Hi! It's good to see you being here, good to believe we have same interests. Coffee Design Debug Improve OpenSource
Analog IC Design Engineer with considerable expertise in mid- to high-frequency transistor-level design in the semiconductor industry, including clock synthesis, radio frequency circuitry (RF), and memory circuitry design. Experience also includes testing at board- and wafer-level, test automation, and simulation scripting.
Cybersecurity nut, hardware hobbyist, nature enthusiast, amateur trumpet player. I also play World of Warcraft with my dad on the weekends.
CEO of PineS Corp., Established in 1999, ASIC Design Service & Full Custom Layout Service.
Linkedin - https://www.linkedin.com/in/bhawandeep-singh-1b164517/ PhD student in CSE department in UCSC, advised by Prof. Jose Renau. My areas of majors are CPU design, digital design and embedded software.
I am a software developer, trying to learn about hardware design
An independent and self-motivated fpga engineer with many product and service based project in semiconductor and cryptography market. More than three years of experience in the crypto mining market. Involved in product design/development, management.
10 years exp. ASIC development. MSU professor.
Aspiring analog IC designer
Electronics Engineer student at Benemerita Universidad Autonoma de Puebla
Electronics Engineering Student at Institut Teknologi Sepuluh Nopember
I am an Analog Designer passionate about building and exploring new and novel integrated circuits to create a better world.
I have more than five years’ experience in electronics integrated circuits industry. I have been involved in more than six silicon runs which were all successful and meeting expectations.
I am a experienced analog and mixed-signal circuits designer, using standard and/or custom circuits ( external IPs or from my own design ).
Developer of open source EDA tools on Open Circuit Design
Analog IC design engineer with expertise in designing analog building blocks variable gain amplifiers, active filters, frequency synthesizer (integer-N PLLs), voltage regulators.
I am a teacher at MIT Manipal , currently pursuing my Ph.D in the field of LDO voltage regulator.
VLSI circuit design engineer with significant experience in microprocessor design in semiconductor processes from 65nm to 10nm. Provided register file designs and design training for Intel Big Core and SOC projects. Helped create semi-automated array layout methodology. Established cross-organizational methodology for variation analysis in register files. Converged memory IP handling across multiple organizations.
Engineer, who typically worked in start up environment. So do A-Z, a-z and 1 - infinity if something has to work
I am a full custom analog and mixed-signal IC design consultant. I have been consulting for over 22 years following 12 years as a staff member at MIT Lincoln Laboratory.
I received the B.S. degree in Industrial Electronics Engineering from the Universitat Politècnica de Catalunya, Spain, in 2007, and the M.S. degree in Micro- and Nanoelectronics Engineering in 2009 and the Ph.D. degree in Microelectronics and Electronic Systems in 2015 both from the Universitat Autònoma de Barcelona, Spain. From 2006 to 2008, I was with Investigation Total Ware, S.A., Spain, where I was engaged in analog and mixed-signal circuit design for highly reliable wireless telecommunication systems. From 2008 to 2015, I was with the Integrated Circuits and Systems design group at the Institut de Microelectrònica de Barcelona, CNM, CSIC, Spain, designing low-power high-precision mixed-signal ASICs for integrated smart sensors and IP blocks. From 2015 to 2016, I was with Broadcom Ltd., Barcelona, Spain, developing low-power CMOS IPs like low-temperature-drift oscillators, varible-temperature-coefficient current/voltage generators, temperature sensors, cross-domain level shifting and biasing circuits, touch-sensor transmitter drivers. I am co-author of 12 publications and participant in several research and industrial projects using a wide range of CMOS technology nodes. I am recipient of the 2007 Highest Grade Point Average in the Graduating Class Award, the 2014 Best Paper Award and the 2015 Student Best Paper Award Honorable Mention. My skills include: high-performance continuous-time/switched-capacitor circuits such as low-power high-resolution ADCs/DACs using Class-AB OpAmps; system high-level modeling (SciPy/Sage, Matlab); system electrical-level modeling (Verilog/-A/-AMS); EKV circuit-level modeling; full-custom IC design cycle (gEDA Tools/Cadence Virtuoso: from schematics to layout and verification); development of low-noise and low-distortion test equipment (including microcontrollers and FPGAs) and software (using C++, Tcl, VB, Python); and, experimental IC measures and parameter extraction.
Manager of Universal Avionics System Corporation(UASC) PLD design group. This group is tasked with designing, implementing and approving, in accordance with RTCA/DO-254 guidance, all ASIC/FPGA used in the Universal Avionics product line.
Electrical Engineer M.Sc. Microelectronics
Computer Science Engineer with extensive hardware knowledge.
I am an Analog/mixed signal IC designer. I worked with different technologies like ams035, xh035 and st 130nm.
Analog full custom design experience of Low power VOltage regulators, Bandgap reference, calibration circuits and common mode receiver. worked on SERDES IP (up to 12Gbps) compliant with USB 3.1 and SATA protocols. AS ESD ENgineer for SERDES IP Improved existing ESD network simulation strategy and ESD network for robust ESD performance reliability and automated existing current density flow for ESD for better efficiency. Technology Nodes: 14nm(FINFet), 28nm(FDSOI) 28 nm,40nm,90nm,180nm (Bulk)
I am an EMC Specialist working at Renault and currently looking to fill my free time with interesting projects (Hardware, EMC, Design, Simulation)
We’re supporting a community where more than millions of people learn, share, and work together to build a chip. At VSD, where we always promote “open source,” we’re promoting about a proven method of collaborating to create technology. The freedom to see the design, to learn from it, to ask questions and offer improvements: This is the open source way.
Physical Design Engineer, 5 Years of experience and always fascinate about learning new concepts. Open to understand & take participate in Open Source.
I'm VLSI Design Engineer aspirant and like to work on design challenges in VLSI domain. I like to keep updated of cutting-edge technology in my field of interest.
CEO and co-founder of efabless. Embarked on a long-held dream to empower individuals to bring their innovative ideas to market.
Analog IC designer with knowledge and experience related to topics in analogl full-custom IC design such as current mirrors, single and differential amplifiers, bandgaps circuits and charge pump.
I've done hardware and software across the years, and I have a design for a chip that I've been itching to build since the 1980s, this looks like my chance.
I am a Application Engineer working for Cadence Design Systems and I facilitate the use of the Palladium Emulator at different Customers.
senior student-ECE departmant-faculty of engineering-ASU.
Experienced Mixed Signal Design Engineer with a demonstrated history of working in the semiconductors industry. Skilled in Data Conversion, Analog Circuit Design, CMOS and Mixed Signal. Strong engineering professional with a Master's degree focused in Electronics Engineering from Ain Shams University.
FPGA expert, interested by opensource tools for FPGA and for ASIC
Longtime innovator in analog and mixed signal design. US Patents US2773120A and US2560234A.
Electronics Engineer, passionate about science with strong technical and interpersonal skills for working in a team and successfully completing a project.
I am Ashwini ,done Masters in Electronics. Very much interested to learn VLSI Physical Design
Electrical engineer, who likes to figure out new stuff
I am a Master Degree holder in VLSI Design. I am interested in Analog Circuit Design.
Electrical engineer with over 7 years of experience in the semiconductor industry. Working experience in Analog IC Design, Silicon/FPGA Lab bring-up and testing, FPGA Prototyping/Emulation & ASIC/SoC Design,
I'm hardworking, I'm smart at doing things, I'm analytical, and passionate to my work. I love to do programming.
I am Electronic Engineer from Chile, I like DSP and radioastronomy applications an ordinary guy
I am an Analog IC Designer by profession. I have loved and done circuit design from my high school days in India. I love developing new challenging circuits and seeing them work in real applications.
My current work is as an analog mixed signal circuit designer for a government R&D institute, I am also involved in characterization and testing after the chip returns from foundry.
Learner for life
35 years mixed signal SoC, ASIC, and FPGA design and management experience. Concertal provides rapid functional IP integration using proprietary System Design Automation technology that includes delivery of RTOS capable fabric that supports loosely coupled HW operation including IP NbC (Network beyond the Chip). IP areas of expertise include common interfaces, data converters, modulators, digital filters, DSP, processors, FSM, and other custom specified functionality.
I am researcher with goals of developing high end technologies for the future.
Semiconductor professional with 40 years experience. I act as a technical consultant, design consultant, or architect for SoCs, embedded systems etc.
Graduated with a Micro-electronics Master from Bordeaux university, France, I have now 18 years of experience. Worked in France, England, Belgium and Brazil, within 5 companies. Implemented physical design flows, recruited, trained and supervised trainees to experienced engineers, I have a vast experience in setting up complete flow (2 companies were startups), as well as signing off important design within NXP and CSR, all to successful first time right silicons. Able to work in total independence as well as within a team, I consider myself as optimist, result focused, with attention to detail while keeping a good trade between time to market and risk taking.
I'm a PCB designer, wanting to learn new technologies like FPGA and ASIC. Designing my own chip is my dream.
Physical Design Engineer
Analog circuit designer with passion in taking challenges .Interest in ADC,DAC,PLL,SDADC,LDO.Done layout of all these blocks.
