Co-Founder and Director of Silizium Circuits Private Limited.
im a student who want learn design VHDL
Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
Cybersecurity nut, hardware hobbyist, nature enthusiast, amateur trumpet player. I also play World of Warcraft with my dad on the weekends.
Aspiring analog IC designer
Analog systems and circuit design engineer with extensive product development and applications experience with a strong focus on end markets. Proven ability to work closely with a diverse set of customers and clients to properly specify the requirements of a mixed-signal ASIC. Ability to manage product development from foundry selection through design, tape-out, and mass-production.
I'm an experienced Analog Mixed Signal IC design engineer with 20+ years of experience in Analog IC level design, analog system modeling, layout, and lab testing. Areas of expertise are SerDes, ADC, DAC, PLL, RF , Base Band, Band Gap, Opamps.
I'm an AMS Design engineer. I like the IC design world and my recent goal is to be a scientist :)
I have been working on Analog/Mixed-Signal Integrated Circuits design since last 16 years. I graduated from NED UET, Karachi in 2001 and then worked with Avaz Networks, a Silicon-Valley Company on RTL design and verification of a high-density Line Echo Cancellation Engine for a couple of years. Joined Linkoping University, Sweden in 2003 for Masters in SOC, which concluded with a Masters Thesis on Sigma-Delta Modulators with Fraunhofer Institute of Integrated Circuits, Germany in 2005. The same year I joined University of Trento and Fondazione Bruno Kessler, Trento, Italy for my PhD on Readout Interface Design for MEMS Capacitive Microphones. Worked with ST-Microelectronics, Milano and Analog-Devices, Copenhagen as a Guest PhD Student. This Phd results in 20+ publications and 2 patents with 3 successful MEMS Readout ASICs.
I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.
I have more than five years’ experience in electronics integrated circuits industry. I have been involved in more than six silicon runs which were all successful and meeting expectations.
Developer of open source EDA tools on Open Circuit Design
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Electrical Engineer M.Sc. Microelectronics
Working as a instruments engineer, and currently working on my masters of Microelectronic Systems Design. Passionate about designing analog/mixed signal IC's and systems
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
I am an EMC Specialist working at Renault and currently looking to fill my free time with interesting projects (Hardware, EMC, Design, Simulation)
I am a digital design/verification engineer. I have 2 years of full-time industry experience. In total, I have 4.5 years of experience in RTL design, Electronic Design Automation and Verification using VHDL/Verilog, Perl, Tcl and Linux. I was the #1 graduate of Bahcesehir University in Mechatronics Engineering in 2013
I'm VLSI Design Engineer aspirant and like to work on design challenges in VLSI domain. I like to keep updated of cutting-edge technology in my field of interest.
Analog/Mixed-Signal IC Design Engineer
Mad about OSS system design, specialized in video compression and image processing, CNN and dedicated HPC architectures. New deals in low power design
Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.
senior student-ECE departmant-faculty of engineering-ASU.
Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.
HW development engineer
Graduated 4 tears back in engineering specialized in electronics and telecommuniation engineering with a first class. Now I am working at a startup as the team lead of the embedded design team. I am also a postgraduate student in Msc in wireless communication engineering course. Creon Solutions is my freelancer name. I do image processing, PCB and circuit designs ...etc in Freelancer.com
I've been worked as an Electrical Engineer for more than 20 years. I'd like to bring Artificial Intelligence to the EE design so that it can be "Self-driving".
I am a Master Degree holder in VLSI Design. I am interested in Analog Circuit Design.
Master's student at UFCG. Work with Cadence tools. I work with AMS and digital circuits (using Verilog language) and analog layout as well.
Fresh grad electronics engineer and a beginner circuits designer who admires analog/RF IC design. Former intern at ADI© (Egypt) and recently a junior Analog IC designer at Si-Ware Systems (Egypt). My GP was a 5G Transceiver in the band 26.5GHz - 29.5GHz, I designed the upconversion mixer (core circuit, power combiner, LO driver).
I am an Analog design engineer graduated from Ain-shams university in 2018. My graduation project was to design a Decision Feedback Equalizer in a 10 Gb/s serial link transceiver, starting from building the circuit from scratch to layout and post layout simulations and system integration.
I am an Analog IC Designer by profession. I have loved and done circuit design from my high school days in India. I love developing new challenging circuits and seeing them work in real applications.
Graduate student of ECE department Ain Shams University, and Currently Master Student of ECE department Cairo University with major of Electronics design.
I am a senior researcher in INESC-ID, Lisbon.
I am an electronic hobbyist who enjoys building different electronic circuits and systems.
Digital designer experienced in high-speed ASICs for optical/copper transceivers, including DSPs, error correction and SoC support.
I am an Electronics Engineer with experience in IT Management, Firmware Development and Education. I spend my spare time looking for interesting projects and reading about technology trends.
I works as junior physical design engineer and I have passion in VLSI field specially in digital IC design. I have experience in writing RTL, test benches and in PnR flow.
35 years mixed signal SoC, ASIC, and FPGA design and management experience. Concertal provides rapid functional IP integration using proprietary System Design Automation technology that includes delivery of RTOS capable fabric that supports loosely coupled HW operation including IP NbC (Network beyond the Chip). IP areas of expertise include common interfaces, data converters, modulators, digital filters, DSP, processors, FSM, and other custom specified functionality.
I am researcher with goals of developing high end technologies for the future.
Teaching assistant for ASIC/FPGA and digital ICs courses.
José T. de Sousa holds a PhD degree from Imperial College London (1998) and has been a university lecturer and researcher at Lisbon University (1999-present). He holds 4 international patents, is co-author of one book, and was General Chair of the Field Programmable Logic and Applications Conference in 2013. Dr. de Sousa has published more than 70 technical papers in international journals and conferences. He was co-founder and CEO of Coreworks, a semiconductor intellectual property company, which he ran from 2001 to 2013. His specialties are digital circuit design, hardware/software architecture, technical team management and semiconductor IP marketing and sales.
Electronic design house subsidiary of Cinvestav Guadalajara Unit (Center for Research and Advanced Studies), a leading research center in Mexico.
Computer Science and Mechanical Engineering student
Associate Professor (Electrical and Electronic Engineering) Implantable chip design Low power sensors
Analog circuit designer with passion in taking challenges .Interest in ADC,DAC,PLL,SDADC,LDO.Done layout of all these blocks.
designing mixed-mode ASICs since 1986 :-)
Physical design engineer
Experienced Analog Design Engineer with strong background in HV CMOS ASICs.
Electronics Engineer with 10 years experience in microelectronics and research. Familiar with CMOS integrated circuits design, wireless communication systems, programming and lab environment, I am comfortable working for worldwide semiconductors firms. Passionate for high-tech and music, advocate for teamwork and collective intelligence to support a strong problem-solving methodology, I am curious, self-motivated, addicted to learning and re-shaping the new technologies I am exposed to. During my workday I aspire to address "real-life problems", hopefully continuing to develop my multi-disciplinary skills as a means for technical and personal enrichment.
Electronics Engineer and Researcher with a demonstrated history of working in the higher education industry. Skilled in CAD/EDA tools for ASIC, PCB and FPGA design, scripting and programming. Education professional with a PhD in Electrical Engineering and Computer Science from University of Nis, Faculty of Electronic Engineering Nis, Serbia.
An experimental physicist through sensor and instrumentation development.
