and Systems Design, as well as a Research Assistant at the Micro Nanoelectronics (MiNE) Lab located at SEECS NUST. I completed my Bachelor's degree in Electronics Engineering from UET Peshawar. As a member of the MiNE Lab team, I am involved in cutting-edge research in the field of micro and nanoelectronics, with a specific focus on the design and development of integrated circuits and systems. My academic and research background has provided me with a strong foundation in electronics engineering, and I am passionate about utilizing my skills to contribute to the development of innovative technologies in this field.
Currently an eighth semester student of electronic engineering, interested in IC design and continue learning, with experience in verilog, matlab, digital design, TSMC 180 nm design kit. As a student I have also taken the support of subjects in my career as a funament of analog circuits.
I am interested in increasing my experience and knowledge, helping people especially students and young professionals. Making a positive impact in my surroundings is my main concern. ★ I received my B.Sc. in Electronics and Communications Engineering from Minia University, Egypt in 2013. ★ I received my M.Sc. in Electrical Engineering from Minia University in 2022. The thesis title was: Design of Programmable Multi-Standard RF-to-Digital Receiver for Wideband Wireless Applications. The work included: ⦿ Modeling PWM based Software-defined radios using Matlab ⦿ The design of a high-speed comparator using TSMC 65nm technology on Cadence Virtuoso EDA. ⦿ I have experience in analog/mixed signal design, modeling using Matlab and simulation using Cadence Virtuoso and ADS. ⦿ I have research experience and scientific writing skills. We published three papers in international conferences based on this thesis. ★ I am a full time EHV OHTLs and cables Projects Engineer in EETC. ★ I worked as an OHTL installation and maintenance Engineer in EETC for four years. I supervised over renewing and installing new OHTL besides the daily maintenance tasks.
Adjunct Professor - Pratt School of Engineering at Duke University
Usman received B. Sc. Electrical Engineering from University of Engineering and Technology, Peshawar, Pakistan, in 2006. He obtained M. Sc. Electronic Engineering from GIK Institute of Engineering Sciences and Technology, Swabi-Topi, Pakistan, in 2008. He completed his Ph. D. in “Sensorial and Learning Systems Engineering” from University of Rome "Tor Vergata", Italy, in May 2014. During doctoral studies, he visited Nanoelectronic Science and Engineering Laboratory (NESEL) of Sungkyunkwan University (SKKU), South Korea, for six months. After completing Ph. D., he pursued post-doc research at initially Tor Vergata (1 year) and then at NESEL (2 years). In December 2017, he became a Research Professor at SKKU which he pursued for one year. In December, 2018, he joined School of Electrical Engineering and Computer Science (SEECS), National University of Sciences and Technology (NUST), Islamabad, Pakistan, as an Assistant Professor. Since February, 2021, he is an Assosiate Professor at SEECS. He has so far published 22 articles in top-tier Journals and had delivered eight conference talks. Since 2015, he has also been a reviewer for Nanoenergy and Sensors MDPI. His research interests include micro-nano systems, nanoelectronics and electronic interfaces for micro systems.
Analog Mixed-Signal Engineer at InertialWave. Developing next gen electronics for resonator control and sensing.
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
Designer creating analogue circuits for instrumentation used in medical and physical sciences.
Estudiante de la Universidad nacional de Cordoba de la carrera de ingenieria Electronica investigador en sistemas embebido y programacion y microelectronica
I majored in electronic science and technology for my undergraduate degree and integrated circuit engineering for my postgraduate degree. During this period, my research direction was analog integrated circuit design and application.
Taher Kourany joined Scenario Design Services, Cairo, Egypt as a Senior IC Design Consultant in 2016. He received B.Sc Degree in electronics and communications engineering from Ain-Shams University, Cairo, Egypt, in 2012. He received M.S. degree in electronics from the American University, Cairo, Egypt, in 2015. Until October 2015 he was a Research Assistant with the Center of Nanoelectonics and Devices Research Labs at Zewail City for Science and Technology. Mr. Kourany has published papers in the field of time complexity reduction algorithms of floorplan representations, area and wirelength minimization, Pareto-front multi-objective optimization algorithms of highly chaotic systems. His current research interests include high linearity Power Amplifiers, time complexity reduction algorithms, data structures, parameters estimation of highly chaotic systems, and the synthesis of analog IC design and layout.
Associate professor of Microelectronics at University of Cagliari, Italy
PRODUCTS AND CONSULTING IN AEROSPACE, SEMICONDUCTORS, SAAS, ROBOTIC EQUIPMENTS, COMPUTE SYSTEMS, QUANTUM, TELECOM AND INDUSTRIAL.