Mixed background in computer science, applied mathematics and electrical engineering. Expert in algorithms to custom core development, system architecture, integration and functional verification.
Electronics Engineer with 10 years experience in microelectronics and research. Familiar with CMOS integrated circuits design, wireless communication systems, programming and lab environment, I am comfortable working for worldwide semiconductors firms. Passionate for high-tech and music, advocate for teamwork and collective intelligence to support a strong problem-solving methodology, I am curious, self-motivated, addicted to learning and re-shaping the new technologies I am exposed to. During my workday I aspire to address "real-life problems", hopefully continuing to develop my multi-disciplinary skills as a means for technical and personal enrichment.
Hugo Hernández received his B.S. degree in Electronic Engineering from The Industrial University of Santander, Colombia in 2005 and M.S. degree in Electrical Engineering from Polytechnic School of the University of São Paulo (EPUSP), Brazil in 2008. Hugo obtained his Ph.D degree in Electrical Engineering from University of São Paulo in 2015. He was Mixed Signal IC designer at LSITEC and DFCHIP (Brazil) where worked for 8 years, and Pos-doc of the Universidad de Sao Paulo in collaboration with ALICE-CERN as analog IC designer in the SAMPA ASIC project. He was Adjunct Professor of the Control and Automation course at the Engineering Institute (CUVG) of UFMT for 2 years. He is currently Adjunct Professor of the Department of Electrical Engineering of the Federal University of Minas Gerais (UFMG).
"Lifer" IC designer focused on analog and power management for applications you don't want to know about
I am Assistant Professor in Bio-Electronics. My research interests include analog mixed-signal ICs for medical applications, RFIC, and ultra-low power circuits.
Professor in Electronics Engineering with a PhD. in VLSI (Universidad Nacional de Mar del Plata). Expertise in digital RTL and physical design. Experience in FPGA RTL and HLS design for heterogeneous computing. Knowledge in sub-threshold analog design. Fiction writer (National Literature Award for Novel, 2011, Costa Rica)
A young and ambitious individual, eager to apply my knowledge of Computer Architecture and VLSI Physical Design to develop hardware that is performance, power and area efficient, while actively contributing to the development and growth of the open-source semi-conductor industry
Mad Scientist
Passionate about engineering and electronics. Love teaching and mentoring. Highly experience in analogue and RF electronics and enjoy managing projects.
Physical Design Engineer
A recent graduate student from Syracuse University major in Electrical Engineering with focus in VLSI Designs
I'm an engineer with experience in analog IC design both in private companies as well as academia. Experienced in design of delay locked loop(DLL), clock recovery, field detectors, voltage limiters, operational amplifiers, current mirrors, bandgap reference and so on.
I am a senior Electronics and Communications Engineering student at the Faculty of Engineering, Ain Shams University, Cairo, Egypt. I have wide knowledge and some experience in analog electronics with huge passion towards it
Experienced leader of industry and academia focusing on developing customized hardware accelerators for low power mobile, AI and IoT devices. Over 20-years hands-on experience in all aspects of SOC and processor design. Specialties: memory design (SRAM, regfile, CAM), VLSI design for best Power, Performance, and Area (PPA) design point. Power management and power conversion including dc/dc and ac/dc. Computer Architecture and Hardware accelerator using In-Memory-Computing and Emerging Technologies (RRAM)
30+ years of experience ranging across telecom, embedded systems, semiconductor, firmware development.
ASIC Developer at Ericsson, trying hands with the open source tool flow.
I am an electronics engineer currently working as an intern in STMicroelectronics.
I am currently an Associate Professor in the Electrical and Computer Engineering Department at North Carolina Agricultural and Technical State University (NC A&T). As director of the Automated Design for Emerging Process Technologies (ADEPT) laboratory at NC A&T, I research the following questions: (1) how can we make computers more reliable in harsh environments (i.e., ionizing particles, malicious fault injection) and (2) how can we extend Moore’s law (e.g., 3D IC)? To answer these questions, he interrogates the traditional abstraction layers of integrated circuit design (i.e., functional description, circuit design, physical design) to discover design methodologies that are more relevant to these goals.
I am enthuastic engineer who has been doing software engineering (Linux kernel), electronics, and now chip designs. My day job is leading teams (senior director) focusing on virtualization and security.
I work as an Assistant Professor (Grade I) in the department of ECE in IIITDM Kurnool, India. My research work includes VLSI for Signal Processing and Information Security.
Motivated master' Student with progressive experience in ASIC Design and a real passion for it. An energetic - self-starter and team builder. Navigates high-stress situations and achieves goals on time and under budget. Always believing in learning and solving the problem through Technology.
Edward Joullian Endowed Chair in Engineering Oklahoma State University Department of Electrical and Computer Engineering VLSI Computer Architecture Research Group
I'm a physics major studying at UC Berkeley interested in accelerating research and computational workloads with modern VLSI and FPGA tech.
Adjunct professor at Federal University of Itajuba in Itabira, Brazil. Experience in the design of Analog and RF integrated circuits.
I'm an experienced analog mixed signal layout design engineer. Have experience integrating IPs, Full chip layout design. I have hands on experience in TSMC 40LP, 28nm, 16ff, 7nm, GF 130nm process nodes.
Aspiring IC Design Engineer
Assistant Professor (IISc) | Ph.D. & S.M. (MIT) | B.Tech. (IIT-KGP)
A student of Electrical Engineering excited about ASIC design. My interests include Co-Processors and Computer Architecture.
PhD Student Research on Integrated Sensor Interfacing Systems featuring signal conditioning and A/D conversion. Functional blocks developed: VGA, current-steering DAC, SAR ADC, AA Filters, SPI master/slave.
I am a Master's student who has to know for learning and do experiments as well as for writing technical blogger. My website links are given below to connect with my open-source family of the VLSI champions. https://nishitnathwani.blogspot.com/ https://geniusvlsi.blogspot.com/
I am a PhD student at Universiti Kebagsaan Malaysia. My research interests include application-specific hardware design, mainly to accelerate machine learning applications.
I just finished electrical and electronics engineering. I want to develop myself in the semiconductor field
Electrical engineer with PhD in micro-electronics, and more than 23 years experience in the automotive industry. Specialized in the development of CAD tools to support mixed-signal and smart-power IC design. Founder of SYDELITY b.v. a start-up company offering services and products accellerating system-level simulations.
Researcher and Professor at the National University of Córdoba, Argentina. Actual Research areas: microelectronics, embedded systems, Digital Signal Processing
current Phd Student in UCSC Hardware System Collective group formerly worked in Qualcomm Wireless R&D team as a design verification engineer
POEM Technology is a vertically integrated IoT company that develops cellular-connected sensor systems.
Analog/Mixed signal designer.
student
I am a college student and going to do Masters in VLSI
I'm a college student, want to do some project work
A researcher and VLSI guy
Kashif Inayat currently working as a doctorate fellow researcher at System-on-Chips (SoC) Laboratory, Electronics Engineering Department of Incheon National University, South Korea. He considers himself fortunate to have the opportunity to work under Prof. Jaeyong Chung at Incheon National University. Prior to starting his Ph.D., he completed his Master of Science in Electronics and Computer Engineering (ECE) from graduate school, Hongik University in 2019 under the supervision of Prof. Seong Oun Hwang. Moreover, during MS studies he worked at Information Security and Machine Learning Lab, Hongik University, South Korea as a graduate researcher for 2.5 years. Furthermore, he chaired the special sessions at International Conference on Green and Human Information Technology (ICGHIT 2019), held in Kuala Lumpur, Malaysia (Jan, 16-18, 2019). Moreover, he is a registered member of the Pakistan Engineering Council and a reviewer for the IEEE Access Journal.
I am VLSI Trainee wanted to design chips
I am student and wanted to improve my knowledge in VLSI
I am a learner with a enthusiasm towards new concepts.
Passionate student of electronics and computer engineering
Electrical Engineering PhD student at Northwestern studying Spintronics and Probabilistic Computing.
I AM COLLEGE STUDENT AND I WANT TO DO CERTAIN PROJECTS ON IT
Undergraduate student At Indian Institute of Technology Goa Interested in analog electronics, digital electronics, circuit design
Undergraduate in ECE & Economics at BITS Pilani, India. An enthusiast in IC Design, VLSI and Physical Design.
Doctoral student at the Tokyo Institute of Technology.
Planning to enter a master's degree program in 2023. Currently employed in consumer product manufacturing. Personal project experience in embedded systems, digital verification, and RTL for FPGAs.
My name is Andrew Jones and I recently graduated from Erie Community college with a certificate in the mechatronics field.
Md. Sajjad Hossain is currently doing his PhD in University of South Alabama and working as a graduate research assistant in IMPACT Lab. He received his B.Sc in Electronics & Telecommunication Engineering from Rajshahi University of Engineering & Technology (RUET), in December 2016. He completed his M.Eng. IT Convergence Engineering in 2021.02. He was a Graduate research assistant with the Networked systems Lab. (NSL), of the School of Electronics Engineering, Kumoh National Institute of Technology, Gumi, South Korea from 2019-2021. His research area includes VLSI, Machine Learning, Edge/Fog Computing and the industrial IoT (IIoT).