I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.
Umer Imran is eager to work in the field of Computer Architecture and Memory Consistency. He is currently working as a Design Verification Engineer at Lampro Mellon, a training firm with the vision to transform Pakistan’s talent pool into leaders of RISC-V based SoC design. He constantly aims to gain expertise in the various domains of SoC Design including IP Design, ASICs, and low power architectures.
Vice President of Engineering - Seamless Microsystems. We design high performance AFEs using proprietary and patented technology that encodes the signal in the time-domain instead of voltage or current. This enables us to design low-power ADCs and amplifiers in scaled CMOS. Contact us if you'd like to hear more and engage our services.
Professor in Electronics Engineering with a PhD. in VLSI (Universidad Nacional de Mar del Plata). Expertise in digital RTL and physical design. Experience in FPGA RTL and HLS design for heterogeneous computing. Knowledge in sub-threshold analog design. Fiction writer (National Literature Award for Novel, 2011, Costa Rica)
A young and ambitious individual, eager to apply my knowledge of Computer Architecture and VLSI Physical Design to develop hardware that is performance, power and area efficient, while actively contributing to the development and growth of the open-source semi-conductor industry
Managing Partner
Interested in Design, Verification, and Hand-off of Analog IPs. Worked on the definition, modeling, design, verification of DC-DC converters, Chargers, Ideal-Diodes, LDOs, Regulators, Bandgap references, Current limiting and sensing architectures. Excited for challenges in Analog Design, Layout and Post-silicon verification.
Passionate about engineering and electronics. Love teaching and mentoring. Highly experience in analogue and RF electronics and enjoy managing projects.
Eduardo is an Electrical Engineer engaged in hardware development with a true passion for developing and enhancing applications. While at university, he worked in a variety of projects, from VHDL in a SOC project, to a PCB for a power circuit, and even web interfaces for electronic devices network connected. He allies his technical background with great communication skills. He is used to and is passionate about working in diverse cultural environment as was his period as an international student in Japan. He also got a certification in in Digital Integrated Circuit Design and Project Flow with Cadence tools (IC Brazil Program). Currently he works at HT Micron, and is interested in positions related to chip design, hardware design, embedded software development and similar areas.
I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.
An experienced mixed-signal IC design engineer / design manager with over 25 years experience. Has design and led the design of multiple mixed-signal ICs through to tapeout and silicon verification. Also experienced with the delivery of IP blocks. Worked across multiple market sectors.
I am a senior Electronics and Communications Engineering student at the Faculty of Engineering, Ain Shams University, Cairo, Egypt. I have wide knowledge and some experience in analog electronics with huge passion towards it
Research engineer and teaching assistant in microelectronic, microsystems and bioelectronic at the university of Liège, Belgium
Design engineer with combined R&D and industrial experience in developing analog/mixed signal ICs for applications including inductive position sensors and imager readouts. Proven abilities with widely used blocks including (but not limited to) filter, amplifier, ADC, DAC, voltage regulators, bandgap reference, ring/LC oscillator, comparator and custom digital logic circuitry. Experience with full tape-out flow including schematic design, analog/mixed-signal simulations, floor planning, layout, system-level verification and chip measurements. Strong familiarity with industry standard tools and instruments used for design, verification and testing such as Cadence, Synopsys, Mentor Graphics, and Keysight. Frontend digital hardware design (ASIC/FPGA) experience using Verilog HDL. Considerable exposure to ASIC backend flow (synthesis and PnR) using Synopsys Design Compiler and Cadence Innovus. Skilled with programming platforms such as MATLAB, C++, C#, Perl, UNIX Shell and VB. Strong education with Ph.D. and MSc. degrees in Electronics Engineering along with several peer-reviewed articles in IEEE journals.
Currently working as Assistant Professor, Quaid-i-Azam University, Islamabad, Pakistan.
Self-taught Electronic Engineer with a lot of experience in programming. I consider myself creative, analytical and dynamic, through my studies I have developed the ability to face and lead changes; I am interested and committed to continuous improvement in a globalized world, both professionally and personally. Being able to contribute what I have learned and add value, thus learning from the opportunities in today's working world.
I am an electronics engineer currently working as an intern in STMicroelectronics.
I am currently an Associate Professor in the Electrical and Computer Engineering Department at North Carolina Agricultural and Technical State University (NC A&T). As director of the Automated Design for Emerging Process Technologies (ADEPT) laboratory at NC A&T, I research the following questions: (1) how can we make computers more reliable in harsh environments (i.e., ionizing particles, malicious fault injection) and (2) how can we extend Moore’s law (e.g., 3D IC)? To answer these questions, he interrogates the traditional abstraction layers of integrated circuit design (i.e., functional description, circuit design, physical design) to discover design methodologies that are more relevant to these goals.
ASIC architect and designer. Specialize in deep learning, video, image and signal processing, and compression. Professor of Electrical and Computer Engineering at The College of New Jersey.
Masters in "Integrated Circuits & Systems" focused on Analog / Mixed Signal System/ IC design
Research Scholar | Analog Circuits | EMI Immune Amplifiers | Neuromorphic Circuits
Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
Aspiring IC Design Engineer
Assistant Professor (IISc) | Ph.D. & S.M. (MIT) | B.Tech. (IIT-KGP)
A student of Electrical Engineering excited about ASIC design. My interests include Co-Processors and Computer Architecture.
I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/
Motor control group at EE, UET strives to develop technologies in the domain of DC motor control, closed loop (PID) servo control, 3-phase AC (PMSM, ACIM) FOC control, targeting home appliances, industrial, robotic and EV applications.
Still an entry-level electronic engineer. Absorbing and practising information and knowledge. Just for curiosity and fun.
Pursuing masters in VLSI at IIT INDORE.
I am a PhD student at Universiti Kebagsaan Malaysia. My research interests include application-specific hardware design, mainly to accelerate machine learning applications.
Engineering Consultant with 20 years of experience in RF and Analog Circuit Design
I just finished electrical and electronics engineering. I want to develop myself in the semiconductor field
MS Research Scholar at Indian Institute of Technology, Tirupati
Principal engineer leading PNT product development at GE Aerospace
BS EE from Stanford University and Digital Designer. Areas of focus are computer architecture, VLSI, and Analog IC. I am interested in making chips to test myself.
MS ECE (Nanoscale devices and systems) at UCSD
I am a college student and going to do Masters in VLSI
I am an Associate Professor teaching VLSI design, hardware security, and digital circuit design at Drexel University. My research interests include analysis, modeling, and design methodologies for high performance digital and mixed-signal integrated circuits, power management for SoC and microprocessor circuits, hardware security, including digital and analog obfuscation and Trojan detection, and electric and thermal modeling and characterization, signal and power integrity, and power and clock delivery for heterogeneous 2-D and 3-D circuits.
A researcher and VLSI guy
Kashif Inayat currently working as a doctorate fellow researcher at System-on-Chips (SoC) Laboratory, Electronics Engineering Department of Incheon National University, South Korea. He considers himself fortunate to have the opportunity to work under Prof. Jaeyong Chung at Incheon National University. Prior to starting his Ph.D., he completed his Master of Science in Electronics and Computer Engineering (ECE) from graduate school, Hongik University in 2019 under the supervision of Prof. Seong Oun Hwang. Moreover, during MS studies he worked at Information Security and Machine Learning Lab, Hongik University, South Korea as a graduate researcher for 2.5 years. Furthermore, he chaired the special sessions at International Conference on Green and Human Information Technology (ICGHIT 2019), held in Kuala Lumpur, Malaysia (Jan, 16-18, 2019). Moreover, he is a registered member of the Pakistan Engineering Council and a reviewer for the IEEE Access Journal.