I have over thirty years of experience in the semiconductor industry, having worked in fab, EDA and design engineering. have built and led large, geographically distributed teams at a senior manager level. I am passionate about developing talent and skills, particularly in young people from socio-economically underprivileged backgrounds.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
I am a faculty in the department of Electronics and Communication Engineering, National Institute of Technology Arunachal Pradesh, India. Besides, I am associated with the Special Man Power Development Program in the department to undergo research in VLSI. My interests include temperature sensors and SerDes design. I am familiar with Cadence Virtuoso and vigorously monitoring students working in the said areas.
Analog and Mixed signal IC designer
Sr. Electrical Engineer with 40 years of experience, doing R&D, circuit design from concept through layout and to production in Aerospace, Automotive, Industrial and Gas and Oil down-hole business sectors.
Simple and understanding
Analog-RF IC circuit and system design engineer.
Hello, my name is Usama Ishfaq. I am an electronics engineer with expertise in IC design. With years of experience in the industry, I have developed a strong understanding of the complexities involved in designing and developing integrated circuits. My passion for electronics and technology has driven me to constantly learn and innovate, ensuring that I stay up-to-date with the latest advancements in the field. I take pride in my ability to work collaboratively with teams and clients to deliver high-quality solutions that meet their specific needs. Thank you for taking the time to read my introduction.
He is Full Professor at FEI University Center (Centro Universitário FEI). The principal activities/research are developing new hardness-by-design devices (new layout styles for MOSFETs), sensors, and analog and radiofrequency CMOS ICs designs. He founded MTG2i Solutions Co., which provides analog and radiofrequency CMOS CIs and IPs design services using iMTGSPICE. This computational tool integrates the heuristics algorithms of optimization of the Artificial Intelligence and the expertise of the designers (Human Intelligence). Consequently, it significantly reduces the design and optimization cycle time, reducing the design cost to the companies.
A designer, a PhD, Who simply love Circuit design
University researcher
I am an Undergrad Student from KNUST, Ghana and I am currently reading electrical and electronics engineering. And I am more interested in how I can incorporate Machine Learning into HDLs.
Graduated as electronic engineer in '93. Think it could be nice and fun to try out this part of the electronic life/world :). I have worked a lot with digital designs over the years, everything from small LED controllers to larger computer boards. And then I am a PCB geek.
Product design and development
UCLA graduate student studying IC Design
I am a professional in the field of Chip Design, Primary working on Synthesis, Physical Design, Static Timing Analysis and Physical Verification
Based in India, developing a new SoC type.
A PhD student working in WEST (Wireless Environmental Sensor Technology) Lab with a focus on Analog IC design.
In the electronic age, privacy is our shield — allowing us to reveal ourselves by choice. As the musica universalis guides the universe in harmony, so should our creations. Let's ignite a new Renaissance, driven by humanism and curiosity, a harmonised future of automated world, echoed with the music of human potential. 一期一会
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. Hugo is an Analog/Mixed‐signal design engineer with strong background in IC design techniques, industry experience on ASICs for sensoring applications and hands on experience in 28nm, 55nm, 65nm, 130nm, 180nm and 0.35um CMOS process nodes. Research interests include Low power Data Converters, SAR ADCs, DACs, PLLs and Low power analog design.
A dedicated Physical Design Engineer aspiring to craft silicon for real-world applications.
I am a master's student studying Integrated Circuit Science and Engineering at Xi'an University of Electronic Science and Technology in China. I aim to enhance my experience in analog integrated circuit design through participation in Google open-source projects.
I am into Analog and Mixed Signal designs. I have been involved in creating ASICs for 30 years.
MSECE student at Ohio State University with focus on Analog & Mixed Signal VLSI circuits
I am a researcher in VLSI domain and Assistant Professor at DIAT India
B. Tech from IIT Bombay 73 elec and Masters from Philips Holland 75 and working on design and development 1975 till date
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
I am working as an asssociate professor in EC departments, at Dharmsinh Desai University, Nadiad, Gujarat. I am working in the field of Analog and Mixed signal Design. I had proposed small size CSDAC in my phd work and now I am working on 16 bit bidirectional data bus to communicate two ICs at different voltages. I want to prepare IC for it.
I do research in the field of mixed-signal IC design in various areas like biomedical, space research and consumer electronics.