Experienced PCB/Package Layout Engineer with an extensive experience in EDA automation using SKILL python powerscript
I'm a third-year student at Bits-Pilani (ECE). I am greatly interested and highly motivated towards pursuing a career in digital and analog circuits.
I am an electronics engineer from Montenegro, specializing in integrated electronics design and simulation. My greatest interest is in the field of analog ICs, especially applications in the medical field. Other interests are mathematics(dynamical systems foremost), physics simulations using numerical methods and so on. I also like to spend my spare time making a game engine in C++
Highly-motivated Engineer looking to gaining new challenge in Analog IC design and RF/ mm-wave IC Design. Organized, hardworking, and energetic. Wishing to leverage my passion for technology and design.
PhD student working on a superconducting FPGA design aiming to work on neuromorphic computing in the future.
I am a 3rd year electronics engineering student. I am interested in chip design and want to learn this field. www.linkedin.com/in/ferhat-böcek-b73452170
Working as Professor in an Engineering College, I teach VLSI related subjects like HDL, CMOS design, Verification and Testing
working as Assistant Professor in Sree Vidyanikethan engineering college, Tirupati.
Current iOS Programmer, EE with decade of physical design experience in mixed signal - worked on POWER architecture PLLS.
open source autopilot guy
Beginner Digital Designer
Undergrad at Harvey Mudd College interested in Computer Science, Computer Engineering, Electrical Engineering and Filmmaking. GitHub: http://github.com/kavidey Youtube: http://youtube.com/@kavidey
I'm a double-degree PhD candidate at University of São Paulo and Communauté Université Grenoble-Alpes with experience in analog/RF design and layouting at integrated technologies and interposers, with experience in slow-wave devices.
Actively Looking to work in a Semiconductor Organisation.I'm undergoing Masters in VLSI. I am Passionate about VLSI and semiconductors.He recently completed the 6-months training in Back-end VLSI at Entuple Technologies. And in addition to that specifically trained in STA, Synthesis and Physical Design by employing Cadence Tools. He is interested in and currently working on Open-Source tools related to VLSI (Openlane)
I would like to think I am a safety-focused, results-driven, and professional Electronics & Communication Engineer and M Tech in Electronics & Communication Engineering with specialization in VLSI Design, who can be relied upon to carry out my tasks competently within strict rules and procedures in a fast and efficient manner.
Professor for microelectronics
i am a tech enthusiastic i love exploring new circuits by designing them want to learn about this
ECE Undergraduate Student @ Guru Gobind Singh Indraprastha University
Pham Van Khoa received the B.S. degree in Computer Technology and PhD. degree in Electronic Engineering from the University of Technology and Education, Vietnam and Kookmin University, Korea, respectively. In 2010, he joined ICDREC (Integrated Circuit Design Research and Education Center), where he was engaged in the development of VN8-01 MCU, the first commercial micro-controller fully designed and fabricated by Vietnamese. In 2011, he joined University of Technology and Education HCMC, where he is currently a senior lecturer at Department of Computer and Communication Engineering. His research interests include Low-power VLSI solutions for Memory, Energy Harvesting, Memristor-based Neuromorphic Computing Systems, Neural Network Accelerators and MP-System-on-Chip based designs.
My area of interest is Analog and Mixed signal circuit design. I teach Electronic Circuit, VLSI design and Signals & Systems for under graduate students and Analog Integrated Circuit Design, Data Converters and Clock & power management circuit courses for Masters students. I also teach VLSI lab courses for both both undergraduate and masters students. Every year I supervise both undergraduate and masters students in analog circuit design projects. Presently I am involved in SRC project as Co-task leader in Analog and Mixed Signal circuit verification project using Machine learning techniques.
I work with embedded systems, analog electronics and general physics research. I founded a small engineering services company in Brazil, currently working with a team of 3 engineers to create products and help companies on their way to to production.
为生化环材立心，为机械土木立命，为地海农油继绝学，为集成电路开太平。 | Current undergraduate student in Electronic Engineering, CUHK (2018-2022) | Prospective Ph.D. student in Electronic Engineering, CUHK (2022-2026) | Research Interests: Mixed-signal integrated circuit design for data conversion
Analog VLSI Design Enthusiast
High Performance, High Frequency Analog, Microwave, RF and Optical Chip and Package Test Software and Hardware, Multi-Chip System Integration and Reliability
Passionate about Digital VLSI and Hardware Accelerators. Experienced in using open-sourced tools for design and verification
Experienced Senior Design Engineer with a demonstrated history of working in the electrical and electronic manufacturing industry. Skilled in DAC, SPICE, ADCs, Electronics Hardware Design, and Management. Strong engineering professional with a M-Tech focused in VLSI System Designs from Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering &Technology and also a B-Tech Degree in the field of Electrical, Electronics and Communications Engineering from Mahatma Gandhi Institute of Technology.
I'm currently working as an Optics Design Engineer for Biotech applications. My main interests are (Micro/Opto)Electronics, Optics and Photonics, Data Science and Embedded Systems.
I have done my undergraduate in Electronic Engineering. Right now I am doing MS in Electrical Engineering(Specialized in IC Design) from NUCES FAST, Islamabad.
Im designated as a lab engineer at Fast NU Isl. My area of expertise is analog and Rf ic design.
I'm a VLSI System Design (VSD) intern, looking for opportunities for tape-out.
Hey! My name is Beyza and I'm an Electrical & Electronical Engineering student in Turkey. My aim is to bring together the knowledge I've gained about science and technology with other people. The more we learn and the more we develop, the better a mark we leave in the world of science. I'm constantly improving myself for a better future, and I am trying to gain as much information as possible.
hi, i am jawad. I have done my bachelors in electrical engineering from UET Lahore, Currently, as a research student, i am interested in SoC's. My future goals is to develop expertise in analog, mixed signal and RF circuits designs.
I have done undergraduate in Electronics Engineering and doing MS in IC design from NUCES-Fast Islamabad.
my name is belete fiseha Iam from Ethiopia my education level is BA degree and currently online learning scholar ship MBA at uopeople
I have been a Professor in The Dept. of Electronics and Communication, College of Engineering, Guindy (CEG), Anna University, Chennai, India and I have retired last year after being on the faculty of this University for twenty eight years. I continue to teach courses as a Guest Faculty in the same Dept. at CEG, Anna University in the areas of Analog, Mixed Signal, RF and Communication Systems and IC Design. I have supervised student teams in building Small Satellites (Avionics subsystems) and also CMOS IC Designs. I have also supervised Masters and Doctoral thesis in the areas of GPS (baseband), uP Clock PLLs and CDRs, RF LNAs, and resonant sensors.
Earth ICT, SPC Founder & CEO
I am a sophomore BSc student. My major is EEE. I am studying at Bangladesh University of Engineering Technology. I want to use my academic skill to contribute to the fundamental field of particle physics.
Cryptography and security researcher at Seagate Technology
Final year electronics engineering student interested in exploring VLSI
VLSI Professional with 2.3 years of experience and adequate knowledge in RTL Design, UPF, SDC, Lint, CDC, Synthesis, Physical Design, STA and Scripting. I love Computers and I am interested in RISC V
RF/Analog IC design and SOC
I am a visual artist . Iam working on digitizing my art and seeking different platforms to accept jobs as a graphic designer.
interested in rapid development environment concept of Caravel
Assistant Professor. ECE. University of Pittsburgh. Interests: Neuromorphic and Biomedical Systems Design
Fresher interested in asic physical design and looking for job opportunities in physical design engineering
Student of Engineering in automation. Graduate in science of Engineering.
Open-source software developer with 30 years experience in back-end verification.
Currently a student in EE, interested in ASIC design and logic synthesis
I am extremely dedicated individual looking for an opportunity to learn and explore new ways to implement the latest technology. My dream is to join a core company and work on on-site projects. I believe my skills and hunger to learn will turn me into an important asset to the company. Thank you
I'm a Hardworking Engineering Graduate Specialized In Electronics and Communication Engineering With more Skills in VLSI Physical Design.
I am college student and I want to do some project work.
Microelectronics enthusiastic. Testing engineer at Mirgor Argentina SA and Researcher at National University of Technology Regional Buenos Aires.
I am a senior researcher at Nokia Bell Labs. I am specialized in the design of RFIC and mmWave IC.
Received B.S. degree from Electrical and Electronics Engineering in Middle East Technical University, Turkey, in 2019. Currently, pursuing M.S. degree from Electronics Engineering in Bogazici University, Turkey. Research interests are computer architecture, hardware security and secure memory architecture
I am an entrepreneur by mind. KINCHIT Technologies, aims to develop circular digital technology solutions and services for Industries, governments and global companies that help to solve the root cause problems. Our current economic system is not holistic but devastating and fragile. Resource intensity and population growths of countries are increasingly becoming burden. Therefore there is a need for fundamental and systemic change order, moving away from the current ‘linear’ system to a more pragmatic ‘circular’ model - regenerative and resilient.
Analog IC design engineer with background in sensor Front-End design and semiconductor radiation detectors.