Ph.D. scholar in electrical engineering department at IIT Indore
Passionate student of electronics and computer engineering
Postgraduate student at IIT INDORE
Undergraduate student At Indian Institute of Technology Goa Interested in analog electronics, digital electronics, circuit design
Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.
Digital design engineer Msc Student at cairo university Faculty of Engineering
A hard working IC Design master student aiming excellency and professional experience in the field of Integrated Circuit Design specially analog and mixed signal design like Data converters, LDO, Opamp and Bandgap reference.
Doctoral student at the Tokyo Institute of Technology.
An aspiring Analog/RF IC designer aiming to make a difference through existing knowledge and innovative ideas.
Planning to enter a master's degree program in 2023. Currently employed in consumer product manufacturing. Personal project experience in embedded systems, digital verification, and RTL for FPGAs.
I am passionate about all areas of VLSI Design and trying my level best to be an expert in the entire flow, analog, digital and mixed signal. Beyond chips, I like poetry, skating, skydiving, late night swimming and trekking in no particular order.
Analog mixed signal IC design professional with 22 years of experience
Experienced SW developer (C/C++/C#) and digital HW designer (SoC/FPGA)
I’m a research student at Odisha University of Technology and Research working for better understanding of Low Power Electronics Circuit . My research and career interests lie in the Application specific Integrated circuits and Analog Mixed Signal with expertise in circuit design and programming. With a board skill set covering the important facts in the semiconductor industries, I am looking for exciting opportunities in the same. I enjoy generating new ideas and devising feasible solutions to broadly relevant problems. My colleagues would describe me as a driven, resourceful individual who maintains a positive, proactive attitude when faced with adversity. Currently, I’m seeking opportunities that will allow me to develop and promote technologies that benefit human society.
Currently working as a Graduate Instructor in the department of Electrical and Computer Engineering and pursuing my Ph.D. in Electrical Engineering at the University of Missouri-Columbia. My research focuses on the development and design of low power decision-making Integrated Circuit (IC) using different type of Ai/Machine-Learning techniques. Besides researching on developing future technology, I'm also a professionally trained Vocalist in traditional South-Asian music majoring in Tagore and have experience in freelancing of 5 years in Digital Art and Graphics.
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
I am an Electrical Engineering working VLSI design farm with 7 tape-out experiences.
Iam an Under-graduate currently pursuing B.Tech 3rd year in Electronics and Communication Engineering at Rajiv Gandhi University of Knowledge and Technologies, campus in Nuzvid, Andhra Pradesh 521201
I am a VLSI enthusiast looking for an opportunity to make my career as a Design engineer in the Hardware Industry.
Ph.D Student studying analog/mixed-signal VLSI at Brigham Young University
Program manager with more than 25 years experience in the semiconductor industry. Expertise in EDA tools, analogue, RF and high-voltage PDK development, sensor design, design support for electro-magnetic compatibility, ESD and functional safety.
Beginner Digital Designer
I'm a double-degree PhD candidate at University of São Paulo and Communauté Université Grenoble-Alpes with experience in analog/RF design and layouting at integrated technologies and interposers, with experience in slow-wave devices.
Professor for microelectronics
I am a PhD student at National University of Sciences and Technology, Islamabad
i am a tech enthusiastic i love exploring new circuits by designing them want to learn about this
Hardware Systems Architect at AroLeap
My area of interest is Analog and Mixed signal circuit design. I teach Electronic Circuit, VLSI design and Signals & Systems for under graduate students and Analog Integrated Circuit Design, Data Converters and Clock & power management circuit courses for Masters students. I also teach VLSI lab courses for both both undergraduate and masters students. Every year I supervise both undergraduate and masters students in analog circuit design projects. Presently I am involved in SRC project as Co-task leader in Analog and Mixed Signal circuit verification project using Machine learning techniques.
Engineer: Electronics, Software, Firmware, Applications, PCBs, Chips. Business owner, consultant.
Juan Camilo Castellanos received in 2009 his B.S. degree in electronic engineering from National University of Colombia in Bogota, Colombia. In 2011, he received the M.S. degree in electrical engineering from State University of Campinas, Brazil. Later, he enrolled in the Brazilian IC design programme, called CI-Brasil. In 2013, he was analogue and mixed signal designer in the non-volatile memory group at Freescale Semiconductors (Now NXP) in Brazil. He received the Ph.D. degree from Eindhoven University of Technology, The Netherlands in 2018. He was lecturer in the Informatics Department at State University of Ponta Grossa in Brazil. In 2019, he was professor at the department of mobility engineering at Federal University of Santa Catarina (UFSC), Brazil. Since 2020, he joined as professor at the Department of Electrotechnics at Federal University of Technology - Paraná/Brazil (UTFPR). His research interest includes embedded systems (IoT, smart sensors, sensor fusion, DSPs, microcontrollers, FPGAs) and analogue and mixed-signal integrated circuits for power management (DC-DC converters, charge pumps, LED drivers and current/voltage monitors, energy harvesting).
Experienced Senior Design Engineer with a demonstrated history of working in the electrical and electronic manufacturing industry. Skilled in DAC, SPICE, ADCs, Electronics Hardware Design, and Management. Strong engineering professional with a M-Tech focused in VLSI System Designs from Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering &Technology and also a B-Tech Degree in the field of Electrical, Electronics and Communications Engineering from Mahatma Gandhi Institute of Technology.
Master's research student in IC design has hands-on experience on Cadence tools like Virtuoso, Genus, Innovus, Calibre. Motivated to learn more in the field of IC design
I'm currently working as an Optics Design Engineer for Biotech applications. My main interests are (Micro/Opto)Electronics, Optics and Photonics, Data Science and Embedded Systems.
Electronic Engineer from the Federal University of Santa Catarina (Brazil). Master in Electrical Engineering from UFSC (thesis title: CMOS Ultra-Low-Voltage Ring Oscillators). Interested in the areas of Sensors, Ultra-Low Power Circuits and MOS modeling.
Currently enrolled as a MS fellow in EE specialization in IC Design.
Currently enrolled as a MS fellow in EE specialization in IC Design. An ambitious research student aiming to gain knowledge and experience expertise in IC designing.
Hey! My name is Beyza and I'm an Electrical & Electronical Engineering student in Turkey. My aim is to bring together the knowledge I've gained about science and technology with other people. The more we learn and the more we develop, the better a mark we leave in the world of science. I'm constantly improving myself for a better future, and I am trying to gain as much information as possible.
I am Anuj Kumar Jha and pursuing MTech at IIIT Bangalore in VLSI
hi, i am jawad. I have done my bachelors in electrical engineering from UET Lahore, Currently, as a research student, i am interested in SoC's. My future goals is to develop expertise in analog, mixed signal and RF circuits designs.
I`m a digital IC designer working for a RISC-V company RIVAI in China, which has close ties with RIOS Lab.