I am a student of nit trichy college pursuing b.tech.i am actually interested in semiconductor sector. That's why I visit efabless.com
I am really interested in Research for progressing my work in RF electronics
I have worked in Texas Instruments for almost 5 years. I am trying out a new software
Program Manager for a software development start-up
I love to learn and make things. RF, power electronics and AI/ML get me really wondering, what could we do with all of them.
As a PhD candidate in Electrical and Computer Engineering at Rowan University, I am passionate about designing domain-specific customized hardware accelerators using Hardware Description Languages. I am currently a Graduate Research and Teaching Fellow, working on projects related to computer hardware architecture, digital design, and VLSI design. I have expertise in VHDL, VERILOG, and Scala, and experience with testing, debugging, simulating, and waveform analysis tools. I also have a strong background in computer architecture, SOC design, and reversible computing, and knowledge of C/C++ programming languages. Additionally, I have secured multiple grants from the National Science Foundation for conducting customer discovery interviews in the domain of scientific computing. I have also published several papers in international journals and received the Young Researcher Award in 2020. I am a team player, a leader, a mentor, and a public speaker, with skills in interviewing, collaborating, and empowering others.
vlsi design Researcher, assistant professor
Adjunct Professor and Chief Mentor, Advanced VLSI Lab Silicon University, Bhubaneswar, India
I'm a BTech Electronics and Instrumentation graduate and an electronics enthusiast who was inspired by the open-source silicon technology and it's accomplishment and aim to build a career for myself in VLSI specifically as an ASIC Physical Design Engineer.
Abdullah Muammar is a university student who loves learning in many areas of life
I am a research scholar in the Electronics & Communication Engineering department at the Indian Institute of Technology (IIT) Roorkee, Roorkee, India. My research area includes Analog/RF and Mixed signal circuit design, mainly focused on Phase Locked Loops (PLL).
Bachelor of Electronic Engineering, with an interest in technological development and innovation, especially in microelectronics and Analog Design.
A passionate individual interested in fusion of energy efficient computation and nanoelectronics along with its integration in conventional technologies and deployment to solve pressing challenges
I'm an person who is interested in electronics and computers my whole life. I like to design chips and pcb's.
Recent MSEE graduate from ASU specializing in Analog Circuit Design eager to contribute my knowledge and passion for designing innovative circuits. Bringing a solid theoretical foundation and a commitment to excellence. I am eager to contribute to cutting-edge projects.
Founder / director of SLICE Semiconductor, specialising in analog IC design contract services and high performance mixed signal ASIC solutions.
I am a computer engineer with 8 years experience in developing and deploying innovative solutions in the following areas: Analog, digital, embedded systems, network infrastructure and Internet of things (IoT) hardware (PCB and firmware programming), Phonotaxic pest control systems, bioelectronics for detection of volatile organic compounds of infectious diseases, Monitoring, evaluation and process control, Artificial intelligence, machine learning, deep learning and computer vision. Robotics and drones If you want to build, design, repair, maintain or integrate any kind of hardware, feel free to DM. I also do product management and development of all kinds of softwares including those you think can’t be done in Nigeria. If you need help for any project you’re working on, including academic projects just contact me and I would to assist to the capacity which my spare time can allow, you don’t have to pay if you are a member here.
analog and power IC designer. multiple commercial projects experiences.
I am a doctorate in Electronics Instrumentation and working as head of an Engineering Academic Institution. Fields of interest include Chip Designing.
Hellow My self Ali Gul currently pursuing my bacholar degree in Telecommunication Engineering From Quaid-E-Awam University Of Engineering Science & Technology Nawabshah and Hunger of gain some practicle knowlwdge in Circuit Design And Networking
Courtois Correct Smart Colabaratif
Web Developer, Business Start up.
As a VLSI enthusiast, I completed a 6-month internship as a NAND product engineer at Micron Technology where my work comprises of post-silicon validation, data analysis using JMP, and testing NAND components under varying PVT conditions in DDR3 and LPDDR4. I'm passionate about CMOS and have experience simulating NAND output drivers through HSPICE simulations in collaboration with the design team. Additionally, I have proficiency in System Verilog, RTL design, and a solid grasp of digital IC, analog IC, and physical design. I hold a master's degree in Microelectronics from BITS Hyderabad and a bachelor's degree in ECE from Gayatri Vidya Parishad. I achieved a GATE ECE score of 571 with an All India Rank (AIR) of 1404 in 2023. devadeepreddi20@gmail.com
Linkedin page: https://www.linkedin.com/in/yaqub-mahnashi-4a988647/
I am a final year in BE in Electronics And Communication in Canara Engineering College