Assistant Professor at the Mechanical and Aerospace Engineering Department. The Henry Samueli School of Engineering. University of California, Irvine.
Founder and CEO of Earth ICT, SPC NAICS 334413; Semiconductor and Related Device Manufacturing Incorporation Date: 08/03/2021 Corporation ID: C4773876 1-650-996-7232 art@earthictspc.com Biography: Dauntless Entrepreneurial Risk-taker; Invited expert, ITU-T ICT Sector L.TIME (The IC Metric for Energy-efficiency, Quality-Factor) Recommendation. “Art is many faceted; he creates outside the box; he is a serial entrepreneur-intrapreneur and change agent, and is flexible-adaptable-situational. He has worked for Silicon Valley icons such as SRI, Applicon, Computer Sciences Corporation, Informatics, Atari R&D, Interactive Research Corp., Samsung Information Systems America. And he has participated in several startups: Digital Video Inc. (1985–2001), Ravisent Technologies (1998–1999)” [source: ”Sustainable computing - ACM ]
I started out as a part of design team at Hitachi Ltd. which designed 68450 a DMA controller for 68000 under the supervision of Motorola Semiconductors now NXP. Sega bought 68000 for Mega Drive. This led to the sale of SH-2 for Sega Saturn and SH-4 chipset for Sega Dreamcast. I was hoping Dreamcast to use Voodoo chip but this did not materialize. Around 2001 I quitted Hitachi. I started to work for its sales company in silicon valley. There I strated Java Card (tm) project. This led to a series of root of trust projects in Silicon Valley in routers, mobile phones and security tokens in year 2000s. In 2010s I started my current business.
Creation, Paasion, Action are my three main characteristics. I am a Project Manager with Communication Engineering backgound in ICT field. Focus on the topic of IC design, OS design, Cloud computing and Quantum computing.
Analog and rfic design professional working since 1997 , Mainly products on wireless ic design, development and testing. mobile, bluetooth, wlan, uwb, rfid , zigbee chips. blocks receiver, transmitter, pll, ldo, mixer, lna, pa, switch , pmic,
I am the founder of Aurifex Labs LLC. I have a degree in EE and have a strong interest in computer architecture, but have been a software developer/entrepreneur professionally. I also have a little audio DSP background. I created Prospero.Live, a collaborative software development platform.
I am the founder of Aurifex Labs LLC. I have a BSEE from Wilkes University. I've spent most of my time in software, education, and entrepreneurship, but have spent the past year learning VLSI and am excited for this new era of open source hardware/tools.
Esmaeil NAJAFIAGHDAM was born in Zonouz, Iran, in 1964. He received the B.E. degree from University of Sistan and Baluchestan, Zahedan, Iran, in 1990, and the M.S. degree from Amir-Kabir University of Technology, Tehran, Iran, in 1994, both in electronic engineering. In 1995, he joined the Department of Electric Engineering at Sahand University of Technology, Tabriz, Iran, as a Lecturer. In 2002, he started his PhD program dealing with a high-performance bandpass Delta Sigma ADC. The research program is directed by Prof. P. Benabes at SUPELEC, France. Esmaeil NAJAFI AGHDAM is now a Professor at Sahand University of Technology. His current research interests include mixed mode electronic circuits, Delta Sigma Converters, RFIC design, Ultrasonic circuits and Electronic measurement.
Senior software engineer in Tron Future Tech. My work is related to CPU/FPGA heterogeneous computing for radar signal processing. Capable of designing RTL IP, implementing Linux kernel driver and system software programming.
I am an graduate student of computer system engineering at Usman Institute of Technology. and working on RISCV based SoC designs since 2019 in Microelectronics Research Lab.
I am a Ph.D. student at the Faculty of Engineering Sciences, University College London. My Ph.D. research focuses on the System-on-Chip design of power electronic converters.
I waiting for my Blå (E.A.) & untill this no ©omment
I am a student pursuing MS(R) in Integrated circuits in Electrical Department IIT Delhi.
An electronics and communication engineering student with a great passion for RF and analog design.
Computer Engineering Student and hardware design enthusiast. Enjoys programming and soldering.
I am a student at IIIT Bangalore pursuing Integrated Mtech in Electronica and Communications Engineering and am fascinated about silicon wafers and want to pursue a career and build a revolution in this domain.
I am interested in Robotics and Bioengineering. A holistic approach can lead to developing optimal systems. The co-design of cyber-physical systems must take into account the biological and mechanical models, hardware, and software. I search for the application of mathematical representation of models by algebraic geometry, topology, and energy fields. The study of mathematical concepts can lead to hardware and software design that solve complex dynamical systems.
Electronics Engineer. Design Embedded Systems , Firmware professionally and fiddle with others :)
A master's student studying the design of electronic devices
Professional Software Developer and Electronics Hobbyist
I am a PhD. Telecommunication Engineer with 25 years of working experience in the industry. I started my career in 1997 as an IC Design Engineer, then I moved to other technical and management roles in the semiconductor and aerospace industries. Since 2017 I am also teaching IC Design at University for MsC. graduate students.
fresh. grad electronics and communication engineering minia university advanced analog CMOS circuit design
Semi retired adjunct professor 45 years of IC design experience in mixed signal with over 100 patents. Presently entrepreneur working on PhD at ASU Have facilities and equipment to design and characterize chips at home lab and at 2 universities.
Kamala J. received her B.E. degree in Electronics and Communication Engineering from Madurai Kamaraj University in 1989, M.E. degree in VLSI Design from Bharathidasan University, in 2002 and Ph.D from Anna University, Chennai, Tamil Nadu, India in 2011. She is currently working as Associate Professor in the Department of Electronics and Communication Engineering, Anna University, Chennai, India.
Final year student of Electrical Engineering at UET Lahore. Area of expertise is Digital Design, Computer Architecture and SOCs.
IC design Engineer
Professor for electronic circuits at Karlsruhe University of Applied Sciences in Germany since 2020. I received the Dipl.-Ing.(FH) degree from the Karlsruhe University of Applied Sciences, Germany in 2005, and the Ph.D. degree in mechatronics from Johannes Kepler University Linz, Austria, in 2014. From 2005 to 2009, I worked as an IC designer at Bosch GmbH in Reutlingen. From 2009 to 2015, I was a research assistant at Johannes Kepler University Linz. In 2015, I headed the mm-wave wireless research group at IHP Microelectronics. I have authored and coauthored more than 100 journal and conference articles. I received the 2018 VDE ITG-Prize and the 2019 APMC best paper award for his outstanding works on integrated mm-wave radar transceivers in SiGe BiCMOS technologies.
I have an expert in the PCB design area. I am interested for analog design and chip design
Interested in Analog IC Design
Engineering enthusiast
I am a student at Anna University, Chennai, India. I am interested in Neuromorphics.
I am a student who is currently taking a deep dive into the world of ASICs.
I am student.I interested in semiconductor fabrication technics
I am a synthetic biologist and software engineer interested in chip design.
Professor of physics at the University of Texas at Arlington
9th semester Electronic Engineering student with knowledge in Simulink, C++, Orcad, LTspice XVII and Verilog. As an electronic engineer in training I have developed a strong interest about the design of analog circuits as well as the operation and manufacture of logic and graphics processors, in the same way I am interested in the use of solar energy and the efficiency in new technologies.
IC Designer
MS Electrical Engineering Fellow with a focus on Integrated Circuits and Systems Design. Skilled in Cadence (Virtuoso, Innovus and Genus)
As a 9th semester student of Electronic Engineering at Universidad Industrial de Santander, I have developed a strong interests for design of analog circuits, optimization in the construction of transistors and chips manufacturing as well as the aspects that go into it. I posses knowledge of MATLAB (Simulink and Simscape), ORCAD, LTspice XVII, C++ and Verilog.
Graduate student passionate about integrated circuit design for biomedical applications
I am a professor in the department of electrical and computer engineering at University of Cincinnati. My areas of expertise are: CMOS, Beyond-CMOS devices such as RRAM, FeFETs, gated-RRAM, TFTs, novel device design, fabrication, and testing, neuromorphic computing, and hardware security.
Retired IT professional. Using time in my retirement to reconnect to my playful self by undertaking a mix of hardware and software 'sandbox' projects.
Mixed Signal circuit designer with over 40 years experience.
I am a Professor at the University of New Mexico, and participate in two startups, Enthentica and IC-Safety, LLC to build PUF technology
I am a Masters fellow student of RFCS2 Lab in IC Designing.
I am a avid analog-RF mixed signal designer. Currently I am experimenting with novel design techniques using open-source tools.
I am a PhD student in Electrical and Computer Engineering at the University of California, Irvine.
An electrical engineering student studying from FAST-NUCES with a vested interest in IC design.
Automation enthusiast (likes to code in Perl). At this time, Doing Master's in VLSI Design and working as an intern @intel. Great learning experience doing both simultaneously. Have experience designing in both circuit (Low power & timing) & device level (high performance designs for digital applications). Obtained honor of 3rd position in concept design competition by ISRO for designing temperature & radiation resistant Tunnel FET. Would love to work with all device technology enthusiasts as opportunities arise.