I have been a Professor in The Dept. of Electronics and Communication, College of Engineering, Guindy (CEG), Anna University, Chennai, India and I have retired last year after being on the faculty of this University for twenty eight years. I continue to teach courses as a Guest Faculty in the same Dept. at CEG, Anna University in the areas of Analog, Mixed Signal, RF and Communication Systems and IC Design. I have supervised student teams in building Small Satellites (Avionics subsystems) and also CMOS IC Designs. I have also supervised Masters and Doctoral thesis in the areas of GPS (baseband), uP Clock PLLs and CDRs, RF LNAs, and resonant sensors.
I am a sophomore BSc student. My major is EEE. I am studying at Bangladesh University of Engineering Technology. I want to use my academic skill to contribute to the fundamental field of particle physics.
I am a Senior Undergraduate in Electrical Engineering Department at IIT Gandhinagar, India. VLSI Design and the ability to tweak at the hardware level interest me a lot!
Cryptography and security researcher at Seagate Technology
I am a Graduate student pursuing my master's in Computer Engineering. I am interested in VLSI projects.
M.Tech. in VLSI DESIGN
Student at Universidade Federal de Minas Gerais
Assistant Professor. ECE. University of Pittsburgh. Interests: Neuromorphic and Biomedical Systems Design
Student of Engineering in automation. Graduate in science of Engineering.
I am extremely dedicated individual looking for an opportunity to learn and explore new ways to implement the latest technology. My dream is to join a core company and work on on-site projects. I believe my skills and hunger to learn will turn me into an important asset to the company. Thank you
I am a student in my final year of B.tech in electronics. I am eager to learn about vlsi and its technology. I want to take part in openMPW program
William Oswald received the B.S. degree in computer engineering and the M.S. degree in electrical engineering from the University of South Alabama, in 2020 and 2021, respectively. He is currently pursuing the Ph.D. degree in systems engineering. He has worked in industry as a Systems Analyst at Packaging Corporation of America, from 2019 to 2020. His research interests include computer architecture design, machine learning, and model based systems engineering.
PhD in microelectronics, Professional Skills -Electronics circuit design; both IC and discrete circuit design. -Experienced in circuit design and layout in different CMOS technologies with tape-out experiences from 0.xn--18m-yyc to 40nm.
Just another big dreaming engineer with a desire to learn silicon microfab
I am a senior researcher at Nokia Bell Labs. I am specialized in the design of RFIC and mmWave IC.
Digital System Designer.
Assistant Professor at the Mechanical and Aerospace Engineering Department. The Henry Samueli School of Engineering. University of California, Irvine.
Esmaeil NAJAFIAGHDAM was born in Zonouz, Iran, in 1964. He received the B.E. degree from University of Sistan and Baluchestan, Zahedan, Iran, in 1990, and the M.S. degree from Amir-Kabir University of Technology, Tehran, Iran, in 1994, both in electronic engineering. In 1995, he joined the Department of Electric Engineering at Sahand University of Technology, Tabriz, Iran, as a Lecturer. In 2002, he started his PhD program dealing with a high-performance bandpass Delta Sigma ADC. The research program is directed by Prof. P. Benabes at SUPELEC, France. Esmaeil NAJAFI AGHDAM is now a Professor at Sahand University of Technology. His current research interests include mixed mode electronic circuits, Delta Sigma Converters, RFIC design, Ultrasonic circuits and Electronic measurement.
I am an graduate student of computer system engineering at Usman Institute of Technology. and working on RISCV based SoC designs since 2019 in Microelectronics Research Lab.
I am a Ph.D. student at the Faculty of Engineering Sciences, University College London. My Ph.D. research focuses on the System-on-Chip design of power electronic converters.
An electronics and communication engineering student with a great passion for RF and analog design.
Computer Engineering Student and hardware design enthusiast. Enjoys programming and soldering.
Analog Mixed Signal Design Engineer
I am a student at IIIT Bangalore pursuing Integrated Mtech in Electronica and Communications Engineering and am fascinated about silicon wafers and want to pursue a career and build a revolution in this domain.
Analog design engineer with 3+ years of experience in the analog/ mixed signal design, verification and lab validation.
I am interested in Robotics and Bioengineering. A holistic approach can lead to developing optimal systems. The co-design of cyber-physical systems must take into account the biological and mechanical models, hardware, and software. I search for the application of mathematical representation of models by algebraic geometry, topology, and energy fields. The study of mathematical concepts can lead to hardware and software design that solve complex dynamical systems.
A master's student studying the design of electronic devices
Student at international institute of information technology, Bangalore.
Alejandro Bautista received the M.Sc. and Ph.D. with a specialty in Electronics from INAOE, in 2014 and 2018 respectively. In 2016 he was a visiting scholar in the Electrical Engineering Department of the University of Texas A & M under the supervision of Dr. Jose Silva-Martinez. His research interest includes RF/mixed-mode circuits & systems, wireless communications, low-power.
I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.
I am hager mohamad diff allh, from faculty of engineering-MINIA university (Electrical engineering department).
I am an Electronics Engineer now continuing my MS in electronics from COMSATS Abbottabad in Analogue Chip Design.
IC design Engineer
Assistant Professor in the Department of Electrical and Computer Engineering at The University of Mississippi
I am an Electronics Engineering student interested in IC design.
Professor for electronic circuits at Karlsruhe University of Applied Sciences in Germany since 2020. I received the Dipl.-Ing.(FH) degree from the Karlsruhe University of Applied Sciences, Germany in 2005, and the Ph.D. degree in mechatronics from Johannes Kepler University Linz, Austria, in 2014. From 2005 to 2009, I worked as an IC designer at Bosch GmbH in Reutlingen. From 2009 to 2015, I was a research assistant at Johannes Kepler University Linz. In 2015, I headed the mm-wave wireless research group at IHP Microelectronics. I have authored and coauthored more than 100 journal and conference articles. I received the 2018 VDE ITG-Prize and the 2019 APMC best paper award for his outstanding works on integrated mm-wave radar transceivers in SiGe BiCMOS technologies.
Electrical Engineering student at UFMG, scheduled to graduate in Dec/2022. Experience in the automotive sector by the Formula Tesla UFMG team, designing electrical and electronic systems. Exchange experience in South Africa for 3 months studying English and working voluntarily in needy settlements. Currently, work as Software Engineer at Cadence Design Systems.
Hon-Piu Lam, is a Ph.D. candidate in the Department of Electronic and Computer Engineering of the Hong Kong University of Science and Technology (HKUST). He was an analog IC designer engineer in Valence Semiconductor from 2004 to 2007. From 2007 to 2015, he joined Fujitsu Semiconductor focusing on the embedded NOR flash design. He has been a researcher in HKUST focusing on the integrated power electronic and data converter. His research interests include readout electronics, integrated power electronics and radiation hardened electronics for experimental physics.
Senior Faculty Specialist at University of Maryland
I summarize myself as an extremely committed, utterly honest, very responsible, quite smart and very hard working person at my work while very caring, empathetic, sensitive and sensible person personally. curious by birth , gets very easily bored with routines and set patterns. always in search of making changes, productive changes in and around myself. Believes strongly in getting the basics right in every work/project done or to be done. An unbiased person believing strongly in equality, freedom & sovereignty of one self and of others.
9th semester Electronic Engineering student with knowledge in Simulink, C++, Orcad, LTspice XVII and Verilog. As an electronic engineer in training I have developed a strong interest about the design of analog circuits as well as the operation and manufacture of logic and graphics processors, in the same way I am interested in the use of solar energy and the efficiency in new technologies.