Graduate Student and Research Assistant at the MM-Wave, THZ and Photonics Lab (MTP), Arizona State University
Post-doctoral research fellow in the discipline of Software and Systems, School of Computer Science and Statistics, Trinity College Dublin, with a keen interest in learning new things, specially related to computer science and engineering. Around 4 years experience of teaching and research and more than 10 years of experience in architecture design, optimization, analysis, implementation and verification of digital and digital signal processing systems on FPGAs and ASICs. Diversifying research career by working on quantization of deep convolution neural networks. Author of three peer reviewed journal publications and five international conference publications.
I am Dr. Naushad Alam working as an Associate Professor in the Department of Electronics Engineering, Z H College of Engineering & Technology, Aligarh Muslim University, Aligarh, India. I received B. Tech. degree in Electronics & Communication Engineering from Jamia Millia Islamia, New Delhi in 2003, and M. Tech. Degree in Electronic Circuits & Systems Design from Aligarh Muslim University, Aligarh in 2009. I earned Ph.D. degree in Microelectronics from Indian Institute of Technology Roorkee, India in 2013. My doctoral work was on nanoscale circuit design considering the impact of process-induced mechanical stress. He has published 29 papers in SCI indexed journals that include 10 IEEE Transactions and 33 papers in reputed conferences. I have supervised two PhD thesis in the area of device-circuit co-design and presently supervising two more PhD students. I have also successfully executed a UGC funded research project on TFET based SRAM cell design for IoT Applications. My research interests include device-circuit co-design, robust nanoscale circuit design, low power circuit design, PVT tolerant circuit design, Near-Threshold/Sub-Threshold circuit design etc.
I have done electronic engineering from University of Engineering and Technology Peshawar in 2021, currently, i am doing MS in Electrical Engineering (Specialization in IC Design) from National University of Computer and Emerging Science(FAST-NUCES).
Zhiyang Ong is a globetrotting, venturesome cultural chameleon tackling challenges related to U.N. Sustainable Development Goals, using a skill set that spans electrical engineering and computer science. He is a Ph.D. student at Texas A&M University's electrical & computer engineering department. He is currently working on noise-based logic and embedded deep learning, and had worked on problems in electronic design automation, VLSI formal verification, satisfiability modulo theories, network science (or complex systems), evolutionary computation, network optimization, and multi-objective optimization. He has also designed multiple VLSI circuits and systems, from SRAMs and processors to a Viterbi decoder and a tree adder. In his free time, he was recently working on solving the Quadratic Travelling Salesman Problem (QTSP) with his research collaborators, using an adiabatic quantum computer from D-Wave Systems.
I'm a senior in high school interested in computer science.
I have been working as a Full Professor in Electronics Engineering Department, AMU, Aligarh.
MS in IC Design Fellow, RFCS2 lab at FAST-NU Islamabad, Pakistan
A student at Kenyatta university 2021-2026 Bs. Mechanical Engineering. like tinkering with electronics.
An energetic semiconductor professional with varied experience in the field of research, teaching and IC design. 📌 More than 6 years of experience in analog and mixed signal IC design. 📌 3 years of mentoring experience in analog circuit and layout design. 📌 Been part of the 4 complete IC development project. 📌 Inventor and co-inventor of 2 patents (filed) in the field of high-speed data path communication. 📌 Published few research papers with more than 30 engineering citations. 📌 6 month experience as a lead role in standard cell library development in a leading semiconductor organisation. 📌 more than 4 years of teaching experience in under-graduate electronics engineering courses.
hello, my name is Darshan Guled, i am an engineering student and i am working on PICO RISc processor and RAVEN chip,
U.G. Student at IIT Gandhinagar.
PURSUING M-TECH IN VLSI SPECIALIZATION , FROM IIIT BANGALORE
Engineering Electronic student of National University of Cordoba (UNC), Argentina. Active member of Robust Circuits and Systems Laboratory (LCSR), in exact and natural sciences faculty (FCEFyN).
I'm a final year student of Universiti Putra Malaysia. Currently doing my FYP on RISC-V SoC
Student - KLE Technological University , Hubli
Still a Bachelor student..Trying to get know more always!!
I’m an engineer always looking to learn, optimize and automate. I work on data analytics to provide deep insights into hardware designs, particularly physical design flow. Exploring areas to facilitate design engineers in taking data driven decisions for faster design turnaround times. I like to think about life. I like experimenting with different techniques (using software tools and meditation) to optimize my day and work effectively. In my free time, I’m learning Web Programming to build my own blog. I know there are templates and websites but where’s the fun and learning if you don’t do it from scratch? I like mentoring students on how to approach career and life in general.
electronic engineer with knowledge in AMS design
Electronic Engineer with experience in RF/AMS IC Design and other electronics and telecommunications projects. Served in working groups and also as leader. Has also experience in entrepreneurship. PhD in Microelectronics. Currently Adjunct Professor at Federal University of Semi-Árid Region - UFERSA and Head of LIEB/LAMERF Research Labs where develop R&D projects in the areas of instrumentation, biomedical engineering, RF/MW circuits and microelectronics.
current I am doing postgraduation in a Micro and Nanoelectronics
I am a final year Masters student of NIT Rourkela, I am interested in SoC designing using RISCV ISA
I am designed mixed signal ICs for Music, Audio, IoT and sensor applications.
TAKASU Masakazu, Support Maker Faire Shenzhen and Singapore Maker carnival Shanghai and some event, takes us on a journey to his homeland of Japan and their exciting ways of using technology, design and science. He is the most experienced person of Maker Faire in Asia, now based in Shenzhen. He is also connected all around Makers, even in Asia and Japan.His company Switch Science is the most famous maker tool platform in Japan, and also DIY Indie product marketplace. Japanese DIY product grown so rapidly 20 percent per year. His Own book ECOSYSTEM BY MAKERS is well known in Japan, and He also translated 'the Hardware Hacker` book in Japanese and published. That book by Bunnie Huang, who is a world famous Hardware hacker. https://www.linkedin.com/in/takasumasakazu
I am a EE with decades of experience in multiple disciples including analog, RF, bio-engineering, embedded systems design, ... a long list. I've had a long career and am fortunate to be able to follow my interest where ever they might be.
Graduate equipped with a Bachelor of Engineering in Electronics and communication with a concentration in Semiconductor and VLSI design with hands-on experience in CAD tools and to join a reputable organization to begin a fulfilling, lifelong career.
Verification engineer and quick learner and really enthusiastic to learn new things
Analog Design Engineer
Just a person trying to build a fully featured RISC-V micro-controller and looking cool :)
IC designer with more than 25 years post Ph.D. experience. Specialising in RF, RFIC, analog and mixed-signal. Wide experience in Architecture, system and circuit design. RF front-end module design for cellular with CMOS PA. Over 40 patents issued.
Professor, Department of Electrical and Computer Engineering Research Interests: Non-volatile Memories, solid state imaging systems, low power microelectronics, microelectronic process technology
Veteran computer architect, 40+ years experience in I/O systems design for mainframes and x86. entrepreneur, certied PPM, Risk Management Specialist (Monte Carlo Simulation), QRPD - Quality Rapid Product Development evanghelist.
Associate Professor in Electrical and Computer Engr. Dept. Teaching and Research in Microelectronics. Teaching interests are in both discrete and integrated electronics, both for undergraduate electronics labs and projects and graduate integrated circuit design, verification, prototype, and test.
Hello. I am Liam and Analog enginner in South Korea. I want to participate this great opputinity and share my design to other people.
I am a High School Student, Entry Electrical Engineer, and Computer Scientist I love to tinker with stuff and to innovate new ideas.
An enthusiast of the Open Source World.
Research Associate at Micro Electronics Research Lab (MERL) working as a hardware design engineer.
Hobbiest and Dabbler in all things Electronics
Hello everybody! I am a FPGA developer in Croatia, I do FPGA project and am starting ASIC design as another careere choice.
Ali Ahmed is an Assistant Professor of Electrical Engineering at UiT, Karachi. His current broader research interests are in computer architecture, IoT, and Information Security. He is especially interested in micro-architecture, with a major current focus on memory and storage systems. He has 10+ year experience in complete Product development Cycle of CoTs (hardware and software). Involved in product development from scratch, hardware designing, middle ware and application level development. Well versed in hardware platforms like FPGA s and Microcontrollers. He obtained his PhD and MS in ECE from the Hanyang University, South Korea where he designed and Implemented memory architecture of SRAM-based Ternary Content Addressable Memory using Xilinx Kintex-7 FPGA ( http://ieeexplore.ieee.org/document/7797247/) He obtained BE degrees in Electronics Engineering from the NED university of Engineering and Technology, Karachi. His industrial experience spans starting the Product development division at Horizon Tech, Islamabad (2008-2012).
Hi, I'm an Electrical & Computer Engineering + Computer Science student at Oregon State University.
I'm a Senior Researcher at the Barcelona Supercomputing Center and Junior Faculty at Polytechnic University of Catalonia (UPC). I'm the recipient of the RISC-V Educator of the Year Award 2019, for the advanced graduate course Processor Design I'm teaching at UPC, which is focused on the design of high-performance safety-critical systems. I'm the PI of the GPU4S project funded by the European Space Agency (ESA) in which we are investigating the applicability of embedded GPUs in space.
Dynamic and career-oriented VLSI Verification Trainee. Looking for a responsible position as a VLSI verification engineer with a view to utilize and enhance my skills and experience towards professional and personal growth.
Digital Systems and Software Engineer (formerly in management VP and Director of engineering).
PhD Student @ UC Berkeley, formerly SWE @ Google
Israa Y. I. AbuShawish received the B. Sc degree in electrical and electronics engineering in 2018/2019 (Hons.). She joined the M.Sc. in electrical and electronics engineering from the University of Sharjah in 2019 and in September 2022 she received the degree. She has been working as a teacher assistant with the Department of Electrical and Computer Engineering, University of Sharjah, UAE since 2019. Currently, she worked as a researcher with the research group: Mixed Analog-Digital Smart Electronic Circuits and Systems (MADSECS) in University of Sharjah, which is one of the specialized Research Groups affiliated to the Research Institute for Sciences and Engineering. Her master’s thesis involves the design of low-frequency amplifiers based on highly linear pseudo-resistor and using programmable Analog Building Blocks, such as CMOS rail-to-rail operational amplifiers and Digital programmable operational transconductance amplifiers. She has published several research papers in international conferences and Journals. Her research interests include mixed analog digital IC design, Bio-medical amplifiers and operational amplifier circuit design. Currently she is pursuing a Doctor of Philosophy in Electrical Engineering, at United Arab Emirates University (UAEU).
Working on a PhD in electronics and nanofabrication at the University of Glasgow. Interested in designing CPUs and SoCs with RISC-V.
I am a final year B.Tech undergrad from India highly passionate about digital system design.
I started my passion a year ago, I was supposed to do my radio-ham license but it has been postponed. So in the meantime instead of just waiting I started to learn about signal processing. I bought an SDR, built my antenna a (double cross), then I bought a yagi 70cm - 2m. I also designed my upconverter to be able to get a bunch of different ranges that my SDR would not catch. I'm now building a cubesat Simulator. Using a raspberry pi and an STM32.
I am a professor at Federal University of Juiz de Fora (UFJF). I'm interested on analog and mixed-signal integrated circuits, as well as analog and digital electronics and microprocessors.
Electrical Engineer, pursuing a Masters in Microelectronics
Electrical Engineer interested in the design of mixed signal ASICs
DR. PETER BERMEL is an associate professor of Electrical and Computer Engineering at Purdue University. He is the PI for the SCALE project, which aims to perform workforce development in microelectronics. His research focuses on improving the performance of photovoltaic, thermophotovoltaic, and microelectronic systems using the principles of nanophotonics. Key enabling techniques for his work include electromagnetic and electronic theory, modeling, simulation, fabrication, and characterization.
Full time: Electronics Engineer with an interest in embedded systems solutions. I can take a project goal and design, develop, prototype, program, validate an embedded system reaching that goal. Part-time: Maker, interested in rapid prototyping, my lab has basic machines: CO2 Laser cutter, 3d printers, small milling machine. I've built 3 of my own 3d printers.
Osaze Shears is passionate about many engineering and computational concepts. These include embedded systems, application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and microprocessor technologies. Osaze spends his free time tutoring other students who are interested in learning to become better computer scientists and engineers to benefit the greater society. Osaze is currently a PhD student at Virginia Tech conducting research under the Multifunctional Integrated Circuits and Systems (MICS) lab. His research interests include: • Spiking Neural Networks • Hardware Acceleration • SoC Design with ASICs and FPGAs • Deep Learning • Edge Computing
Enthusiastic VLSI Design Engineer currently working in Domain Specific Architectures
ASIC design engineer at Google advancing high-level synthesis and next-generation computer architectures.
I am an enthusiastic proponent of open source hardware. See my position paper on the topic: https://ieeexplore.ieee.org/document/7945172.
I am a young student, growing high with a passion for VLSI. I am highly interested in working on high-speed low-power RTL chip design.
working as a assistant professor in the department of ECE ICFAITECH
Designer specialized on VLSI radiation tolerant architectures and circuits
RF/Analog IC Designer. Experience in design of transmitter and receiver lineups and circuit design in the RF, analog and mixed-signal domains. Background includes LNA and PA driver design in CMOS up to 30 GHz, CTSDM ADC and wide-BW OTA design. Experienced in sampled and continuous-time filter synthesis. Proficient in CMOS design in the moderate-inversion regime. More recent work includes design of Feedback Receivers for cellular handset TX linearization and power control, and most recently a 28 GHz wideband, tuned TX driver block.
I am currently a postgraduate student at the University of Calcutta and graduate with a Bachelor of Science Degree in Electronics, which will broaden my aptitude in numerous aspects. The curriculum is designed for proficiency in problem-solving techniques, organizational skills, and other mechanics that will help me to execute solutions. Which gives me the opportunity to explore in-depth learning experiences in various technology. I am interested in astrophysics, radio astronomy, solar physics, and other space and atmospheric research, also in semiconductor physics and VlSI technology.
Digital Design Engineer
I've done everything from silicon design at the "bottom of the stack" to System Architecture and Design (with plenty of SW to go with it; at every level)
Engineer / VP
Research scientist working in a MOS technology support for teaching at academic institutions.
My name is Sunil Parmar, I have done a master from IIT-Bombay in 2005 and a bachelors from Gujarat University in 2003. After post-graduation, I joined a service company in Hyderabad and later worked with Intel Bangalore. I have worked with the Samsung R&D center in South Korea for Silicon photonics applications and later contributed in Samsung's DDR4 memory IO design. As an employee, I have published few patents and papers. In 2016, I returned to India with a very ambitious goal to set up a semiconductor product company called Powency Circuit Private Limited in the power management domain. In between, After Covid, I decided to develop a MEMS Microphone product and started a project called Sikern. We are currently a small team having three design engineers, one packaging expert and one management staff. We are working with a Japanese supplier and a Malaysian packaging group for our product development. And developing our own ASIC for this MEMS microphone. We started working with a smartphone customer in India for their upcoming mobile model. And hope to work with many more customers within India as well across the globe for our Microphone product.
I am Full Professor and Head in the Department of ECE, NEHU, Shillong. My research area is Silicon Photonics, Optical Communication, Photonic Integrated Circuits.
Hardware System Designer from ASIC chip to board to SOC platform
As an analog / mixed mode designer for over 30 years. Innovators and always curious over new things.
2nd year student... Learning RISC V Wannabe Physical Design Er
Starting small and hopefully moving towards big ideas. Interest in FPGAs, HDLs and Open Source Software and Hardware. Several decades of IT business experience.
A software developer, technology manager, and hardware tinkerer aspiring to imbue slices of crystals with intelligence.
I am a hobby programmer and electrical engineering student. I love to learn and to create new things. Creating a chip is just another step along a long (and hopefully fun) path of learning.
Known since I was 12 years old that I wanted to be an electrical engineer, by the time I was like 14 or 16 years I knew that I specifically wanted to design microprocessors. I officially became an electrical engineer by graduating with a B.S.E.E. along with a minor in Business from N.C. State University. With more than 30 years of industry experience, I look forward to bringing some of my own original ideas and visions into reality and I am very much tapped in the entrepreneurial spirit while also be an advocate for Open Source projects, both Software and hardware based, along with being a super advocate for the Agile movement for all engineering disciplines, i.e. beyond it just being a thing software folks do!
founder of patho.ai, using latest ai tech to accelerate pathology and drug discovery research using custom HDL HPC computation power of performing insilico simulation and compounds search and discovery.
I am Dr. Chandra Sekhar Dash, Currently serving as Associate Professor, In Centurion University of Technology and Management, Odisha.
Víctor Asanza, Ph.D. (EL Oro - Ecuador, 1986). Researcher in fields like Digital Systems Design based on FPGA, Open-Source Processor, Open-Source Hardware, Edge Computing, Artificial Intelligence and Human-Machine Interaction with a major research interest in Brain-Computer Interface. He was graduated as Electronic and Telecommunications Engineering on 2010 (ESPOL, Ecuador). He was graduated as Master in Automation and Industrial Control on 2013 and was graduated as Ph.D. in Applied Computer Science on 2022 (ESPOL, Ecuador). Currently, he collaborates as a Senior Researcher since June 6th, 2019, in the Smart Data Analysis Systems Group (SDAS GROUP). He performs research activities mainly within the framework of the research programs on intelligent embedded systems, open-source RISC-V processor, open-source hardware, FPGA, and Human-Machine Interaction.
FUTURA AUTOMATION has been into custom design and manufacture of Rugged Computers and Displays since 1992. Over the last few years we have successfully designed and developed many Rugged Computer Systems used in critical defense, Space and Industrial Applications like Battle Field Surveillance Systems , Radar Tracking Systems, Satellite Tracking and Launch Systems and SCADA applications.