Undergraduate Electrical and Computer engineer at Aristotle University of Thessaloniki, in the Electronics and Computing Field.
A graduating IC design student with lots of passion and interest for electronics design!
MS Electrical Engineering Fellow with a focus on Integrated Circuits and Systems Design. Skilled in Cadence (Virtuoso, Innovus and Genus)
As a 9th semester student of Electronic Engineering at Universidad Industrial de Santander, I have developed a strong interests for design of analog circuits, optimization in the construction of transistors and chips manufacturing as well as the aspects that go into it. I posses knowledge of MATLAB (Simulink and Simscape), ORCAD, LTspice XVII, C++ and Verilog.
I am a PhD student at the Indian Institute of Science Bangalore. I do research in the area of RF and mixed-signal circuit design.
A student of Keio Univ in Japan, interested in analog circuits rather than digital ones.
I am a professor in the department of electrical and computer engineering at University of Cincinnati. My areas of expertise are: CMOS, Beyond-CMOS devices such as RRAM, FeFETs, gated-RRAM, TFTs, novel device design, fabrication, and testing, neuromorphic computing, and hardware security.
Analog & Memory IC design Engineer
I am a fourth year student of electrical- electronics engineering at University of Turkish Aeronautical Association in Turkey. For my senior project, I decided to design a chip thats why I am trying to understan procedure from this website.
I am a senior at California State University, Fullerton, graduating in May 2022. Also, I am very interested in creating and implementing designs for either hardware or software. Primarily, I am interested in working on creating and fabricating devices for any use. I am also willing to develop and extend my current knowledge on all subject matters I have learned during my undergraduate time at CSUF.
I am a Masters fellow student of RFCS2 Lab in IC Designing.
I am a PhD student in Electrical and Computer Engineering at the University of California, Irvine.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
Trying never to sit back and enjoy but to come forward and prove myself
I am en Electronics Engineer currently Pursuing my Masters in IC design from FAST NUCES Islamabad.
I am a PhD student at IISC Bangalore. I work on RF and mixed-signal circuit design.
Post-doctoral research fellow in the discipline of Software and Systems, School of Computer Science and Statistics, Trinity College Dublin, with a keen interest in learning new things, specially related to computer science and engineering. Around 4 years experience of teaching and research and more than 10 years of experience in architecture design, optimization, analysis, implementation and verification of digital and digital signal processing systems on FPGAs and ASICs. Diversifying research career by working on quantization of deep convolution neural networks. Author of three peer reviewed journal publications and five international conference publications.
I am a Graduate Research Assistant at the University of Tennessee Knoxville, pursuing the PhD degree in Mixed-Signal Analog Circuit design.
Adjunct professor in Columbia University.
Undergraduate Electrical and Computer engineer at Aristotle University of Thessaloniki, in the Electronics and Computing Field.
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
Mixed-signal designer
electronic engineering student
MS in IC Design Fellow, RFCS2 lab at FAST-NU Islamabad, Pakistan
Research Scholar at Department of Electrical Engineering, Indian Institute of Technology Ropar, India. Current research area is EMI Immune Amplifiers. Previous works include a Memristive adaptable ramp generator circuit for a on-chip training signal generator for trainable DAC, Modeling and hardware implementation of digital image watermarking algorithms.
Graduate Research Assistant at Washington University in St. Louis
Independent Digital Design and Verification Expert with more than 20+ years of experience and founder of semify. While working for established semiconductor companies like Infineon, Dialog Semiconductor and NXP I was responsible for bringing ideas into working ASICs. I developed USound’s first ASIC from FPGA based prototyping to tapeout with minimal resourcing, demanding timeline and tight area and power consumption constraints. Currently I'm acting as a consultant for easyIC and Cypress / Infineon. In addition I'm is also lecturer at the FH Joanneum Graz and guest lecturer at the Technical University Graz.
Provides mixed-signal CMOS training to academia using open-source tools and also solution for the consumer and automotive industry.
I am collage student that wants to improve himself in that area. https://www.linkedin.com/in/alierennozdemir/
Principal Staff Engineer, ASIC Design and Development, Chief Technologist, JHU/APL Space Exploration Sector, Electronic Systems Engineering group
Iam a Ph.D scholar in my final year and a faculty member at MUET Jamshoro
U.G. Student at IIT Gandhinagar.
A digital design engineer, interested in memory hierarchies and high speed interfaces.
Electronic engineering student. 24 years old. Currently doing a LNA design as thesis.
Still a Bachelor student..Trying to get know more always!!
Hello I'm sultan, and I'm from KLE technological University hubli and I'm very exited to do this course on picorisc.
RISC-V Enthusiast GSoC 2020 @ FOSSi Foundation RA @ CAD Lab, IISc Bengaluru, India EE Senior @ NITK Mangalore, India
Student at Poolesville High School interested in computer science and engineering
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
President and CEO
R&D Engineer
I am a final year Masters student of NIT Rourkela, I am interested in SoC designing using RISCV ISA
I am designed mixed signal ICs for Music, Audio, IoT and sensor applications.
i'm an eletronic engineer there are studing to became an IP desing
An analog mixed-signal circuit designer for low-power precision sensor interfaces. See https://staff.aist.go.jp/ippei.akita/
Lecturer at the Department of Computer Engineering, Kwame Nkrumah University of Science and Technology, KNUST. My primary interest is in analog and mixed-signal design.
Dad. Partner. Scientist. Activist. Maker. — He/His
Just a person trying to build a fully featured RISC-V micro-controller and looking cool :)
IC designer with more than 25 years post Ph.D. experience. Specialising in RF, RFIC, analog and mixed-signal. Wide experience in Architecture, system and circuit design. RF front-end module design for cellular with CMOS PA. Over 40 patents issued.
Hello. I am Liam and Analog enginner in South Korea. I want to participate this great opputinity and share my design to other people.
Ph.D. in electrical engineering, 25 years experience in mixed-signal IC design
Electrical engineer with interests in ASIC design, biomedical imaging, and scientific instrumentation.
An enthusiast of the Open Source World.
I am currently a second year PhD. student working in the field of Electrical Engineering at the University of Virginia. My research interests include Analog/Mixed Signal circuit design, Asynchronous computing hardware design, stochastic computing and Ultra-Wide Band transmission circuits
I'm a PhD student working to make mixed-signal chip design more accessible, drawing inspiration from software development techniques. Prior to starting the PhD program, I spent a number of years working in industry at both the chip- and PCB-level on optical sensors and power systems.
Dr Tapas Kumar Maiti, a former associate professor at Hiroshima University Japan, moved to DA-IICT India where he is a faculty member, since June 2019. He was a visiting faculty to IIEST-Shibpur. He has amazing research experience at McMaster University, Canada and IIT-Kharagpur. He has published more than 100 papers in reputed journals and conferences, and also co-authored a book. He received ICMM Excellent Presentation Award, IAAM Scientist Medal, and University Gold Medal. He is a member of IEEE, and Life Member of IEI. Currently, he is working in the areas of Intelligent Computing Devices, Robotics, and Cybernetics.
Mixed-Signal Integrated Circuits instructor and researcher.