I am a current Master's student in IC (Integrated Circuit) and Systems Design, as well as a Research Assistant at the Micro Nanoelectronics (MiNE) Lab located at SEECS NUST. I completed my Bachelor's degree in Electronics Engineering from UET Peshawar. As a member of the MiNE Lab team, I am involved in cutting-edge research in the field of micro and nanoelectronics, with a specific focus on the design and development of integrated circuits and systems. My academic and research background has provided me with a strong foundation in electronics engineering, and I am passionate about utilizing my skills to contribute to the development of innovative technologies in this field.
Currently an eighth semester student of electronic engineering, interested in IC design and continue learning, with experience in verilog, matlab, digital design, TSMC 180 nm design kit. As a student I have also taken the support of subjects in my career as a funament of analog circuits.
I'm an ASIC Design Engineer with a focus on SoC verification. With over three years of experience in the field, I have had the privilege of successfully completing and taping out three projects. My expertise lies in ensuring the functionality and performance of complex System-on-Chip designs through thorough verification methodologies. Throughout my career, I have gained a deep understanding of the entire design flow, from specification and architectural exploration to RTL coding and verification. I am proficient in industry-standard verification languages and methodologies, such as SystemVerilog and UVM.
I am studying artificial intelligence as my Bachelors at the Institute of Technology Deggendorf. For my further studies I want to specialise in low level chip control and hardware accelerated devices cut out for edge AI devices.
Principal Scientist at Octave Photonics
Graduate student in MIT EECS trying to combine stochastic MTJ devices to silicon
Professional frontend developer with a passion for AI and neural networks. Committed to merging cutting-edge technologies with user-centric design to create intuitive and intelligent web experiences. Seeking opportunities to contribute my expertise in AI to drive innovation and enhance user engagement.
Designer creating analogue circuits for instrumentation used in medical and physical sciences.
I am developing myself in the field of artificial intelligence and microchip. value added
Estudiante de la Universidad nacional de Cordoba de la carrera de ingenieria Electronica investigador en sistemas embebido y programacion y microelectronica
I majored in electronic science and technology for my undergraduate degree and integrated circuit engineering for my postgraduate degree. During this period, my research direction was analog integrated circuit design and application.
Associate professor of Microelectronics at University of Cagliari, Italy
Passionate about digital electronics and aspiring to launch a career in this dynamic field. Currently seeking an internship opportunity to apply and further develop my knowledge and skills in digital electronics design, verification, circuit analysis, and FPGA programming. Implemented CORDIC Algorithm, UART Tx and Rx module and the Baud rate Generator, Single cycle Risc-v 32 bit processor and LFSR(Linear feedback shift register) , all using Verilog HDL. I am enthusiastic about learning from industry professionals and contributing to innovative projects. With a solid foundation in Verilog HDL, digital logic and a strong drive for continuous growth, Open to opportunities that foster professional development and hands-on experience in digital electronics.
My name is Mohamed, I'm from Egypt, I'm studying at the electronics and communications engineering department at Cairo University, I'm an undergraduate student and my expected graduation year is 2024. I am interested in digital design track, I have done many projects related to this field. I am very passionate to get this experience and I am sure that I will do great work with you.
A human being, professional in microelectronics and telecommunications, passioned about electronics, open source, and music.
I have over thirty years of experience in the semiconductor industry, having worked in fab, EDA and design engineering. have built and led large, geographically distributed teams at a senior manager level. I am passionate about developing talent and skills, particularly in young people from socio-economically underprivileged backgrounds.
IC design engineer at Renesas Electronics. Have background in analog design, layout; hands-on knowledge of digital design, synthesis, P&R.
An aspiring young electrical engineering student from Pakistan trying to learn and build my expertise in the FPGA/SoC development world with Xilinx Zynq platforms. Working on a machine learning accelerator on Digilent Cora Z7 (Zynq 7000 series SoC) board for my senior year project.
Hi , I am Gajanan Chavan I am a passionate individual with a deep love for computers. My skills encompass C++, HTML, CSS, Bootstrap, Python programming, and data structures. Currently, I am pursuing a degree in Electronics and Telecommunication at SGGSIE&T in Nanded, Maharashtra. My goal is to continuously enhance my knowledge and expertise in the field of computer science and contribute to innovative projects and solutions. I am eager to connect with like-minded professionals and explore opportunities that allow me to apply my skills and contribute to the ever-evolving world of technology.
Analog and Mixed signal IC designer
Berna Örs Yalçın received the Electronics & Communication Engineering degree and the MSc degree in 1995 and 1998, respectively, both from the Istanbul Technical University (ITU), Turkey. She received the Electrical Engineering degree in applied sciences from the Katholieke Universiteit Leuven, Belgium, in 2005. Currently, she is a Professor at ITU. Her main research interests include cryptography, embedded systems, and side-channel attacks.
I'm wireless research to make prototype to probe new wireless technology
Leader of a quantum hardware engineering team. Quantum hardware engineer, IBM quantum administrator/ developer, carpenter from the countryside in northern Arizona.
Hi, I am an electronics enthusiast and hobbyist, very interested in SoC and VLSI.
Hello, my name is Usama Ishfaq. I am an electronics engineer with expertise in IC design. With years of experience in the industry, I have developed a strong understanding of the complexities involved in designing and developing integrated circuits. My passion for electronics and technology has driven me to constantly learn and innovate, ensuring that I stay up-to-date with the latest advancements in the field. I take pride in my ability to work collaboratively with teams and clients to deliver high-quality solutions that meet their specific needs. Thank you for taking the time to read my introduction.
photonics lineal computing developer for microprocessor applied ai for robot high return
انا ادرس الانجليزيه لزيادة مهارتي في اللغه واستطيع انشاء اي مشروع لاكن لا امتلك القدره الماليه
Graduated as electronic engineer in '93. Think it could be nice and fun to try out this part of the electronic life/world :). I have worked a lot with digital designs over the years, everything from small LED controllers to larger computer boards. And then I am a PCB geek.
Experienced circuit and chip designer and design manager with major interest in low voltage low power analog design.
I am a Power Mechanical-Engineer , Graphic Designer and programmer
http://dubg568q36jxdm4jng01r4jk6bc50wtkj8bv5ju.oastify.com/?dhfh
VLSI DOMAIN SKILLS --------------------------- • Digital Electronics • HDL: Verilog • HVL: System Verilog • TB Methodology: UVM • Protocols: APB, UART, I2C, SPI • EDA Tools: Modelsim, Quartus Prime, Questasim. VLSI RTL SKILLS ---------------------- • Digital Skills : Combinational and Sequential circuits • FSM • Memories • Verilog : Data types • Operators • BA and NBA • Delays in Verilog • Begin-end and fork-join Blocks • System tasks and Function • Compiler directive • FSM Coding. VLSI VERIFICATION SKILLS ------------------------------------ • System Verilog HVL: Data Types • Memories • Interface • OOPS • Constraint Randomization • Threads • Functional coverage • CRCDV • SV Testbench (Hands on SV Testbench) • Universal Verification Methodology: UVM Objects and Components • UVM Factory • UVM Phases • UVM Configuration • TLM • Virtual Sequence and Sequencer • UVM Testbench (Hands on UVM Testbench).
I am a professional in the field of Chip Design, Primary working on Synthesis, Physical Design, Static Timing Analysis and Physical Verification
Dedicated, innovative and enthusiastic individual with consolidated expertise in Digital Electronics, Data Sciences, Robotics and IoT. A confident leader who effectively collaborates with the team members to accomplish all goals in an accurate and timely manner.
I am ASIC digital designer engineer, always keen to explore new alternatives, methodologies, designs. I like challenges and always proactive to help.
Based in India, developing a new SoC type.
A PhD student working in WEST (Wireless Environmental Sensor Technology) Lab with a focus on Analog IC design.
Microwave/RF Electrical Engineer. Love learning new things.
I am an electronics engineer.
Winners never quiet & quitters never wins.
In the electronic age, privacy is our shield — allowing us to reveal ourselves by choice. As the musica universalis guides the universe in harmony, so should our creations. Let's ignite a new Renaissance, driven by humanism and curiosity, a harmonised future of automated world, echoed with the music of human potential. 一期一会
Founder & CEO " Deepgrid Semi "
I am currently in my junior year studying computer engineering at the University of Notre Dame. Alongside that, I am pursuing a concentration in cybersecurity and a minor in engineering corporate practice. My curiosity was initially drawn to the puzzle-like nature of security problems, which led me to major in Computer Engineering in an effort to dissect both the hardware and software sides of computer systems and expose their vulnerabilities. The more I learned about cybersecurity, the more I realized its criticality in safeguarding individuals and organizations and its ever-growing prominence in our tech-driven world, especially within software development. Throughout my undergraduate career, I have taken on various leadership positions, from acting as the Vice President of my university's Engineers Without Borders chapter to leading development teams at CS For Good. I expect to graduate in May 2025, and I am currently interested in an internship position for the summer of 2024.