PhD Student, School of Electrical and Computer Engineering, Purdue University, USA. Research interests include Mixed Signal Circuits, High Speed Circuits and Digital System Design
Israa Y. I. AbuShawish received the B. Sc degree in electrical and electronics engineering in 2018/2019 (Hons.). She joined the M.Sc. in electrical and electronics engineering from the University of Sharjah in 2019 and in September 2022 she received the degree. She has been working as a teacher assistant with the Department of Electrical and Computer Engineering, University of Sharjah, UAE since 2019. Currently, she worked as a researcher with the research group: Mixed Analog-Digital Smart Electronic Circuits and Systems (MADSECS) in University of Sharjah, which is one of the specialized Research Groups affiliated to the Research Institute for Sciences and Engineering. Her master’s thesis involves the design of low-frequency amplifiers based on highly linear pseudo-resistor and using programmable Analog Building Blocks, such as CMOS rail-to-rail operational amplifiers and Digital programmable operational transconductance amplifiers. She has published several research papers in international conferences and Journals. Her research interests include mixed analog digital IC design, Bio-medical amplifiers and operational amplifier circuit design. Currently she is pursuing a Doctor of Philosophy in Electrical Engineering, at United Arab Emirates University (UAEU).
I am a final year B.Tech undergrad from India highly passionate about digital system design.
mmwave RFIC / mmwave RF designer
ASIC/FPGA Design Engineer | Former Intern in CERN | Former Cultural Ambassador of Pakistan in USA | Gold Medalist
I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.
Electrical Engineer, pursuing a Masters in Microelectronics
Gentlemen: I have a professional background in the automotive industry, working in production management, IT and logistics where I worked as a technician, supervisor, coordinator and manager, which allowed me the following experiences: 15 years in the automotive industry, managing production and industrial logistics, planning, scheduling and production control in serial and batch production lines. With experience in dimensioning, planning and implantation of a manufacturing unit with productive start and logistics transfer without production losses. 20 years in IT management, in a soft house in the implementation, parameterization and maintenance of ERP Management projects (programming, database and systems analysis), maintenance and specification of electrical equipment, materials and systems. 4 years ago I started working with maintenance of electronics, commercial, industrial equipment , hospital, motors and transformers. Study and implementation of projects in the electrical discipline for overhead and underground networks, electrical infrastructures in residential, commercial, industrial works and maintenance of equipment in the electronics laboratory. Research and development of Brain-Machine Interfaces. As a form of relaxation and leisure, I developed an aptitude for fine arts where I have worked as a draftsman, painter, sculptor and modeler for over 20 years. I have mastery of Project Management methodology, knowledge in several SAP systems, in addition to Advanced Office package
I am a professor of Neuroprosthetics at Newcastle University. My primary interest is in developing implantable medical devices to treat neurological conditions.
Driven by my fascination for innovation and technology, the vast field of science has been my home for a quite a time now. Having my schooling done at Lisieux school and my bachelors going on in PSG College of Technology, I have always firmly believed in education beyond classrooms. And the company I founded, Technowiz, was solely for offering innovative and practical courses to the young minds of schools around here. Technowiz offers advanced wholesome courses in the promising field of robotics, electronics and beyond. I have been also actively involving myself in many projects related to my major - Electronics and Communication Engineering of which Cost Effective IoT enabled automation of Spray Pyrolizer, a project at Thin Film Center of Excellence, PSG College of Technology funded by PSG STEP a notable one. I am deeply interested in working in cutting edge areas of engineering to solve problems with the vision of making the world a better place to live. The future is science. The future is now! Check out: https://shrihari.ga https://technowiz.tk
DR. PETER BERMEL is an associate professor of Electrical and Computer Engineering at Purdue University. He is the PI for the SCALE project, which aims to perform workforce development in microelectronics. His research focuses on improving the performance of photovoltaic, thermophotovoltaic, and microelectronic systems using the principles of nanophotonics. Key enabling techniques for his work include electromagnetic and electronic theory, modeling, simulation, fabrication, and characterization.
Full time: Electronics Engineer with an interest in embedded systems solutions. I can take a project goal and design, develop, prototype, program, validate an embedded system reaching that goal. Part-time: Maker, interested in rapid prototyping, my lab has basic machines: CO2 Laser cutter, 3d printers, small milling machine. I've built 3 of my own 3d printers.
Osaze Shears is passionate about many engineering and computational concepts. These include embedded systems, application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and microprocessor technologies. Osaze spends his free time tutoring other students who are interested in learning to become better computer scientists and engineers to benefit the greater society. Osaze is currently a PhD student at Virginia Tech conducting research under the Multifunctional Integrated Circuits and Systems (MICS) lab. His research interests include: • Spiking Neural Networks • Hardware Acceleration • SoC Design with ASICs and FPGAs • Deep Learning • Edge Computing
Enthusiastic VLSI Design Engineer currently working in Domain Specific Architectures
I am a young student, growing high with a passion for VLSI. I am highly interested in working on high-speed low-power RTL chip design.
RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.
I'm currently a PhD candidate at Stanford studying Electrical Engineering with Prof. Priyanka Raina. I graduated from Princeton with high honors in Electrical Engineering and certificates in Applications of Computing and Engineering Physics. I completed my Stanford M.S. degree in EE; my current PhD research focuses on emerging memory/circuit technologies (resistive RAM/NEM relays) and efficient reconfigurable computing (FPGAs/CGRAs). I consider myself an eclectic learner who has never been satisfied to work in just a single area. In the past, I've done research projects across an extremely wide array of subjects, including oxide nanoelectronics (Prof. Patrick Irvin, Pitt), stochastic simulation of biochemical processes (Prof. Marcus Dittrich, PSC), deep learning applied to petroleum well data (Prof. Verena Kaynig-Fittkau, Harvard/QRI), and development of quantum cascade devices in group-IV materials (Prof. Claire Gmachl, Princeton). My senior thesis at Princeton with Prof. Prateek Mittal was focused on privacy threats posed by Content Delivery Networks. I've also worked as a software intern at two companies, GoFundMe and Amazon; there, I took on data science and analytics problems affecting business. Recently, I completed an (entirely virtual!) internship at NVIDIA focused on improving circuit design with AI. Additionally, I have several personal projects I'm proud of: an analytics engine for online Set! to understand how people learn the card game, enabling Amazon Alexa home assistants to rap battle each other, studying graph techniques for understanding musical collaborations... and so on. I love meeting/hearing ideas from new people, so feel free to contact me. Cheers!
Digital Design Engineer
Hi I'm a MASc Student at University of Toronto. My research focuses are FPGA architecture, DL Acceleration, Heterogenous devices and CAD tools.
Electronics Nerd with a passion for neuromorphic chip design
I am student of electronic background and excited about chip design and mangement.
Professor Alex James received the Ph.D. degree from the Queensland Micro and Nanotechnology Centre, Griffith University, Brisbane, QLD, Australia. He works as a Professor of AI hardware at School of Electronic Systems and Automation, and Dean (Academic) at Digital University Kerala. He works in the broad area of brain-inspired systems, memristive systems, intelligent semiconductor devices, analog circuits and imaging systems. He is Prof-in-charge of Maker Village that supports over 80+ hardware startups. He is Chief Investigator of the centre for Intelligent IoT Sensors, and India Innovation Centre for Graphene, developing new products to the market. Dr. James was the founding chair for IEEE Kerala Section Circuits and Systems Society. He is a member of IEEE CASS Technical committee on Nonlinear Circuits and Systems, IEEE CASS Technical committee on Cellular Nanoscale Networks and Memristor Array Computing, IEEE Consumer Technology Society Technical Committee on Quantum in Consumer Technology (QCT), Technical Committee on Machine learning, Deep learning and AI in CE (MDA) , Member of BCS’ Fellows Technical Advisory Group (F-TAG) and Member of SIG on Electronics for Agrifood.