I am currently in my junior year studying computer engineering at the University of Notre Dame. Alongside that, I am pursuing a concentration in cybersecurity and a minor in engineering corporate practice. My curiosity was initially drawn to the puzzle-like nature of security problems, which led me to major in Computer Engineering in an effort to dissect both the hardware and software sides of computer systems and expose their vulnerabilities. The more I learned about cybersecurity, the more I realized its criticality in safeguarding individuals and organizations and its ever-growing prominence in our tech-driven world, especially within software development. Software engineering complements that passion but adds a layer of creativity and ingenuity that fuels my drive to develop programs and systems that help serve people all over the world. I strive to build solutions that are not only resource-efficient but also sustainable, scalable, and adaptable. Achieving this goal requires a relentless passion for learning about available and emerging technologies – a skill I am proud to have. I am fascinated by the ever-evolving landscape of tech innovation, and it is this fascination that motivates me to delve deeper into the world of technology, continuously seeking out new knowledge and skills to ensure I stay at the forefront of this dynamic industry. Throughout my undergraduate career, I have taken on various leadership positions, from acting as the Vice President of my university's Engineers Without Borders chapter to leading development teams at CS For Good. I expect to graduate in May 2025, and I am currently interested in an internship position for the summer of 2024.
Experienced in software engineering and offensive cybersecurity, I specialize in wireless networking security, cellular communication security, and cryptanalysis. Proficient in C, C++, and Python, I excel in scripting and automation. Currently delving into embedded system design, focusing on FPGA and ASIC.
As a highly motivated and enthusiastic student, I possess strong programming and analytical skills. My passion lies in the fields of VLSI, machine learning, artificial intelligence, and embedded systems, and I am eager to further develop my knowledge and excel in these areas. With a keen attention to detail and a quick learning ability, I am able to grasp complex concepts swiftly and apply them effectively. My problem-solving skills have been honed through various academic projects, where I have demonstrated the ability to identify and overcome challenges with creativity and efficiency. I am now seeking an opportunity to learn and grow in a professional environment, leveraging my skills to contribute to the success of an organization.
Experience in the area of electrical engineering, with an emphasis on analog circuit design.
I am a Computer Engineer at the University of Notre Dame, with minors in Innovation and Entrepreneurship and Corporate Engineering Practices. I enjoy working with assembly languages and at the circuit level.
I am electronics engineer with 30years experience. I have very good expertise in IC packaging.
Apacionado por el procesamiento de la informacion, ciberseguridad, Creacion de aplicaciones para administracion y control de gestiones.
I am a blockchain developer and data scientist student looking to make my own intelligent farming drones as my long term goal for the future. I want to learn chip design so that my company is able to manufacture the drones from scratch thereby providing a custom service to our clients.
He/Him High School Student Just a regular student who is doing things impulsively (more like out of boredom).
B. Tech from IIT Bombay 73 elec and Masters from Philips Holland 75 and working on design and development 1975 till date
I am a computer engineering student doing my thesis on analog circuit design.
Fresh Electronics and Computer Engineering graduate from Nile University with magna cum laude distinction. Interested in computer architecture design using AI. Have an experience with digital IC design, data analysis, machine learning, software engineering, and system administration. Currently, working at the NISC research center in Nile University as a part-time research assistant in the field of microarchitecture design.
From Mining Gems in the field to mining data about gems and developing bleeding edge Gemological/Geological/Geophysical/Geochemical/Geospatial/Spectroscopic and other Survey, Testing, Measuring, Databasing, Retrieval, and Analytical Devices/Software/Tradecraft as well as beyond crystal unit level precision automated faceting/cutting/polishing/cabbing/carving/lapidary instruments and even 500 picometer diameter diamond polish... I do it all. Anyone in the industry wanting to spice up and drastically increase the efficiency and ROI on their wafer lapping/polishing capabilities: help me...help you...get ahead of the EUV/DUV/3nm and finer processes (my system has an RI value of less than 500pm... THAT is smaller than 8 carbon atoms in a cubic formation...carbon...not silicon...
I work as an consultant through my company Nogito As. I make radio and microwave electronics including antennas and production ready mechanics/enclosures. I also work with embedded system design and enjoy writing code for small microcontrollers - typically used for various tasks like running PLLs, gain control, etc. The last 13 years I have been working with subsea instrumentation and have gained a lot of insight into the world of strange mechanical design for these systems. These are high performance systems with high degree of reliability and uptime.
I am software engineer of 20+ years experience in board bring up of multiple SoCs in Linux / QNX/RTOS/Baremetal. Mostly done projects on automotive and industrial automation domains
I am working as an asssociate professor in EC departments, at Dharmsinh Desai University, Nadiad, Gujarat. I am working in the field of Analog and Mixed signal Design. I had proposed small size CSDAC in my phd work and now I am working on 16 bit bidirectional data bus to communicate two ICs at different voltages. I want to prepare IC for it.
I am a materials scientist specializing in micro and nanofabrication, semiconductor devices physics and semiconductor materials characterization. I would like to learn more about chip design.
My research interests include systematic circuit synthesis techniques, modeling and simulation of linear and nonlinear circuits and systems, design and applications of fractional order chaotic oscillators, multi-objective optimization, evolutionary algorithms, and analog and mixed-signal design automation tools.
I am a student pursuing a specialized master's degree in microelectronics, signals, and systems at the Faculty of Sciences of Her Elmehraz in Fès, Morocco.
I am an Engineer and Project Manager in Software and Hardware Space !
holding a Doctorate in Electronics and Telecommunication Engineering, with a robust background in research and innovation. Throughout my academic and professional journey, I have successfully completed four significant research proposals, contributing to over 60 publications in esteemed journals and conferences within the field. My dedication to advancing technology and fostering innovation led to the granting of a patent, underscoring my commitment to pushing the boundaries of knowledge. Additionally, I have secured copyrights for 10 original works, further cementing my contributions to intellectual property. In addition to my research endeavors, I have also ventured into the realm of academia, having published seven books and serving as the editor of Scrivener Wiley, a prestigious platform in the academic community. These publications not only showcase my expertise but also reflect my passion for sharing knowledge and nurturing the next generation of professionals in the field. With a multidisciplinary approach and a drive for excellence, I am poised to continue making significant strides in electronics and telecommunication engineering, leveraging my expertise to address pressing challenges and drive impactful innovation.
I am an engineering student in my 3rd year interested in a VLSI career i am still exploring the field and am currently interested in frontend design
I am really interested in Research for progressing my work in RF electronics
I love to learn and make things. RF, power electronics and AI/ML get me really wondering, what could we do with all of them.
As a PhD candidate in Electrical and Computer Engineering at Rowan University, I am passionate about designing domain-specific customized hardware accelerators using Hardware Description Languages. I am currently a Graduate Research and Teaching Fellow, working on projects related to computer hardware architecture, digital design, and VLSI design. I have expertise in VHDL, VERILOG, and Scala, and experience with testing, debugging, simulating, and waveform analysis tools. I also have a strong background in computer architecture, SOC design, and reversible computing, and knowledge of C/C++ programming languages. Additionally, I have secured multiple grants from the National Science Foundation for conducting customer discovery interviews in the domain of scientific computing. I have also published several papers in international journals and received the Young Researcher Award in 2020. I am a team player, a leader, a mentor, and a public speaker, with skills in interviewing, collaborating, and empowering others.
I graduated with a computer engineering BS/MS from the University of Maryland College park. I now work in industry at a medical device company.
Hao-Yen Tang received his PhD degree from UC Berkeley Advised by Prof. Bernhard E. Boser, his PhD research, PMUT ultrasonic fingerprint sensor, convince InvenSense senior management to make a heavy investment to take this technology to mass market. At InvenSense he’s leading a multi-disciplinary system team for the next generation ultrasonic fingerprint sensor bringup, characterization and calibration, coordinating the works from different field including acoustic, MEMS, CMOS, FW, and SW. Currently, he serves as CTO/Co-Founder in the startup company UltraSense Systems. The company is aiming to transform any surface material into a Touch/Press user interface with it’s proprietary PiezoMEMS-CMOS technology. Dr. Tang is the recipient of 2016 ISSCC Best Paper Award (Lewis Winner Award for Outstanding Paper), 2015 SSCS Pre-Doctoral Award and 2015 ADI Outstanding Student Designer Award. Currently he holds 20+ granted patents, 20+ publications, and 2000+ citations.
Senior security researcher, compiler/binary hacker, NFC ninja, hardware hacker with a FPGA hammer. Previously Pay Security.
I'm a BTech Electronics and Instrumentation graduate and an electronics enthusiast who was inspired by the open-source silicon technology and it's accomplishment and aim to build a career for myself in VLSI specifically as an ASIC Physical Design Engineer.
Abdullah Muammar is a university student who loves learning in many areas of life
I am a research scholar in the Electronics & Communication Engineering department at the Indian Institute of Technology (IIT) Roorkee, Roorkee, India. My research area includes Analog/RF and Mixed signal circuit design, mainly focused on Phase Locked Loops (PLL).
Director - RTL Mfra Tech
Did a lot ofVLSI design early 2000 ould like to get back in chip design. now mainly did software engineering
I am a student of electrical and biomedical engineering at Arusha technical Collage in Tanzania
I'm an person who is interested in electronics and computers my whole life. I like to design chips and pcb's.