I am a current Master's student in IC (Integrated Circuit) and Systems Design, as well as a Research Assistant at the Micro Nanoelectronics (MiNE) Lab located at SEECS NUST. I completed my Bachelor's degree in Electronics Engineering from UET Peshawar. As a member of the MiNE Lab team, I am involved in cutting-edge research in the field of micro and nanoelectronics, with a specific focus on the design and development of integrated circuits and systems. My academic and research background has provided me with a strong foundation in electronics engineering, and I am passionate about utilizing my skills to contribute to the development of innovative technologies in this field.
I'm an ASIC Design Engineer with a focus on SoC verification. With over three years of experience in the field, I have had the privilege of successfully completing and taping out three projects. My expertise lies in ensuring the functionality and performance of complex System-on-Chip designs through thorough verification methodologies. Throughout my career, I have gained a deep understanding of the entire design flow, from specification and architectural exploration to RTL coding and verification. I am proficient in industry-standard verification languages and methodologies, such as SystemVerilog and UVM.
Adjunct Professor - Pratt School of Engineering at Duke University
Usman received B. Sc. Electrical Engineering from University of Engineering and Technology, Peshawar, Pakistan, in 2006. He obtained M. Sc. Electronic Engineering from GIK Institute of Engineering Sciences and Technology, Swabi-Topi, Pakistan, in 2008. He completed his Ph. D. in “Sensorial and Learning Systems Engineering” from University of Rome "Tor Vergata", Italy, in May 2014. During doctoral studies, he visited Nanoelectronic Science and Engineering Laboratory (NESEL) of Sungkyunkwan University (SKKU), South Korea, for six months. After completing Ph. D., he pursued post-doc research at initially Tor Vergata (1 year) and then at NESEL (2 years). In December 2017, he became a Research Professor at SKKU which he pursued for one year. In December, 2018, he joined School of Electrical Engineering and Computer Science (SEECS), National University of Sciences and Technology (NUST), Islamabad, Pakistan, as an Assistant Professor. Since February, 2021, he is an Assosiate Professor at SEECS. He has so far published 22 articles in top-tier Journals and had delivered eight conference talks. Since 2015, he has also been a reviewer for Nanoenergy and Sensors MDPI. His research interests include micro-nano systems, nanoelectronics and electronic interfaces for micro systems.
I am studying artificial intelligence as my Bachelors at the Institute of Technology Deggendorf. For my further studies I want to specialise in low level chip control and hardware accelerated devices cut out for edge AI devices.
Researcher at Indian Institute of Technology, Bombay
I'm a Graduate Research and Teaching Assistant at Oregon State University.
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
Hi! I'm a senior student at the National University of Sciences and Technolog (NUST), and majoring in Electrical Engineering. My focus is Digital Design and FPGA fabrics.
I majored in electronic science and technology for my undergraduate degree and integrated circuit engineering for my postgraduate degree. During this period, my research direction was analog integrated circuit design and application.
i am a vlsi enthusiast
Taher Kourany joined Scenario Design Services, Cairo, Egypt as a Senior IC Design Consultant in 2016. He received B.Sc Degree in electronics and communications engineering from Ain-Shams University, Cairo, Egypt, in 2012. He received M.S. degree in electronics from the American University, Cairo, Egypt, in 2015. Until October 2015 he was a Research Assistant with the Center of Nanoelectonics and Devices Research Labs at Zewail City for Science and Technology. Mr. Kourany has published papers in the field of time complexity reduction algorithms of floorplan representations, area and wirelength minimization, Pareto-front multi-objective optimization algorithms of highly chaotic systems. His current research interests include high linearity Power Amplifiers, time complexity reduction algorithms, data structures, parameters estimation of highly chaotic systems, and the synthesis of analog IC design and layout.
Jack of all trades
A human being, professional in microelectronics and telecommunications, passioned about electronics, open source, and music.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
Hi , I am Gajanan Chavan I am a passionate individual with a deep love for computers. My skills encompass C++, HTML, CSS, Bootstrap, Python programming, and data structures. Currently, I am pursuing a degree in Electronics and Telecommunication at SGGSIE&T in Nanded, Maharashtra. My goal is to continuously enhance my knowledge and expertise in the field of computer science and contribute to innovative projects and solutions. I am eager to connect with like-minded professionals and explore opportunities that allow me to apply my skills and contribute to the ever-evolving world of technology.
Analog and Mixed signal IC designer
Berna Örs Yalçın received the Electronics & Communication Engineering degree and the MSc degree in 1995 and 1998, respectively, both from the Istanbul Technical University (ITU), Turkey. She received the Electrical Engineering degree in applied sciences from the Katholieke Universiteit Leuven, Belgium, in 2005. Currently, she is a Professor at ITU. Her main research interests include cryptography, embedded systems, and side-channel attacks.
I am a recent graduate who have done his Bachelors of Science in electrical with specialization in electronics.Currently I am doing my masters in IC designing. Mainly my field of research is in analog design,but overall my interest for IC designing is vast and I am eager to learn all the concepts and tools whether they are related to analog or digital.
I'm wireless research to make prototype to probe new wireless technology
Hi, I am an electronics enthusiast and hobbyist, very interested in SoC and VLSI.
Hello, my name is Usama Ishfaq. I am an electronics engineer with expertise in IC design. With years of experience in the industry, I have developed a strong understanding of the complexities involved in designing and developing integrated circuits. My passion for electronics and technology has driven me to constantly learn and innovate, ensuring that I stay up-to-date with the latest advancements in the field. I take pride in my ability to work collaboratively with teams and clients to deliver high-quality solutions that meet their specific needs. Thank you for taking the time to read my introduction.
Electronic engineering student at the National University of Córdoba
I am a science enthusiast. I have knowledge of analog and digital electronics
A designer, a PhD, Who simply love Circuit design
University researcher
FPGA/HW engineer
I am ASIC digital designer engineer, always keen to explore new alternatives, methodologies, designs. I like challenges and always proactive to help.
I am an undergraduate student majoring in Electronics and Communication Engineering, with a strong passion for Digital Design. I am incredibly enthusiastic about working in this field, as it forms the foundation of every electronic device we use today. Moreover, its development plays a pivotal role in enabling the practical application of Machine Learning algorithms. I possess a diverse skill set that includes proficiency in Machine Learning and Data Analysis, as well as programming skills in C++ and Java. These skills equip me to contribute effectively to the exciting world of Digital Design and its integration with cutting-edge technologies like Machine Learning.
Three decades in SoC architecture and system designing . Motion control, sensor design and electro-optics,
A PhD student working in WEST (Wireless Environmental Sensor Technology) Lab with a focus on Analog IC design.
Power electronics IC designer with in-depth experience in switched-capacitor and hybrid DC-DC converters.
Computer Engineering Student at the University of Notre Dame
I am currently in my junior year studying computer engineering at the University of Notre Dame. Alongside that, I am pursuing a concentration in cybersecurity and a minor in engineering corporate practice. My curiosity was initially drawn to the puzzle-like nature of security problems, which led me to major in Computer Engineering in an effort to dissect both the hardware and software sides of computer systems and expose their vulnerabilities. The more I learned about cybersecurity, the more I realized its criticality in safeguarding individuals and organizations and its ever-growing prominence in our tech-driven world, especially within software development. Software engineering complements that passion but adds a layer of creativity and ingenuity that fuels my drive to develop programs and systems that help serve people all over the world. I strive to build solutions that are not only resource-efficient but also sustainable, scalable, and adaptable. Achieving this goal requires a relentless passion for learning about available and emerging technologies – a skill I am proud to have. I am fascinated by the ever-evolving landscape of tech innovation, and it is this fascination that motivates me to delve deeper into the world of technology, continuously seeking out new knowledge and skills to ensure I stay at the forefront of this dynamic industry. Throughout my undergraduate career, I have taken on various leadership positions, from acting as the Vice President of my university's Engineers Without Borders chapter to leading development teams at CS For Good. I expect to graduate in May 2025, and I am currently interested in an internship position for the summer of 2024.
Experienced in software engineering and offensive cybersecurity, I specialize in wireless networking security, cellular communication security, and cryptanalysis. Proficient in C, C++, and Python, I excel in scripting and automation. Currently delving into embedded system design, focusing on FPGA and ASIC.
I am a student at the University of Notre Dame, studying Computer Engineering, Engineering Corporate Practice, and Accounting. I seek to combine my technical background alongside dynamic person-focused relationship building to create impact at the intersection of engineering and business.
Professor at the University of the Philippines Diliman.
I am a Computer Engineer at the University of Notre Dame, with minors in Innovation and Entrepreneurship and Corporate Engineering Practices. I enjoy working with assembly languages and at the circuit level.
Computer Engineering Student at the University of Notre Dame
Computer Engineer at the University of Notre Dame
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
Senior lecturer at Vasyl Stefanyk Precarpatian National University
I do research in the field of mixed-signal IC design in various areas like biomedical, space research and consumer electronics.
holding a Doctorate in Electronics and Telecommunication Engineering, with a robust background in research and innovation. Throughout my academic and professional journey, I have successfully completed four significant research proposals, contributing to over 60 publications in esteemed journals and conferences within the field. My dedication to advancing technology and fostering innovation led to the granting of a patent, underscoring my commitment to pushing the boundaries of knowledge. Additionally, I have secured copyrights for 10 original works, further cementing my contributions to intellectual property. In addition to my research endeavors, I have also ventured into the realm of academia, having published seven books and serving as the editor of Scrivener Wiley, a prestigious platform in the academic community. These publications not only showcase my expertise but also reflect my passion for sharing knowledge and nurturing the next generation of professionals in the field. With a multidisciplinary approach and a drive for excellence, I am poised to continue making significant strides in electronics and telecommunication engineering, leveraging my expertise to address pressing challenges and drive impactful innovation.
vlsi design Researcher, assistant professor
Senior security researcher, compiler/binary hacker, NFC ninja, hardware hacker with a FPGA hammer. Previously Pay Security.
I am an alumnus of Masters in Electrical Engineering from Department of Electrical Engineering, University of Engineering and Technology, Lahore; the project should be shipped there. The address is: University of Engineering and Technology, Main Campus, G. T. Road, Lahore, Pakistan. Postal code: 39161
Berna Örs received the Electronics & Communication Engineering degree and the MSc degree in 1995 and 1998, respectively, both from the Istanbul Technical University (ITU), Turkey. She received the Electrical Engineering degree in applied sciences from the Katholieke Universiteit Leuven, Belgium, in 2005. Currently, she is a Professor at ITU. Her main research interests include cryptography, embedded systems, and side-channel attacks.
A passionate individual interested in fusion of energy efficient computation and nanoelectronics along with its integration in conventional technologies and deployment to solve pressing challenges
Founder / director of SLICE Semiconductor, specialising in analog IC design contract services and high performance mixed signal ASIC solutions.
I am a professor in computer engineering at the Faculty of Computer and Information Science, University of Ljubljana, Slovenia. My research interests include computer architecture and organization, parallel processing, computer arithmetic, embedded systems, and VLSI design.
Electronics Enthusiast with a passion for ML innovation
I am a computer engineer with 8 years experience in developing and deploying innovative solutions in the following areas: Analog, digital, embedded systems, network infrastructure and Internet of things (IoT) hardware (PCB and firmware programming), Phonotaxic pest control systems, bioelectronics for detection of volatile organic compounds of infectious diseases, Monitoring, evaluation and process control, Artificial intelligence, machine learning, deep learning and computer vision. Robotics and drones If you want to build, design, repair, maintain or integrate any kind of hardware, feel free to DM. I also do product management and development of all kinds of softwares including those you think can’t be done in Nigeria. If you need help for any project you’re working on, including academic projects just contact me and I would to assist to the capacity which my spare time can allow, you don’t have to pay if you are a member here.
analog and power IC designer. multiple commercial projects experiences.
I am a recent graduate with a Major in Electronics and Telecommunication Engineering and a minor in computer engineering.
Electrical Engineering Student at the University of North Texas. Aspiring Digital IC Designer.
PhD in Electrical Engineering
Hellow My self Ali Gul currently pursuing my bacholar degree in Telecommunication Engineering From Quaid-E-Awam University Of Engineering Science & Technology Nawabshah and Hunger of gain some practicle knowlwdge in Circuit Design And Networking
Electronics and Communication Graduate from Vidyavardhaka College of engineering.
RTL Design, GDS, VLSI
I am a final year Computer engineering student at Habib University. I am currently focused on in-depth study of RISCV architecture, and SoC design for Robots.
An undergraduate Electrical Engineering student from Pakistan passionate about chip design, aspiring to dive into Silicon Valley's cutting-edge chip innovation. With a robust foundation in embedded systems and proficiency in C, C++, Python, CSS, and Java, they aim to excel in the tech industry, blending their technical expertise with a flair for creative article writing. As a dedicated IEEE member and certified volunteer administrator, they have a vision to shape the future of technology through innovation and exploration.
I am Taufiq Alif Kurniawan, Assistant Prof. in Department of Electrical Engineering, Universitas Indonesia. My research field is RF/analog IC Design. For full information, please access : http://staff.ui.ac.id/taufiq.alif
为生化环材立心，为机械土木立命，为地海农油继绝学，为集成电路开太平。 | Undergraduate student in Electronic Engineering, CUHK (2018-2022) | Ph.D. student in Electronic Engineering, CUHK (2022-2027) | Hong Kong Ph.D. Fellowship Scheme (HKPFS) Awardee in 2022 | Research Interests: Mixed-signal integrated circuit design for data conversion
Greetings! I, Devang Sharma am a B.Tech final year student studying at Jaypee Institute, Noida. I am a VLSI-enthusiast and posses moderate to advanced-level skillset(at B.Tech level). I have studied about ASIC Design Flow and learnt several HDLs(Verilog, SV, UVM).
Interested in new concepts for RF circuit, wideband digitization, low-power IoT, and medical devices.
I am a Professor at BITS Pilani. I teach courses on VLSI Design, Semiconductor device and process and Analog Design. My area of research includes neuromorphic computing, embedded memories and biosensors.
Pre-Final year at EEE, NITK. Looking to get hands dirty with an immense curiosity and interest in fields (and not limited to) Digital Design, CPU architecture and other fields under computer engineering. Crazy about new market innovations and always looking forward to new connections.
